diff mbox

[v2,10/14] Documentation: mfd: s2mps11: Document support for S2MPS14

Message ID 1392282847-25444-11-git-send-email-k.kozlowski@samsung.com
State Superseded, archived
Headers show

Commit Message

Krzysztof Kozlowski Feb. 13, 2014, 9:14 a.m. UTC
Add bindings documentation for S2MPS14 device to the s2mps11 driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Comments

Tomasz Figa Feb. 13, 2014, 2:55 p.m. UTC | #1
Hi,

On 13.02.2014 10:14, Krzysztof Kozlowski wrote:
> Add bindings documentation for S2MPS14 device to the s2mps11 driver.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Tomasz Figa <t.figa@samsung.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> ---
>   Documentation/devicetree/bindings/mfd/s2mps11.txt |   12 ++++++++----
>   1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 15ee89c3cc7b..f69bec294f02 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -1,5 +1,5 @@
>
> -* Samsung S2MPS11 Voltage and Current Regulator
> +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
>
>   The Samsung S2MPS11 is a multi-function device which includes voltage and
>   current regulators, RTC, charger controller and other sub-blocks. It is
> @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>   addressed by the host system using different I2C slave addresses.
>
>   Required properties:
> -- compatible: Should be "samsung,s2mps11-pmic".
> +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
>   - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>
>   Optional properties:
> @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
>   as per the datasheet of s2mps11.
>
>   	- LDOn
> -		  - valid values for n are 1 to 38
> +		  - valid values for n are:
> +			- S2MPS11: 1 to 38
> +			- S2MPS14: 1 to 25
>   		  - Example: LDO1, LD02, LDO28
>   	- BUCKn
> -		  - valid values for n are 1 to 10.
> +		  - valid values for n are:
> +			- S2MPS11: 1 to 10
> +			- S2MPS14: 1 to 5
>   		  - Example: BUCK1, BUCK2, BUCK9
>
>   Example:
>

Acked-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 15ee89c3cc7b..f69bec294f02 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@ 
 
-* Samsung S2MPS11 Voltage and Current Regulator
+* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,7 @@  interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
@@ -59,10 +59,14 @@  supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
 as per the datasheet of s2mps11.
 
 	- LDOn
-		  - valid values for n are 1 to 38
+		  - valid values for n are:
+			- S2MPS11: 1 to 38
+			- S2MPS14: 1 to 25
 		  - Example: LDO1, LD02, LDO28
 	- BUCKn
-		  - valid values for n are 1 to 10.
+		  - valid values for n are:
+			- S2MPS11: 1 to 10
+			- S2MPS14: 1 to 5
 		  - Example: BUCK1, BUCK2, BUCK9
 
 Example: