| Message ID | 1395912416-20087-6-git-send-email-phil.edworthy@renesas.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hello. On 27-03-2014 13:26, Phil Edworthy wrote: > This patch adds the bindings for the R-Car PCIe driver. The driver > resides under drivers/pci/host/pcie-rcar.c > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > v6: > - Correct DT bindings description for reg and clocks > v5: > - Add PCIe bus clock reference > - Add additional interrupt bindings > - Use dma-ranges property to specify inbound memory regions Put these under --- tear line, please. > --- > Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 ++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt > new file mode 100644 > index 0000000..a97ebe6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt > @@ -0,0 +1,45 @@ > +* Renesas RCar PCIe interface > + > +Required properties: > +- compatible: should contain one of the following > + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791" > +- reg: base address and length of the pcie controller registers. > +- #address-cells: set to <3> > +- #size-cells: set to <2> > +- device_type: set to "pci" > +- ranges: ranges for the PCI memory and I/O regions. > +- dma-ranges: ranges for the inbound memory regions. > +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt > + source for hardware related interrupts (e.g. link speed change). > +- #interrupt-cells: set to <1> > +- interrupt-map-mask and interrupt-map: standard PCI properties > + to define the mapping of the PCIe interface to interrupt > + numbers. > +- clocks: from common clock binding: phandles to PCIe controller and PCIe bus > + clocks. I told it's not only phandles (e.g. &mstp3_clks) but the clock specifiers. WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sergei, On: 27/03/2014 11:08, Sergei wrote: > Subject: Re: [PATCH v6 05/10] dt-bindings: pci: rcar pcie device tree bindings > > Hello. > > On 27-03-2014 13:26, Phil Edworthy wrote: > > > This patch adds the bindings for the R-Car PCIe driver. The driver > > resides under drivers/pci/host/pcie-rcar.c > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > > > v6: > > - Correct DT bindings description for reg and clocks > > > v5: > > - Add PCIe bus clock reference > > - Add additional interrupt bindings > > - Use dma-ranges property to specify inbound memory regions > > Put these under --- tear line, please. > > > --- > > Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 ++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt > > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/ > Documentation/devicetree/bindings/pci/rcar-pci.txt > > new file mode 100644 > > index 0000000..a97ebe6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt > > @@ -0,0 +1,45 @@ > > +* Renesas RCar PCIe interface > > + > > +Required properties: > > +- compatible: should contain one of the following > > + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791" > > +- reg: base address and length of the pcie controller registers. > > +- #address-cells: set to <3> > > +- #size-cells: set to <2> > > +- device_type: set to "pci" > > +- ranges: ranges for the PCI memory and I/O regions. > > +- dma-ranges: ranges for the inbound memory regions. > > +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt > > + source for hardware related interrupts (e.g. link speed change). > > +- #interrupt-cells: set to <1> > > +- interrupt-map-mask and interrupt-map: standard PCI properties > > + to define the mapping of the PCIe interface to interrupt > > + numbers. > > +- clocks: from common clock binding: phandles to PCIe controller and PCIe bus > > + clocks. > > I told it's not only phandles (e.g. &mstp3_clks) but the clock specifiers. Ah, yes you did. Thanks Phil -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt new file mode 100644 index 0000000..a97ebe6 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -0,0 +1,45 @@ +* Renesas RCar PCIe interface + +Required properties: +- compatible: should contain one of the following + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791" +- reg: base address and length of the pcie controller registers. +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt + source for hardware related interrupts (e.g. link speed change). +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: phandles to PCIe controller and PCIe bus + clocks. +- clock-names: from common clock binding: should be "pcie" and "pcie_bus". + +Example: + +SoC specific DT Entry: + + pcie: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000 + 0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; + interrupts = <0 116 4 0 117 4 0 118 4>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 4>; + clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + };
This patch adds the bindings for the R-Car PCIe driver. The driver resides under drivers/pci/host/pcie-rcar.c Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> v6: - Correct DT bindings description for reg and clocks v5: - Add PCIe bus clock reference - Add additional interrupt bindings - Use dma-ranges property to specify inbound memory regions --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt