Message ID | 20230715091932.161507-1-davidwronek@gmail.com |
---|---|
Headers | show |
Series | Add initial support for SM7125 and Xiaomi SM7125 platform | expand |
On 15.07.2023 11:16, David Wronek wrote: > Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg > didn't update its configuration" error. > > Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > drivers/clk/qcom/gcc-sc7180.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c > index cef3c77564cf..49f36e1df4fa 100644 > --- a/drivers/clk/qcom/gcc-sc7180.c > +++ b/drivers/clk/qcom/gcc-sc7180.c > @@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = { > .name = "gcc_sdcc2_apps_clk_src", > .parent_data = gcc_parent_data_5, > .num_parents = ARRAY_SIZE(gcc_parent_data_5), > + .flags = CLK_OPS_PARENT_ENABLE, > .ops = &clk_rcg2_floor_ops, > }, > };
On 15.07.2023 11:16, David Wronek wrote: > Add support for the RTC which is the same as on other PMICs and add the > resin child node to the PM6150 PON device, both disabled by default. > > Signed-off-by: David Wronek <davidwronek@gmail.com> > Tested-by: Nikita Travkin <nikita@trvn.ru> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi > index 2e6afa296141..af51eb0646ba 100644 > --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi > @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey { > bias-pull-up; > linux,code = <KEY_POWER>; > }; > + > + pm6150_resin: resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + status = "disabled"; > + }; > }; > > pm6150_temp: temp-alarm@2400 { > @@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 { > status = "disabled"; > }; > > + pm6150_rtc: rtc@6000 { > + compatible = "qcom,pm8941-rtc"; > + reg = <0x6000>, <0x6100>; > + reg-names = "rtc", "alarm"; > + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; > + status = "disabled"; > + }; > + > pm6150_gpios: gpio@c000 { > compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; > reg = <0xc000>;
On 15.07.2023 11:16, David Wronek wrote: > The Snapdragon 720G (sm7125) is software-wise very similar to the > Snapdragon 7c with minor differences in clock speeds and as added here, > it uses the Kryo 465 instead of Kryo 468. > > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi > new file mode 100644 > index 000000000000..12dd72859a43 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + */ > + > +#include "sc7180.dtsi" > + > +/* SM7125 uses Kryo 465 instead of Kryo 468 */ > +&CPU0 { compatible = "qcom,kryo465"; }; > +&CPU1 { compatible = "qcom,kryo465"; }; > +&CPU2 { compatible = "qcom,kryo465"; }; > +&CPU3 { compatible = "qcom,kryo465"; }; > +&CPU4 { compatible = "qcom,kryo465"; }; > +&CPU5 { compatible = "qcom,kryo465"; }; > +&CPU6 { compatible = "qcom,kryo465"; }; > +&CPU7 { compatible = "qcom,kryo465"; };
On 15.07.2023 11:16, David Wronek wrote: > There are 6 Xiaomi smartphones with the SM7125 SoC: > > - POCO M2 Pro (gram) > - Redmi Note 9S (curtana) > - Redmi Note 9 Pro (Global, joyeuse) > - Redmi Note 9 Pro (India, curtana) > - Redmi Note 9 Pro Max (excalibur) > - Redmi Note 10 Lite (curtana) > > These devices share a common board design (a.k.a miatoll) with only a > few differences. Add support for the common board, as well as support > for the global Redmi Note 9 Pro. > > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- The copyright headers seem weird, but other than that: Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + > .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ > 3 files changed, 440 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 337abc4ceb17..7ef9e7d43904 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > new file mode 100644 > index 000000000000..2b3d1ed1bcae > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "sm7125-xiaomi-miatoll.dtsi" > + > +/ { > + model = "Xiaomi Redmi Note 9 Pro (Global)"; > + compatible = "xiaomi,joyeuse", "qcom,sm7125"; > + > + /* required for bootloader to select correct board */ > + qcom,board-id = <0x50022 1>; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > new file mode 100644 > index 000000000000..80073140e475 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > @@ -0,0 +1,423 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/arm/qcom,ids.h> > +#include <dt-bindings/firmware/qcom,scm.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm7125.dtsi" > +#include "pm6150.dtsi" > +#include "pm6150l.dtsi" > + > +/delete-node/ &ipa_fw_mem; > +/delete-node/ &rmtfs_mem; > + > +/ { > + chassis-type = "handset"; > + > + qcom,msm-id = <QCOM_ID_SM7125 0>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer@9c000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; > + width = <1080>; > + height = <2400>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > + }; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + > + key-vol-down { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + reserved-memory { > + mpss_mem: memory@86000000 { > + reg = <0x0 0x86000000 0x0 0x8400000>; > + no-map; > + }; > + > + venus_mem: memory@8ee00000 { > + reg = <0x0 0x8ee00000 0x0 0x500000>; > + no-map; > + }; > + > + cdsp_mem: memory@8f300000 { > + reg = <0x0 0x8f300000 0x0 0x1e00000>; > + no-map; > + }; > + > + adsp_mem: memory@91100000 { > + reg = <0x0 0x91100000 0x0 0x2800000>; > + no-map; > + }; > + > + wlan_mem: memory@93900000 { > + reg = <0x0 0x93900000 0x0 0x200000>; > + no-map; > + }; > + > + ipa_fw_mem: memory@93b00000 { > + reg = <0x0 0x93b00000 0x0 0x10000>; > + no-map; > + }; > + > + gpu_mem: memory@93b15000 { > + reg = <0x0 0x93b15000 0x0 0x2000>; > + no-map; > + }; > + > + cont_splash_mem: memory@9c000000 { > + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; > + no-map; > + }; > + > + pstore_mem: ramoops@9d800000 { > + compatible = "ramoops"; > + reg = <0x0 0x9d800000 0x0 0x400000>; > + record-size = <0x80000>; > + pmsg-size = <0x200000>; > + console-size = <0x100000>; > + }; > + > + rmtfs_mem: memory@fa601000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0xfa601000 0x0 0x200000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; > + }; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm6150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vreg_s1a_1p1: smps1 { > + regulator-min-microvolt = <1128000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s4a_1p0: smps4 { > + regulator-min-microvolt = <824000>; > + regulator-max-microvolt = <1120000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-min-microvolt = <1744000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + vreg_l1a_1p2: ldo1 { > + regulator-min-microvolt = <1178000>; > + regulator-max-microvolt = <1256000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2a_1p0: ldo2 { > + regulator-min-microvolt = <944000>; > + regulator-max-microvolt = <1056000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3a_1p0: ldo3 { > + regulator-min-microvolt = <968000>; > + regulator-max-microvolt = <1064000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4a_0p88: ldo4 { > + regulator-min-microvolt = <824000>; > + regulator-max-microvolt = <928000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5a_2p7: ldo5 { > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6a_0p6: ldo6 { > + regulator-min-microvolt = <568000>; > + regulator-max-microvolt = <648000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9a_0p664: ldo9 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10a_1p8: ldo10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1832000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11a_1p8: ldo11 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1952000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a_1p8: ldo13 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-min-microvolt = <1728000>; > + regulator-max-microvolt = <1832000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16a_2p7: ldo16 { > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17a_3p1: ldo17 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18a_3p0: ldo18 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l19a_3p0: ldo19 { > + regulator-min-microvolt = <2696000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm6150l-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vreg_s8c_1p3: smps8 { > + regulator-min-microvolt = <1120000>; > + regulator-max-microvolt = <1408000>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-min-microvolt = <1616000>; > + regulator-max-microvolt = <1984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_1p3: ldo2 { > + regulator-min-microvolt = <1168000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_1p23: ldo3 { > + regulator-min-microvolt = <1144000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4c_1p8: ldo4 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5c_1p8: ldo5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_3p0: ldo6 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c_3p0: ldo7 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p9: ldo9 { > + regulator-min-microvolt = <2952000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p3: ldo11 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + }; > +}; > + > +&dispcc { > + /* HACK: disable until a panel driver is ready to retain simplefb */ > + status = "disabled"; > +}; > + > +&pm6150_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > +}; > + > +&pm6150_rtc { > + status = "okay"; > +}; > + > +&sdhc_2 { > + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&sdc2_on>; > + pinctrl-1 = <&sdc2_off>; > + vmmc-supply = <&vreg_l9c_2p9>; > + vqmmc-supply = <&vreg_l6c_3p0>; > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; > + > + sdc2_on: sdc2-on-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + sd-cd-pins { > + pins = "gpio69"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > + > + sdc2_off: sdc2-off-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <2>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + sd-cd-pins { > + pins = "gpio69"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > +}; > + > +&usb_1 { > + qcom,select-utmi-as-pipe-clk; > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > + maximum-speed = "high-speed"; > + status = "okay"; > +}; > + > +&usb_1_hsphy { > + vdd-supply = <&vreg_l4a_0p88>; > + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; > + vdda-pll-supply = <&vreg_l11a_1p8>; > + status = "okay"; > +}; > + > +&usb_1_qmpphy { > + vdda-phy-supply = <&vreg_l4a_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p23>; > + status = "okay"; > +};
This series introduces support for the Qualcomm SM7125 SoC and the Xiaomi SM7125 platform. Signed-off-by: David Wronek <davidwronek@gmail.com> --- Changes in v2: - Allow qcom,board-id and qcom,msm-id properties - Use QCOM_SCM_VMID_MSS_MSA definition - Change initial regulator modes from LPM to HPM - Move status to the bottom of nodes - Fix up PM6150 interrupts - Move clk patch to beginning of series - Fix up copyright - Take ownership of all commits with permission - Link to v1: https://lore.kernel.org/all/20230704163848.169853-2-davidwronek@gmail.com/ Changes in v3: - Disable pm6150 rtc by default - Fix wrong pm8150l PMIC in joyeuse dts - Link to v2: https://lore.kernel.org/all/20230706124339.134272-1-davidwronek@gmail.com/ --- David Wronek (7): clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src dt-bindings: arm: qcom,ids: Add SoC ID for SM7125 dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board soc: qcom: socinfo: Add SoC ID for SM7125 arm64: dts: qcom: pm6150: Add resin and rtc nodes arm64: dts: qcom: Add SM7125 device tree arm64: dts: qcom: Add support for the Xiaomi SM7125 platform .../devicetree/bindings/arm/qcom.yaml | 7 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 + .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 + drivers/clk/qcom/gcc-sc7180.c | 1 + drivers/soc/qcom/socinfo.c | 1 + include/dt-bindings/arm/qcom,ids.h | 1 + 9 files changed, 482 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi