Message ID | 20230929131936.29421-1-quic_nitirawa@quicinc.com |
---|---|
Headers | show |
Series | Add UFS host controller and Phy nodes for sc7280 | expand |
On 9/29/23 15:19, Nitin Rawat wrote: > Add UFS host controller and PHY nodes for sc7280 soc. > > Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> > --- Not sure if intentionally, but you didn't include my review tags from v3. [...] > + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_UFS_MEM_CFG 0>; include dt-bindings/interconnect/qcom,icc.h interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; Konrad
On 9/29/23 15:19, Nitin Rawat wrote: > Add UFS host controller and PHY nodes for sc7280 IDP board. > > Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> > Acked-by: Manivannan Sadhasivam <mani@kernel.org> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> I did not add these tags to this patch, drop them. Konrad
On 9/29/23 15:19, Nitin Rawat wrote: > This patch adds UFS host controller and Phy nodes for Qualcomm sc7280 SOC > and sc7280 Board. > > Changes from v3: > - Addresses Mani comment to include interconnect entry. These are not the only changes you've made. > > Changes from v2: > - Addressed Konrad comment to update binding qcom,ufs.yaml > - Addresses mani/konrad comment to align ufs clock entry in devicetree. > > Changes from v1: > - Addressed mani comment to separate soc and board change. > - Addressed mani comment to sort ufs node in ascending order. > > Nitin Rawat (4): > scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string > arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc > arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board > dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS > > Nitin Rawat (4): > scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string > arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc > arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board > dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS And this is bad. Please use the b4 tool [1], half of the issues will be solved.. Konrad [1] https://b4.docs.kernel.org/
On 9/29/2023 6:56 PM, Konrad Dybcio wrote: > > > On 9/29/23 15:19, Nitin Rawat wrote: >> Add UFS host controller and PHY nodes for sc7280 IDP board. >> >> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> >> Acked-by: Manivannan Sadhasivam <mani@kernel.org> >> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> > I did not add these tags to this patch, drop them. My Apologies.Actually Patch 2 and Patch3 review tag got swapped. Will update and send new patchset > > Konrad Thanks, Nitin
On Fri Sep 29, 2023 at 3:19 PM CEST, Nitin Rawat wrote: > Add UFS host controller and PHY nodes for sc7280 soc. Hi Nitin, I left some comments for v3 that maybe you missed before sending v4: https://lore.kernel.org/linux-arm-msm/CVVA1OVF4W9E.380D6QC1K9GD6@otso/ At least the clock part should definitely be fixed, ICE we can do later. Regards Luca > > Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 66 ++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 66f1eb83cca7..163e3df60966 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -3353,6 +3353,72 @@ > }; > }; > > + ufs_mem_hc: ufs@1d84000 { > + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; > + reg = <0x0 0x01d84000 0x0 0x3000>; > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufs_mem_phy>; > + phy-names = "ufsphy"; > + lanes-per-direction = <2>; > + #reset-cells = <1>; > + resets = <&gcc GCC_UFS_PHY_BCR>; > + reset-names = "rst"; > + > + power-domains = <&gcc GCC_UFS_PHY_GDSC>; > + required-opps = <&rpmhpd_opp_nom>; > + > + iommus = <&apps_smmu 0x80 0x0>; > + dma-coherent; > + > + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_UFS_MEM_CFG 0>; > + > + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, > + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, > + <&gcc GCC_UFS_PHY_AHB_CLK>, > + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; > + clock-names = "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk", > + "rx_lane1_sync_clk"; > + freq-table-hz = > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>, > + <0 0>; > + status = "disabled"; > + }; > + > + ufs_mem_phy: phy@1d87000 { > + compatible = "qcom,sc7280-qmp-ufs-phy"; > + reg = <0x0 0x01d87000 0x0 0xe00>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, > + <&gcc GCC_UFS_1_CLKREF_EN>; > + clock-names = "ref", "ref_aux", "qref"; > + > + resets = <&ufs_mem_hc 0>; > + reset-names = "ufsphy"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > usb_1_hsphy: phy@88e3000 { > compatible = "qcom,sc7280-usb-hs-phy", > "qcom,usb-snps-hs-7nm-phy"; > -- > 2.17.1