@@ -30,6 +30,7 @@ Required properties:
"ti,am3-dpll-clock",
"ti,am3-dpll-core-clock",
"ti,am3-dpll-x2-clock",
+ "ti,omap2-dpll-core-clock",
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : link phandles of parent clocks, first entry lists reference clock
@@ -41,6 +42,7 @@ Required properties:
"mult-div1" - contains the multiplier / divider register base address
"autoidle" - contains the autoidle register base address (optional)
ti,am3-* dpll types do not have autoidle register
+ ti,omap2-* dpll type does not support idlest / autoidle registers
Optional properties:
- DPLL mode setting - defining any one or more of the following overrides
@@ -73,3 +75,10 @@ Examples:
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x90>, <0x5c>, <0x68>;
};
+
+ dpll_ck: dpll_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-dpll-core-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0500>, <0x0540>;
+ };
@@ -276,7 +276,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
/* clksel_rate blocks shared between OMAP44xx and AM33xx */
@@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate);
unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate);
-unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
unsigned long parent_rate);
@@ -42,6 +42,15 @@ static const struct clk_ops dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
};
+#ifdef CONFIG_ARCH_OMAP2
+static const struct clk_ops omap2_dpll_core_ck_ops = {
+ .get_parent = &omap2_init_dpll_parent,
+ .recalc_rate = &omap2_dpllcore_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap2_reprogram_dpllcore,
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP3
static const struct clk_ops omap3_dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
@@ -237,10 +246,25 @@ static void __init of_ti_dpll_setup(struct device_node *node,
init->parent_names = parent_names;
dd->control_reg = ti_clk_get_reg_addr(node, 0);
- dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
- dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
- if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg)
+ /*
+ * Special case for OMAP2 DPLL, register order is different due to
+ * missing idlest_reg, also clkhwops is different. Detected from
+ * missing idlest_mask.
+ */
+ if (!dd->idlest_mask) {
+ dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1);
+ clk_hw->ops = &clkhwops_omap2xxx_dpll;
+ omap2xxx_clkt_dpllcore_init(&clk_hw->hw);
+ } else {
+ dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
+ if (!dd->idlest_reg)
+ goto cleanup;
+
+ dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
+ }
+
+ if (!dd->control_reg || !dd->mult_div1_reg)
goto cleanup;
if (dd->autoidle_mask) {
@@ -547,3 +571,18 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
}
CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
of_ti_am3_core_dpll_setup);
+
+static void __init of_ti_omap2_core_dpll_setup(struct device_node *node)
+{
+ const struct dpll_data dd = {
+ .enable_mask = 0x3,
+ .mult_mask = 0x3ff << 12,
+ .div1_mask = 0xf << 8,
+ .max_divider = 16,
+ .min_divider = 1,
+ };
+
+ of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd);
+}
+CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock",
+ of_ti_omap2_core_dpll_setup);
@@ -255,6 +255,11 @@ int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap3_clk_lock_dpll5(void);
+unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -283,6 +288,7 @@ static inline void of_ti_clk_allow_autoidle_all(void) { }
static inline void of_ti_clk_deny_autoidle_all(void) { }
#endif
+extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/clock/ti/dpll.txt | 9 ++++ arch/arm/mach-omap2/clock.h | 1 - arch/arm/mach-omap2/clock2xxx.h | 4 -- drivers/clk/ti/dpll.c | 45 ++++++++++++++++++-- include/linux/clk/ti.h | 6 +++ 5 files changed, 57 insertions(+), 8 deletions(-)