| Message ID | 1389372599-14180-1-git-send-email-vbridgers2013@gmail.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi! On Fri, Jan 10, 2014 at 10:49:59AM -0600, Vince Bridgers wrote: > This change adds a parameter for the Synopsys 10/100/1000 > stmmac Ethernet driver to configure the maximum MTU supported > by the EMAC instance. Synopsys allows the FIFO sizes to > be configured when the cores are built for a particular > device, but do not provide a way for the driver to read > information from the device about the maximum MTU size > supported as limited by the device's FIFO size. > > This patch has been tested with changes being submitted > seperately for the Synopsys 10/100/1000 stmmac driver. > > Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> > --- > Documentation/devicetree/bindings/net/stmmac.txt | 5 +++++ > arch/arm/boot/dts/socfpga_cyclone5.dtsi | 19 +++++++++++++++++++ > 2 files changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt > index eba0e5e..7db314e 100644 > --- a/Documentation/devicetree/bindings/net/stmmac.txt > +++ b/Documentation/devicetree/bindings/net/stmmac.txt > @@ -30,6 +30,10 @@ Required properties: > > Optional properties: > - mac-address: 6 bytes, mac address > +- snps,max-mtu: Maximum MTU permitted. This parameter is useful since > + different implementations of the Synopsys MAC may have > + different FIFO sizes depending on the selections > + made in Synopsys Core Consultant. > > Examples: > > @@ -40,5 +44,6 @@ Examples: > interrupts = <24 23>; > interrupt-names = "macirq", "eth_wake_irq"; > mac-address = [000000000000]; /* Filled in by U-Boot */ > + snps,max-mtu = <3800>; > phy-mode = "gmii"; > }; > diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi > index a8716f6..b6b39dd 100644 > --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi > +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi > @@ -63,3 +63,22 @@ > }; > }; > }; > + > +&gmac1 { > + phy-mode = "rgmii"; > + snps,phy-addr = <0xffffffff>; /* probe for phy addr */ > + > + rxd0-skew-ps = <0>; > + rxd0-skew-ps = <0>; > + rxd1-skew-ps = <0>; > + rxd2-skew-ps = <0>; > + rxd3-skew-ps = <0>; > + txen-skew-ps = <0>; > + txc-skew-ps = <2600>; > + rxdv-skew-ps = <0>; > + rxc-skew-ps = <2000>; This all seems to be unrelated to the patch description and there isn't even any binding documentatation (or is that in another patch ?). Additionally these don't seem to be properties that apply to all cyclone5 based boards, so they don't belong here. > + snps,max-mtu = <3800>; > + altr,sysmgr-phy-mask = <0xC>; > + status = "okay"; ^^^^ At least this is only valid for boards that use gmac1. Put this in a boardspecific DT. Regards, Steffen
On 1/10/14 2:00 PM, Steffen Trumtrar wrote: > Hi! > > On Fri, Jan 10, 2014 at 10:49:59AM -0600, Vince Bridgers wrote: >> This change adds a parameter for the Synopsys 10/100/1000 >> stmmac Ethernet driver to configure the maximum MTU supported >> by the EMAC instance. Synopsys allows the FIFO sizes to >> be configured when the cores are built for a particular >> device, but do not provide a way for the driver to read >> information from the device about the maximum MTU size >> supported as limited by the device's FIFO size. >> >> This patch has been tested with changes being submitted >> seperately for the Synopsys 10/100/1000 stmmac driver. >> >> Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> >> --- >> Documentation/devicetree/bindings/net/stmmac.txt | 5 +++++ >> arch/arm/boot/dts/socfpga_cyclone5.dtsi | 19 +++++++++++++++++++ >> 2 files changed, 24 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt >> index eba0e5e..7db314e 100644 >> --- a/Documentation/devicetree/bindings/net/stmmac.txt >> +++ b/Documentation/devicetree/bindings/net/stmmac.txt >> @@ -30,6 +30,10 @@ Required properties: >> >> Optional properties: >> - mac-address: 6 bytes, mac address >> +- snps,max-mtu: Maximum MTU permitted. This parameter is useful since >> + different implementations of the Synopsys MAC may have >> + different FIFO sizes depending on the selections >> + made in Synopsys Core Consultant. >> >> Examples: >> >> @@ -40,5 +44,6 @@ Examples: >> interrupts = <24 23>; >> interrupt-names = "macirq", "eth_wake_irq"; >> mac-address = [000000000000]; /* Filled in by U-Boot */ >> + snps,max-mtu = <3800>; >> phy-mode = "gmii"; >> }; >> diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi >> index a8716f6..b6b39dd 100644 >> --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi >> +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi >> @@ -63,3 +63,22 @@ >> }; >> }; >> }; >> + >> +&gmac1 { >> + phy-mode = "rgmii"; >> + snps,phy-addr = <0xffffffff>; /* probe for phy addr */ >> + >> + rxd0-skew-ps = <0>; >> + rxd0-skew-ps = <0>; >> + rxd1-skew-ps = <0>; >> + rxd2-skew-ps = <0>; >> + rxd3-skew-ps = <0>; >> + txen-skew-ps = <0>; >> + txc-skew-ps = <2600>; >> + rxdv-skew-ps = <0>; >> + rxc-skew-ps = <2000>; > This all seems to be unrelated to the patch description and there isn't even > any binding documentatation (or is that in another patch ?). The documentation for all of these properties are located in micrel-ksz9021.txt. But that's a moot point since this entry should be removed from this patch anyways. Also, this patch was not sent to any of the DTS bindings maintainers. Dinh > Additionally these don't seem to be properties that apply to all cyclone5 based > boards, so they don't belong here. > >> + snps,max-mtu = <3800>; >> + altr,sysmgr-phy-mask = <0xC>; >> + status = "okay"; > ^^^^ > At least this is only valid for boards that use gmac1. > Put this in a boardspecific DT. > > Regards, > Steffen > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index eba0e5e..7db314e 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -30,6 +30,10 @@ Required properties: Optional properties: - mac-address: 6 bytes, mac address +- snps,max-mtu: Maximum MTU permitted. This parameter is useful since + different implementations of the Synopsys MAC may have + different FIFO sizes depending on the selections + made in Synopsys Core Consultant. Examples: @@ -40,5 +44,6 @@ Examples: interrupts = <24 23>; interrupt-names = "macirq", "eth_wake_irq"; mac-address = [000000000000]; /* Filled in by U-Boot */ + snps,max-mtu = <3800>; phy-mode = "gmii"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index a8716f6..b6b39dd 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -63,3 +63,22 @@ }; }; }; + +&gmac1 { + phy-mode = "rgmii"; + snps,phy-addr = <0xffffffff>; /* probe for phy addr */ + + rxd0-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txen-skew-ps = <0>; + txc-skew-ps = <2600>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <2000>; + snps,max-mtu = <3800>; + altr,sysmgr-phy-mask = <0xC>; + status = "okay"; +}; +
This change adds a parameter for the Synopsys 10/100/1000 stmmac Ethernet driver to configure the maximum MTU supported by the EMAC instance. Synopsys allows the FIFO sizes to be configured when the cores are built for a particular device, but do not provide a way for the driver to read information from the device about the maximum MTU size supported as limited by the device's FIFO size. This patch has been tested with changes being submitted seperately for the Synopsys 10/100/1000 stmmac driver. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> --- Documentation/devicetree/bindings/net/stmmac.txt | 5 +++++ arch/arm/boot/dts/socfpga_cyclone5.dtsi | 19 +++++++++++++++++++ 2 files changed, 24 insertions(+)