From patchwork Sun Sep 25 17:52:04 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dario Binacchi X-Patchwork-Id: 1682242 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=amarulasolutions.com header.i=@amarulasolutions.com header.a=rsa-sha256 header.s=google header.b=Pmmlj3lT; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4MbD495ZJrz1yq1 for ; Mon, 26 Sep 2022 03:52:25 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230385AbiIYRwU (ORCPT ); Sun, 25 Sep 2022 13:52:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46694 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232350AbiIYRwT (ORCPT ); Sun, 25 Sep 2022 13:52:19 -0400 Received: from mail-ed1-x52a.google.com (mail-ed1-x52a.google.com [IPv6:2a00:1450:4864:20::52a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B5A281F2F5 for ; Sun, 25 Sep 2022 10:52:17 -0700 (PDT) Received: by mail-ed1-x52a.google.com with SMTP id z13so6223990edb.13 for ; Sun, 25 Sep 2022 10:52:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date; bh=tKIChjssk9qrfQZXpSX5zD6aIatsPePkOhcMo1qow4g=; b=Pmmlj3lT76utLBHuu2eVq7J7WxDwU4qJHC1HgjjZdWljTsQBb6ewQh2J/C7SqUXgCN u69G0QtqpddFf5wBa2APijOHMNSj0skQ4sW0w52RaaHHnFp+mhJn6TCbfa+Gez9Fwybw jdvdfp+X2Rgj1Cse7c1c1F8SmwEz/DYSg2vvQ= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date; bh=tKIChjssk9qrfQZXpSX5zD6aIatsPePkOhcMo1qow4g=; b=brZqCRkiPfOCihy9Ecj+G6PkcfFdR6hITxDX8esNaB4EecI3/A8yIiZWwh+4e83Pl7 2iQtJBaXAm6naEtJhUA+dYlR5BfVJKxasq+EIknOvXyhoyUdGldP8WzKj+cfuG6VvzXm Evna425/7iImpXssjz3IKZ+0TTRuXWa1c1Wlj2cF6Y7m9H9xSbZ5OdECt4oKWVSllLuo n7M51fFeb4JebfqGmbk43CIN0t79Kku7YfJnnXl3Dr332gdZT0QvGQynHvIv3a7/KvwV 2zE2TfKQEF3fITxF9OS7WZWpWFXq08+XOF8LaIGwl3hiTirbAyZIH8ZgGTc+u/H0o61N eq0Q== X-Gm-Message-State: ACrzQf139361ZOKlKWVMOWL90tKi/i8nRwr3Ub2MUz+kbANj6A0nNzA4 /rZRbQ5jW51haELnkMoFAtE+xA== X-Google-Smtp-Source: AMsMyM4Kx2cZYORTXn6rNexr6JP9tU03J3wrYfA9VDWomLSa/cKrdR5EXdtuhXTPkZr5BHVRwa/nEg== X-Received: by 2002:a05:6402:2802:b0:43a:9098:55a0 with SMTP id h2-20020a056402280200b0043a909855a0mr18339228ede.179.1664128336243; Sun, 25 Sep 2022 10:52:16 -0700 (PDT) Received: from dario-ThinkPad-T14s-Gen-2i.homenet.telecomitalia.it (host-95-232-92-192.retail.telecomitalia.it. [95.232.92.192]) by smtp.gmail.com with ESMTPSA id f23-20020a056402161700b0045703d699b9sm3252594edv.78.2022.09.25.10.52.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 25 Sep 2022 10:52:15 -0700 (PDT) From: Dario Binacchi To: linux-kernel@vger.kernel.org Cc: Rob Herring , Krzysztof Kozlowski , Marc Kleine-Budde , Vincent Mailhol , michael@amarulasolutions.com, Amarula patchwork , Alexandre Torgue , Dario Binacchi , Christophe Roullier , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Krzysztof Kozlowski , Lee Jones , Mathieu Poirier , Maxime Coquelin , Paolo Abeni , Patrice Chotard , Rob Herring , Wolfgang Grandegger , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-can@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org Subject: [RFC PATCH v4 0/5] can: bxcan: add support for ST bxCAN controller Date: Sun, 25 Sep 2022 19:52:04 +0200 Message-Id: <20220925175209.1528960-1-dario.binacchi@amarulasolutions.com> X-Mailer: git-send-email 2.32.0 MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The series adds support for the basic extended CAN controller (bxCAN) found in many low- to middle-end STM32 SoCs. The driver design (one core module and one driver module) was inspired by other ST drivers (e. g. drivers/iio/adc/stm32-adc.c, drivers/iio/adc/stm32-adc-core.c) where device instances share resources. The shared resources functions are implemented in the core module, the device driver in a separate module. The driver has been tested on the stm32f469i-discovery board with a kernel version 5.19.0-rc2 in loopback + silent mode: ip link set can0 type can bitrate 125000 loopback on listen-only on ip link set up can0 candump can0 -L & cansend can0 300#AC.AB.AD.AE.75.49.AD.D1 For uboot and kernel compilation, as well as for rootfs creation I used buildroot: make stm32f469_disco_sd_defconfig make but I had to patch can-utils and busybox as can-utils and iproute are not compiled for MMU-less microcotrollers. In the case of can-utils, replacing the calls to fork() with vfork(), I was able to compile the package with working candump and cansend applications, while in the case of iproute, I ran into more than one problem and finally I decided to extend busybox's ip link command for CAN-type devices. I'm still wondering if it was really necessary, but this way I was able to test the driver. Changes in v4: - Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes (compatible "st,stm32f4-bxcan") are no longer children of a parent node with compatible "st,stm32f4-bxcan-core". - Add the "st,gcan" property (global can memory) to can nodes which references a "syscon" node containing the shared clock and memory addresses. - Replace the node can@40006400 (compatible "st,stm32f4-bxcan-core") with the gcan@40006600 node ("sysnode" compatible). The gcan node contains clocks and memory addresses shared by the two can nodes of which it's no longer the parent. - Add to can nodes the "st,gcan" property (global can memory) which references the gcan@40006600 node ("sysnode compatibble). - Add "dt-bindings: arm: stm32: add compatible for syscon gcan node" patch. - Drop the core driver. Thus bxcan-drv.c has been renamed to bxcan.c and moved to the drivers/net/can folder. The drivers/net/can/bxcan directory has therefore been removed. - Use the regmap_*() functions to access the shared memory registers. - Use spinlock to protect bxcan_rmw(). - Use 1 space, instead of tabs, in the macros definition. - Drop clock ref-counting. - Drop unused code. - Drop the _SHIFT macros and use FIELD_GET()/FIELD_PREP() directly. - Add BXCAN_ prefix to lec error codes. - Add the macro BXCAN_RX_MB_NUM. - Enable time triggered mode and use can_rx_offload(). - Use readx_poll_timeout() in function with timeouts. - Loop from tail to head in bxcan_tx_isr(). - Check bits of tsr register instead of pkts variable in bxcan_tx_isr(). - Don't return from bxcan_handle_state_change() if skb/cf are NULL. - Enable/disable the generation of the bus error interrupt depending on can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING. - Don't return from bxcan_handle_bus_err() if skb is NULL. - Drop statistics updating from bxcan_handle_bus_err(). - Add an empty line in front of 'return IRQ_HANDLED;' - Rename bxcan_start() to bxcan_chip_start(). - Rename bxcan_stop() to bxcan_chip_stop(). - Disable all IRQs in bxcan_chip_stop(). - Rename bxcan_close() to bxcan_ndo_stop(). - Use writel instead of bxcan_rmw() to update the dlc register. Changes in v3: - Remove 'Dario Binacchi ' SOB. - Add description to the parent of the two child nodes. - Move "patterProperties:" after "properties: in top level before "required". - Add "clocks" to the "required:" list of the child nodes. - Remove 'Dario Binacchi ' SOB. - Add "clocks" to can@0 node. - Remove 'Dario Binacchi ' SOB. - Remove a blank line. - Remove 'Dario Binacchi ' SOB. - Fix the documentation file path in the MAINTAINERS entry. - Do not increment the "stats->rx_bytes" if the frame is remote. - Remove pr_debug() call from bxcan_rmw(). Changes in v2: - Change the file name into 'st,stm32-bxcan-core.yaml'. - Rename compatibles: - st,stm32-bxcan-core -> st,stm32f4-bxcan-core - st,stm32-bxcan -> st,stm32f4-bxcan - Rename master property to st,can-master. - Remove the status property from the example. - Put the node child properties as required. - Remove a blank line. - Fix sparse errors. - Create a MAINTAINERS entry. - Remove the print of the registers address. - Remove the volatile keyword from bxcan_rmw(). - Use tx ring algorithm to manage tx mailboxes. - Use can_{get|put}_echo_skb(). - Update DT properties. Dario Binacchi (5): dt-bindings: arm: stm32: add compatible for syscon gcan node dt-bindings: net: can: add STM32 bxcan DT bindings ARM: dts: stm32: add CAN support on stm32f429 ARM: dts: stm32: add pin map for CAN controller on stm32f4 can: bxcan: add support for ST bxCAN controller .../bindings/arm/stm32/st,stm32-syscon.yaml | 2 + .../bindings/net/can/st,stm32-bxcan.yaml | 83 ++ MAINTAINERS | 7 + arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 30 + arch/arm/boot/dts/stm32f429.dtsi | 29 + drivers/net/can/Kconfig | 12 + drivers/net/can/Makefile | 1 + drivers/net/can/bxcan.c | 1110 +++++++++++++++++ 8 files changed, 1274 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml create mode 100644 drivers/net/can/bxcan.c