| Message ID | 1383911012-8905-1-git-send-email-denis@eukrea.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Fri, Nov 08, 2013 at 12:43:29PM +0100, Denis Carikli wrote: > From: Steffen Trumtrar <s.trumtrar@pengutronix.de> > > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: devicetree@vger.kernel.org > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Shawn Guo <shawn.guo@linaro.org> > Cc: linux-arm-kernel@lists.infradead.org > Cc: Eric Bénard <eric@eukrea.com> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Signed-off-by: Denis Carikli <denis@eukrea.com> > --- > ChangeLog v6->v7: > - Added Grant Likely in the Cc list. > - Added imx35-pingrp.h, and converted the rest of the patch to use it. > - lcdc pads were moved from the dtsi into another commit. > - A whitespace issue in the dtsi was removed. > > ChangeLog v5->v6: > - The dependency on pdata clocks has been removed, > and the dtsi adapted accordinly. > - Adaptation to the for-next branch of Shawn Guo at > git://git.linaro.org/people/shawnguo/linux-2.6.git for-next > - imx35-dt.c: very small whitespace cleanup. > - Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed. > - dtsi: The nodes were reordered alphabetically. > - dtsi: The aliases have been reordered alphabetically. > - Shawn Guo was added in the Cc. > --- > .../devicetree/bindings/clock/imx35-clock.txt | 115 ++++++ > arch/arm/boot/dts/imx35-pingrp.h | 100 ++++++ > arch/arm/boot/dts/imx35.dtsi | 368 ++++++++++++++++++++ > arch/arm/mach-imx/Kconfig | 9 + > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/clk-imx35.c | 18 + > arch/arm/mach-imx/common.h | 1 + > arch/arm/mach-imx/imx35-dt.c | 48 +++ Please separate arch/arm/boot/dts/ bits into another patch. > 8 files changed, 660 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt > create mode 100644 arch/arm/boot/dts/imx35-pingrp.h > create mode 100644 arch/arm/boot/dts/imx35.dtsi > create mode 100644 arch/arm/mach-imx/imx35-dt.c > > diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt > new file mode 100644 > index 0000000..9f9a60d > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt > @@ -0,0 +1,115 @@ > +* Clock bindings for Freescale i.MX35 > + > +Required properties: > +- compatible: Should be "fsl,imx35-ccm" > +- reg: Address and length of the register set > +- interrupts: Should contain CCM interrupt > +- #clock-cells: Should be <1> > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. The following is a full list of i.MX35 > +clocks and IDs. > + > + Clock ID > + --------------------------- > + ckih 0 > + mpll 1 > + ppll 2 > + mpll_075 3 > + arm 4 > + hsp 5 > + hsp_div 6 > + hsp_sel 7 > + ahb 8 > + ipg 9 > + arm_per_div 10 > + ahb_per_div 11 > + ipg_per 12 > + uart_sel 13 > + uart_div 14 > + esdhc_sel 15 > + esdhc1_div 16 > + esdhc2_div 17 > + esdhc3_div 18 > + spdif_sel 19 > + spdif_div_pre 20 > + spdif_div_post 21 > + ssi_sel 22 > + ssi1_div_pre 23 > + ssi1_div_post 24 > + ssi2_div_pre 25 > + ssi2_div_post 26 > + usb_sel 27 > + usb_div 28 > + nfc_div 29 > + asrc_gate 30 > + pata_gate 31 > + audmux_gate 32 > + can1_gate 33 > + can2_gate 34 > + cspi1_gate 35 > + cspi2_gate 36 > + ect_gate 37 > + edio_gate 38 > + emi_gate 39 > + epit1_gate 40 > + epit2_gate 41 > + esai_gate 42 > + esdhc1_gate 43 > + esdhc2_gate 44 > + esdhc3_gate 45 > + fec_gate 46 > + gpio1_gate 47 > + gpio2_gate 48 > + gpio3_gate 49 > + gpt_gate 50 > + i2c1_gate 51 > + i2c2_gate 52 > + i2c3_gate 53 > + iomuxc_gate 54 > + ipu_gate 55 > + kpp_gate 56 > + mlb_gate 57 > + mshc_gate 58 > + owire_gate 59 > + pwm_gate 60 > + rngc_gate 61 > + rtc_gate 62 > + rtic_gate 63 > + scc_gate 64 > + sdma_gate 65 > + spba_gate 66 > + spdif_gate 67 > + ssi1_gate 68 > + ssi2_gate 69 > + uart1_gate 70 > + uart2_gate 71 > + uart3_gate 72 > + usbotg_gate 73 > + wdog_gate 74 > + max_gate 75 > + admux_gate 76 > + csi_gate 77 > + csi_div 78 > + csi_sel 79 > + iim_gate 80 > + gpu2d_gate 81 > + clk_max 82 clk_max is not a clock signal and should be here. > + > +Examples: > + > +clks: ccm@53f80000 { > + compatible = "fsl,imx35-ccm"; > + reg = <0x53f80000 0x4000>; > + interrupts = <31>; > + #clock-cells = <1>; > +}; > + > +esdhc1: esdhc@53fb4000 { > + compatible = "fsl,imx35-esdhc"; > + reg = <0x53fb4000 0x4000>; > + interrupts = <7>; > + clocks = <&clks 9>, <&clks 8>, <&clks 43>; > + clock-names = "ipg", "ahb", "per"; > + status = "disabled"; Drop 'status' line from the example. > +}; > diff --git a/arch/arm/boot/dts/imx35-pingrp.h b/arch/arm/boot/dts/imx35-pingrp.h > new file mode 100644 > index 0000000..56fa422 > --- /dev/null > +++ b/arch/arm/boot/dts/imx35-pingrp.h > @@ -0,0 +1,100 @@ > +/* > + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > + > +#ifndef __DTS_IMX35_PINGRP_H > +#define __DTS_IMX35_PINGRP_H > + > +#define MX35_AUDMUX_PINGRP1 \ > + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 \ > + MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 \ > + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 \ > + MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000 > + > +#define MX35_CAN1_PINGRP1 \ > + MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x1c0 \ > + MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x1c0 > + > +#define MX35_CAN2_PINGRP1 \ > + MX35_PAD_TX5_RX0__CAN2_TXCAN 0x1c0 \ > + MX35_PAD_TX4_RX1__CAN2_RXCAN 0x1c0 > + > +#define MX35_ESDHC1_PINGRP1 \ > + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 \ > + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 \ > + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 \ > + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 \ > + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 \ > + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 > + > +#define MX35_FEC_PINGRP1 \ > + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 \ > + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 \ > + MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 \ > + MX35_PAD_FEC_COL__FEC_COL 0x80000000 \ > + MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 \ > + MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 \ > + MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 \ > + MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 \ > + MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 \ > + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 \ > + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 \ > + MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 \ > + MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 \ > + MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 \ > + MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 \ > + MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 \ > + MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 \ > + MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000 > + > +#define MX35_I2C1_PINGRP1 \ > + MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 \ > + MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 > + > +#define MX35_I2C3_PINGRP1 \ > + MX35_PAD_ATA_DATA12__I2C3_SCL 0x1c0 \ > + MX35_PAD_ATA_DATA13__I2C3_SDA 0x1c0 > + > +#define MX35_IPU_PINGRP1 \ > + MX35_PAD_LD0__IPU_DISPB_DAT_0 0x80000000 \ > + MX35_PAD_LD1__IPU_DISPB_DAT_1 0x80000000 \ > + MX35_PAD_LD2__IPU_DISPB_DAT_2 0x80000000 \ > + MX35_PAD_LD3__IPU_DISPB_DAT_3 0x80000000 \ > + MX35_PAD_LD4__IPU_DISPB_DAT_4 0x80000000 \ > + MX35_PAD_LD5__IPU_DISPB_DAT_5 0x80000000 \ > + MX35_PAD_LD6__IPU_DISPB_DAT_6 0x80000000 \ > + MX35_PAD_LD7__IPU_DISPB_DAT_7 0x80000000 \ > + MX35_PAD_LD8__IPU_DISPB_DAT_8 0x80000000 \ > + MX35_PAD_LD9__IPU_DISPB_DAT_9 0x80000000 \ > + MX35_PAD_LD10__IPU_DISPB_DAT_10 0x80000000 \ > + MX35_PAD_LD11__IPU_DISPB_DAT_11 0x80000000 \ > + MX35_PAD_LD12__IPU_DISPB_DAT_12 0x80000000 \ > + MX35_PAD_LD13__IPU_DISPB_DAT_13 0x80000000 \ > + MX35_PAD_LD14__IPU_DISPB_DAT_14 0x80000000 \ > + MX35_PAD_LD15__IPU_DISPB_DAT_15 0x80000000 \ > + MX35_PAD_LD16__IPU_DISPB_DAT_16 0x80000000 \ > + MX35_PAD_LD17__IPU_DISPB_DAT_17 0x80000000 \ > + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000 \ > + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000 \ > + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x80000000 \ > + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000 \ > + MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x80000000 > + > +#define MX35_UART1_PINGRP1 \ > + MX35_PAD_CTS1__UART1_CTS 0x80000000 \ > + MX35_PAD_RTS1__UART1_RTS 0x80000000 \ > + MX35_PAD_TXD1__UART1_TXD_MUX 0x80000000 \ > + MX35_PAD_RXD1__UART1_RXD_MUX 0x80000000 > + > +#define MX35_UART2_PINGRP1 \ > + MX35_PAD_RTS2__UART2_RTS 0x80000000 \ > + MX35_PAD_CTS2__UART2_CTS 0x80000000 \ > + MX35_PAD_RXD2__UART2_RXD_MUX 0x80000000 \ > + MX35_PAD_TXD2__UART2_TXD_MUX 0x80000000 > + > +#endif /* __DTS_IMX35_PINGRP_H */ > diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi > new file mode 100644 > index 0000000..1cf520a > --- /dev/null > +++ b/arch/arm/boot/dts/imx35.dtsi > @@ -0,0 +1,368 @@ > +/* > + * Copyright 2012 Steffen Trumtrar, Pengutronix > + * > + * based on imx27.dtsi > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation. > + */ > + > +#include "skeleton.dtsi" > +#include "imx35-pinfunc.h" > +#include "imx35-pingrp.h" > + > +/ { > + aliases { > + gpio0 = &gpio1; > + gpio1 = &gpio2; > + gpio2 = &gpio3; > + serial0 = &uart1; > + serial1 = &uart2; > + serial2 = &uart3; > + }; > + > + avic: avic-interrupt-controller@68000000 { > + compatible = "fsl,imx35-avic", "fsl,avic"; > + interrupt-controller; > + #interrupt-cells = <1>; > + reg = <0x68000000 0x10000000>; > + }; > + > + clocks { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ckil { > + compatible = "fsl,imx-ckil", "fixed-clock"; > + clock-frequency = <32768>; > + }; > + > + osc { > + compatible = "fsl,imx-osc", "fixed-clock"; > + clock-frequency = <24000000>; > + }; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + interrupt-parent = <&avic>; > + ranges; > + > + L2: l2-cache@30000000 { > + compatible = "arm,l210-cache"; > + reg = <0x30000000 0x1000>; > + cache-unified; > + cache-level = <2>; > + }; > + > + aips1: aips@43f00000 { > + compatible = "fsl,aips", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x43f00000 0x100000>; > + ranges; > + > + i2c1: i2c@43f80000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; > + reg = <0x43f80000 0x4000>; > + clocks = <&clks 51>; > + clock-names = "ipg_per"; > + interrupts = <10>; > + status = "disabled"; > + }; > + > + i2c3: i2c@43f84000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; > + reg = <0x43f84000 0x4000>; > + clocks = <&clks 53>; > + clock-names = "ipg_per"; > + interrupts = <3>; > + status = "disabled"; > + }; > + > + uart1: serial@43f90000 { > + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; > + reg = <0x43f90000 0x4000>; > + clocks = <&clks 9>, <&clks 70>; > + clock-names = "ipg", "per"; > + interrupts = <45>; > + status = "disabled"; > + }; > + > + uart2: serial@43f94000 { > + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; > + reg = <0x43f94000 0x4000>; > + clocks = <&clks 9>, <&clks 71>; > + clock-names = "ipg", "per"; > + interrupts = <32>; > + status = "disabled"; > + }; > + > + i2c2: i2c@43f98000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; > + reg = <0x43f98000 0x4000>; > + clocks = <&clks 52>; > + clock-names = "ipg_per"; > + interrupts = <4>; > + status = "disabled"; > + }; > + > + ssi1: ssi@43fa0000 { > + compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; > + reg = <0x43fa0000 0x4000>; > + interrupts = <11>; > + clocks = <&clks 68>; > + dmas = <&sdma 28 0 0>, > + <&sdma 29 0 0>; > + dma-names = "rx", "tx"; > + fsl,fifo-depth = <15>; > + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ This custom property is deprecated. Please drop it. > + status = "disabled"; > + }; > + > + iomuxc: iomuxc@43fac000 { > + compatible = "fsl,imx35-iomuxc"; > + reg = <0x43fac000 0x4000>; > + > + audmux { > + pinctrl_audmux_1: audmuxgrp-1 { > + fsl,pins = <MX35_AUDMUX_PINGRP1>; > + }; > + }; Do not add these pinctrl nodes here. Instead, add them in <board>.dts as needed. > + > + can1 { > + pinctrl_can1_1: can1grp-1 { > + fsl,pins = <MX35_CAN1_PINGRP1>; > + }; > + }; > + > + can2 { > + pinctrl_can2_1: can2grp-1 { > + fsl,pins = <MX35_CAN2_PINGRP1>; > + }; > + }; > + > + esdhc1 { > + pinctrl_esdhc1_1: esdhc1grp-1 { > + fsl,pins = <MX35_ESDHC1_PINGRP1>; > + }; > + }; > + > + fec { > + pinctrl_fec_1: fecgrp-1 { > + fsl,pins = <MX35_FEC_PINGRP1>; > + }; > + }; > + > + i2c1 { > + pinctrl_i2c1_1: i2c1grp-1 { > + fsl,pins = <MX35_I2C1_PINGRP1>; > + }; > + }; > + > + i2c3 { > + pinctrl_i2c3_1: i2c3grp-1 { > + fsl,pins = <MX35_I2C3_PINGRP1>; > + }; > + }; > + > + uart1 { > + pinctrl_uart1_1: uart1grp-1 { > + fsl,pins = <MX35_UART1_PINGRP1>; > + }; > + }; > + > + uart2 { > + pinctrl_uart2_1: uart2grp-1 { > + fsl,pins = <MX35_UART2_PINGRP1>; > + }; > + }; > + }; > + }; > + > + spba: spba-bus@50000000 { > + compatible = "fsl,spba-bus", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x50000000 0x100000>; > + ranges; > + > + uart3: serial@5000c000 { > + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; > + reg = <0x5000c000 0x4000>; > + clocks = <&clks 9>, <&clks 72>; > + clock-names = "ipg", "per"; > + interrupts = <18>; > + status = "disabled"; > + }; > + > + fec: fec@50038000 { > + compatible = "fsl,imx35-fec", "fsl,imx27-fec"; > + reg = <0x50038000 0x4000>; > + clocks = <&clks 46>, <&clks 8>; > + clock-names = "ipg", "ahb"; > + interrupts = <57>; > + status = "disabled"; > + }; > + }; > + > + aips2: aips@53f00000 { > + compatible = "fsl,aips", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x53f00000 0x100000>; > + ranges; > + > + clks: ccm@53f80000 { > + compatible = "fsl,imx35-ccm"; > + reg = <0x53f80000 0x4000>; > + interrupts = <31>; > + #clock-cells = <1>; > + }; > + > + gpio3: gpio@53fa4000 { > + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; > + reg = <0x53fa4000 0x4000>; > + interrupts = <56>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + esdhc1: esdhc@53fb4000 { > + compatible = "fsl,imx35-esdhc"; > + reg = <0x53fb4000 0x4000>; > + interrupts = <7>; > + clocks = <&clks 9>, <&clks 8>, <&clks 43>; > + clock-names = "ipg", "ahb", "per"; > + status = "disabled"; > + }; > + > + esdhc2: esdhc@53fb8000 { > + compatible = "fsl,imx35-esdhc"; > + reg = <0x53fb8000 0x4000>; > + interrupts = <8>; > + clocks = <&clks 9>, <&clks 8>, <&clks 44>; > + clock-names = "ipg", "ahb", "per"; > + status = "disabled"; > + }; > + > + esdhc3: esdhc@53fbc000 { > + compatible = "fsl,imx35-esdhc"; > + reg = <0x53fbc000 0x4000>; > + interrupts = <9>; > + clocks = <&clks 9>, <&clks 8>, <&clks 45>; > + clock-names = "ipg", "ahb", "per"; > + status = "disabled"; > + }; > + > + audmux: audmux@53fc4000 { > + compatible = "fsl,imx35-audmux", "fsl,imx31-audmux"; > + reg = <0x53fc4000 0x4000>; > + status = "disabled"; > + }; > + > + gpio1: gpio@53fcc000 { > + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; > + reg = <0x53fcc000 0x4000>; > + interrupts = <52>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpio2: gpio@53fd0000 { > + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; > + reg = <0x53fd0000 0x4000>; > + interrupts = <51>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sdma: sdma@53fd4000 { > + compatible = "fsl,imx35-sdma"; > + reg = <0x53fd4000 0x4000>; > + clocks = <&clks 9>, <&clks 65>; > + clock-names = "ipg", "ahb"; > + #dma-cells = <3>; > + interrupts = <34>; > + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin"; > + }; > + > + wdog: wdog@53fdc000 { > + compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; > + reg = <0x53fdc000 0x4000>; > + clocks = <&clks 74>; > + clock-names = ""; > + interrupts = <55>; > + }; > + > + can1: can@53fe4000 { > + compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; > + reg = <0x53fe4000 0x1000>; > + clocks = <&clks 33>; > + clock-names = "ipg"; > + interrupts = <43>; > + status = "disabled"; > + }; > + > + can2: can@53fe8000 { > + compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; > + reg = <0x53fe8000 0x1000>; > + clocks = <&clks 34>; > + clock-names = "ipg"; > + interrupts = <44>; > + status = "disabled"; > + }; > + }; > + > + emi@80000000 { /* External Memory Interface */ > + compatible = "fsl,emi", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x80000000 0x40000000>; > + ranges; > + > + nfc: nand@bb000000 { > + #address-cells = <1>; > + #size-cells = <1>; > + Drop this blank line. > + compatible = "fsl,imx35-nand", "fsl,imx25-nand"; > + reg = <0xbb000000 0x2000>; > + clocks = <&clks 29>; > + clock-names = ""; > + interrupts = <33>; > + status = "disabled"; > + }; > + > + weim: weim@b8002000 { > + #address-cells = <2>; > + #size-cells = <1>; > + compatible = "fsl,imx35-weim"; > + reg = <0xb8002000 0x1000>; > + ranges = < > + 0 0 0xa0000000 0x8000000 > + 1 0 0xa8000000 0x8000000 > + 2 0 0xb0000000 0x2000000 > + 3 0 0xb2000000 0x2000000 > + 4 0 0xb4000000 0x2000000 > + 5 0 0xb6000000 0x2000000 > + >; > + status = "disabled"; > + }; > + }; > + }; > +}; > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 2b90984..b1b3b6a 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -616,6 +616,15 @@ config MACH_IMX31_DT > > comment "MX35 platforms:" > > +config MACH_IMX35_DT > + bool "Support i.MX35 platforms from device tree" > + select SOC_IMX35 > + select PINCTRL > + select PINCTRL_IMX35 Sort these selects alphabetically. Shawn > + help > + Include support for Freescale i.MX35 based platforms > + using the device tree for discovery. > + > config MACH_PCM043 > bool "Support Phytec pcm043 (i.MX35) platforms" > select IMX_HAVE_PLATFORM_FLEXCAN > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 0db1697..befcaf5 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o > obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o > obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o > obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o > +obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o > > obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o > diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c > index 2193c83..cea861b 100644 > --- a/arch/arm/mach-imx/clk-imx35.c > +++ b/arch/arm/mach-imx/clk-imx35.c > @@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = { > static char hsp_div_532[] = { 4, 8, 3, 0 }; > static char hsp_div_400[] = { 3, 6, 3, 0 }; > > +static struct clk_onecell_data clk_data; > + > static const char *std_sel[] = {"ppll", "arm"}; > static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; > > @@ -286,3 +288,19 @@ int __init mx35_clocks_init(void) > > return 0; > } > + > +int __init mx35_clocks_init_dt(void) > +{ > + struct device_node *np; > + void __iomem *base; > + int irq; > + > + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm"); > + clk_data.clks = clk; > + clk_data.clk_num = ARRAY_SIZE(clk); > + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); > + > + mx35_clocks_init(); > + > + return 0; > +} > diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h > index 59c3b9b..6919b7d 100644 > --- a/arch/arm/mach-imx/common.h > +++ b/arch/arm/mach-imx/common.h > @@ -65,6 +65,7 @@ int mx35_clocks_init(void); > int mx51_clocks_init(unsigned long ckil, unsigned long osc, > unsigned long ckih1, unsigned long ckih2); > int mx25_clocks_init_dt(void); > +int mx35_clocks_init_dt(void); > int mx27_clocks_init_dt(void); > int mx31_clocks_init_dt(void); > struct platform_device *mxc_register_gpio(char *name, int id, > diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c > new file mode 100644 > index 0000000..e3def45 > --- /dev/null > +++ b/arch/arm/mach-imx/imx35-dt.c > @@ -0,0 +1,48 @@ > +/* > + * Copyright 2012 Steffen Trumtrar, Pengutronix > + * > + * based on imx27-dt.c > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation. > + */ > + > +#include <linux/irq.h> > +#include <linux/irqdomain.h> > +#include <linux/of_irq.h> > +#include <linux/of_platform.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/time.h> > +#include <asm/hardware/cache-l2x0.h> > +#include "common.h" > +#include "mx35.h" > + > +static void __init imx35_dt_init(void) > +{ > + mxc_arch_reset_init_dt(); > + > + of_platform_populate(NULL, of_default_bus_match_table, > + NULL, NULL); > +} > + > +static void __init imx35_timer_init(void) > +{ > + mx35_clocks_init_dt(); > +} > + > +static const char *imx35_dt_board_compat[] __initdata = { > + "fsl,imx35", > + NULL > +}; > + > +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") > + .map_io = mx35_map_io, > + .init_early = imx35_init_early, > + .init_irq = mx35_init_irq, > + .handle_irq = imx35_handle_irq, > + .init_time = imx35_timer_init, > + .init_machine = imx35_dt_init, > + .dt_compat = imx35_dt_board_compat, > + .restart = mxc_restart, > +MACHINE_END > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt new file mode 100644 index 0000000..9f9a60d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt @@ -0,0 +1,115 @@ +* Clock bindings for Freescale i.MX35 + +Required properties: +- compatible: Should be "fsl,imx35-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX35 +clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + clk_max 82 + +Examples: + +clks: ccm@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; +}; + +esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx35-pingrp.h b/arch/arm/boot/dts/imx35-pingrp.h new file mode 100644 index 0000000..56fa422 --- /dev/null +++ b/arch/arm/boot/dts/imx35-pingrp.h @@ -0,0 +1,100 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX35_PINGRP_H +#define __DTS_IMX35_PINGRP_H + +#define MX35_AUDMUX_PINGRP1 \ + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 \ + MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 \ + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 \ + MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000 + +#define MX35_CAN1_PINGRP1 \ + MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x1c0 \ + MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x1c0 + +#define MX35_CAN2_PINGRP1 \ + MX35_PAD_TX5_RX0__CAN2_TXCAN 0x1c0 \ + MX35_PAD_TX4_RX1__CAN2_RXCAN 0x1c0 + +#define MX35_ESDHC1_PINGRP1 \ + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 \ + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 \ + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 \ + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 \ + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 \ + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + +#define MX35_FEC_PINGRP1 \ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 \ + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 \ + MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 \ + MX35_PAD_FEC_COL__FEC_COL 0x80000000 \ + MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 \ + MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 \ + MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 \ + MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 \ + MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 \ + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 \ + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 \ + MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 \ + MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 \ + MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 \ + MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 \ + MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 \ + MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 \ + MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000 + +#define MX35_I2C1_PINGRP1 \ + MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 \ + MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 + +#define MX35_I2C3_PINGRP1 \ + MX35_PAD_ATA_DATA12__I2C3_SCL 0x1c0 \ + MX35_PAD_ATA_DATA13__I2C3_SDA 0x1c0 + +#define MX35_IPU_PINGRP1 \ + MX35_PAD_LD0__IPU_DISPB_DAT_0 0x80000000 \ + MX35_PAD_LD1__IPU_DISPB_DAT_1 0x80000000 \ + MX35_PAD_LD2__IPU_DISPB_DAT_2 0x80000000 \ + MX35_PAD_LD3__IPU_DISPB_DAT_3 0x80000000 \ + MX35_PAD_LD4__IPU_DISPB_DAT_4 0x80000000 \ + MX35_PAD_LD5__IPU_DISPB_DAT_5 0x80000000 \ + MX35_PAD_LD6__IPU_DISPB_DAT_6 0x80000000 \ + MX35_PAD_LD7__IPU_DISPB_DAT_7 0x80000000 \ + MX35_PAD_LD8__IPU_DISPB_DAT_8 0x80000000 \ + MX35_PAD_LD9__IPU_DISPB_DAT_9 0x80000000 \ + MX35_PAD_LD10__IPU_DISPB_DAT_10 0x80000000 \ + MX35_PAD_LD11__IPU_DISPB_DAT_11 0x80000000 \ + MX35_PAD_LD12__IPU_DISPB_DAT_12 0x80000000 \ + MX35_PAD_LD13__IPU_DISPB_DAT_13 0x80000000 \ + MX35_PAD_LD14__IPU_DISPB_DAT_14 0x80000000 \ + MX35_PAD_LD15__IPU_DISPB_DAT_15 0x80000000 \ + MX35_PAD_LD16__IPU_DISPB_DAT_16 0x80000000 \ + MX35_PAD_LD17__IPU_DISPB_DAT_17 0x80000000 \ + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000 \ + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000 \ + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x80000000 \ + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000 \ + MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x80000000 + +#define MX35_UART1_PINGRP1 \ + MX35_PAD_CTS1__UART1_CTS 0x80000000 \ + MX35_PAD_RTS1__UART1_RTS 0x80000000 \ + MX35_PAD_TXD1__UART1_TXD_MUX 0x80000000 \ + MX35_PAD_RXD1__UART1_RXD_MUX 0x80000000 + +#define MX35_UART2_PINGRP1 \ + MX35_PAD_RTS2__UART2_RTS 0x80000000 \ + MX35_PAD_CTS2__UART2_CTS 0x80000000 \ + MX35_PAD_RXD2__UART2_RXD_MUX 0x80000000 \ + MX35_PAD_TXD2__UART2_TXD_MUX 0x80000000 + +#endif /* __DTS_IMX35_PINGRP_H */ diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi new file mode 100644 index 0000000..1cf520a --- /dev/null +++ b/arch/arm/boot/dts/imx35.dtsi @@ -0,0 +1,368 @@ +/* + * Copyright 2012 Steffen Trumtrar, Pengutronix + * + * based on imx27.dtsi + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include "imx35-pinfunc.h" +#include "imx35-pingrp.h" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + avic: avic-interrupt-controller@68000000 { + compatible = "fsl,imx35-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x68000000 0x10000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + L2: l2-cache@30000000 { + compatible = "arm,l210-cache"; + reg = <0x30000000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + aips1: aips@43f00000 { + compatible = "fsl,aips", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + i2c1: i2c@43f80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; + reg = <0x43f80000 0x4000>; + clocks = <&clks 51>; + clock-names = "ipg_per"; + interrupts = <10>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; + reg = <0x43f84000 0x4000>; + clocks = <&clks 53>; + clock-names = "ipg_per"; + interrupts = <3>; + status = "disabled"; + }; + + uart1: serial@43f90000 { + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + clocks = <&clks 9>, <&clks 70>; + clock-names = "ipg", "per"; + interrupts = <45>; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + clocks = <&clks 9>, <&clks 71>; + clock-names = "ipg", "per"; + interrupts = <32>; + status = "disabled"; + }; + + i2c2: i2c@43f98000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; + reg = <0x43f98000 0x4000>; + clocks = <&clks 52>; + clock-names = "ipg_per"; + interrupts = <4>; + status = "disabled"; + }; + + ssi1: ssi@43fa0000 { + compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; + reg = <0x43fa0000 0x4000>; + interrupts = <11>; + clocks = <&clks 68>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + iomuxc: iomuxc@43fac000 { + compatible = "fsl,imx35-iomuxc"; + reg = <0x43fac000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = <MX35_AUDMUX_PINGRP1>; + }; + }; + + can1 { + pinctrl_can1_1: can1grp-1 { + fsl,pins = <MX35_CAN1_PINGRP1>; + }; + }; + + can2 { + pinctrl_can2_1: can2grp-1 { + fsl,pins = <MX35_CAN2_PINGRP1>; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = <MX35_ESDHC1_PINGRP1>; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = <MX35_FEC_PINGRP1>; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = <MX35_I2C1_PINGRP1>; + }; + }; + + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = <MX35_I2C3_PINGRP1>; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = <MX35_UART1_PINGRP1>; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = <MX35_UART2_PINGRP1>; + }; + }; + }; + }; + + spba: spba-bus@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x100000>; + ranges; + + uart3: serial@5000c000 { + compatible = "fsl,imx35-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + clocks = <&clks 9>, <&clks 72>; + clock-names = "ipg", "per"; + interrupts = <18>; + status = "disabled"; + }; + + fec: fec@50038000 { + compatible = "fsl,imx35-fec", "fsl,imx27-fec"; + reg = <0x50038000 0x4000>; + clocks = <&clks 46>, <&clks 8>; + clock-names = "ipg", "ahb"; + interrupts = <57>; + status = "disabled"; + }; + }; + + aips2: aips@53f00000 { + compatible = "fsl,aips", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + clks: ccm@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <56>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc2: esdhc@53fb8000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb8000 0x4000>; + interrupts = <8>; + clocks = <&clks 9>, <&clks 8>, <&clks 44>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc3: esdhc@53fbc000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fbc000 0x4000>; + interrupts = <9>; + clocks = <&clks 9>, <&clks 8>, <&clks 45>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + audmux: audmux@53fc4000 { + compatible = "fsl,imx35-audmux", "fsl,imx31-audmux"; + reg = <0x53fc4000 0x4000>; + status = "disabled"; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma: sdma@53fd4000 { + compatible = "fsl,imx35-sdma"; + reg = <0x53fd4000 0x4000>; + clocks = <&clks 9>, <&clks 65>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + interrupts = <34>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin"; + }; + + wdog: wdog@53fdc000 { + compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 74>; + clock-names = ""; + interrupts = <55>; + }; + + can1: can@53fe4000 { + compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fe4000 0x1000>; + clocks = <&clks 33>; + clock-names = "ipg"; + interrupts = <43>; + status = "disabled"; + }; + + can2: can@53fe8000 { + compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fe8000 0x1000>; + clocks = <&clks 34>; + clock-names = "ipg"; + interrupts = <44>; + status = "disabled"; + }; + }; + + emi@80000000 { /* External Memory Interface */ + compatible = "fsl,emi", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x40000000>; + ranges; + + nfc: nand@bb000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx35-nand", "fsl,imx25-nand"; + reg = <0xbb000000 0x2000>; + clocks = <&clks 29>; + clock-names = ""; + interrupts = <33>; + status = "disabled"; + }; + + weim: weim@b8002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx35-weim"; + reg = <0xb8002000 0x1000>; + ranges = < + 0 0 0xa0000000 0x8000000 + 1 0 0xa8000000 0x8000000 + 2 0 0xb0000000 0x2000000 + 3 0 0xb2000000 0x2000000 + 4 0 0xb4000000 0x2000000 + 5 0 0xb6000000 0x2000000 + >; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 2b90984..b1b3b6a 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -616,6 +616,15 @@ config MACH_IMX31_DT comment "MX35 platforms:" +config MACH_IMX35_DT + bool "Support i.MX35 platforms from device tree" + select SOC_IMX35 + select PINCTRL + select PINCTRL_IMX35 + help + Include support for Freescale i.MX35 based platforms + using the device tree for discovery. + config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select IMX_HAVE_PLATFORM_FLEXCAN diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 0db1697..befcaf5 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o +obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 2193c83..cea861b 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = { static char hsp_div_532[] = { 4, 8, 3, 0 }; static char hsp_div_400[] = { 3, 6, 3, 0 }; +static struct clk_onecell_data clk_data; + static const char *std_sel[] = {"ppll", "arm"}; static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; @@ -286,3 +288,19 @@ int __init mx35_clocks_init(void) return 0; } + +int __init mx35_clocks_init_dt(void) +{ + struct device_node *np; + void __iomem *base; + int irq; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + mx35_clocks_init(); + + return 0; +} diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 59c3b9b..6919b7d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -65,6 +65,7 @@ int mx35_clocks_init(void); int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); int mx25_clocks_init_dt(void); +int mx35_clocks_init_dt(void); int mx27_clocks_init_dt(void); int mx31_clocks_init_dt(void); struct platform_device *mxc_register_gpio(char *name, int id, diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c new file mode 100644 index 0000000..e3def45 --- /dev/null +++ b/arch/arm/mach-imx/imx35-dt.c @@ -0,0 +1,48 @@ +/* + * Copyright 2012 Steffen Trumtrar, Pengutronix + * + * based on imx27-dt.c + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/hardware/cache-l2x0.h> +#include "common.h" +#include "mx35.h" + +static void __init imx35_dt_init(void) +{ + mxc_arch_reset_init_dt(); + + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +} + +static void __init imx35_timer_init(void) +{ + mx35_clocks_init_dt(); +} + +static const char *imx35_dt_board_compat[] __initdata = { + "fsl,imx35", + NULL +}; + +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, + .init_time = imx35_timer_init, + .init_machine = imx35_dt_init, + .dt_compat = imx35_dt_board_compat, + .restart = mxc_restart, +MACHINE_END