Message ID | 20210929081333.26454-1-sinthu.raja@ti.com |
---|---|
Headers | show |
Series | arm64: dts: ti: Add support for J721E starter kit | expand |
On Wed, 29 Sep 2021 13:43:29 +0530, Sinthu Raja wrote: > From: Sinthu Raja <sinthu.raja@ti.com> > > Hi, > This series of patches add support for J721e Starter kit(SK)[1]. J721e SK > is a low cost, small form factor board designed for TI’s J721E SoC. > > Changes in V3: > - Introduced IPC sub mailbox nodes patch. > - Introduced DDR carveout memory nodes patch. > - Updated board name to starter kit > - Fixed DTS binding errors. > - Updated commit message, $subject which includes adding board URL, > > [...] Hi Sinthu Raja, I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/4] dt-bindings: arm: ti: Add compatible for J721E SK commit: 2927c9a56e36788859606f445a5290bf21c9ab53 [2/4] arm64: dts: ti: Add support for J721E SK commit: 1bfda92a3a36c4dbd2b15a7f6660b673f4a2e475 [3/4] arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes commit: e910e5b6763d8b895ca1bba918a39d20e3361358 [4/4] arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes commit: f46d16cf5b43b66de030f0e3b2f20d24ba95f369 Side note: - There are still cleanups that are in works (tsadc, cdns, etc..) - since these are already present and active cleanup is going on, letting it past, but if I do get a push back from upstream maintainers, I'd have to pull the series back. - I had applied the yaml cleanup for j721e, so I had to apply based on the offset. Let me know if the changes are troublesome, else no action is needed - I have built and run it through the usual guantlet as best as I can. All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
From: Sinthu Raja <sinthu.raja@ti.com> Hi, This series of patches add support for J721e Starter kit(SK)[1]. J721e SK is a low cost, small form factor board designed for TI’s J721E SoC. Changes in V3: - Introduced IPC sub mailbox nodes patch. - Introduced DDR carveout memory nodes patch. - Updated board name to starter kit - Fixed DTS binding errors. - Updated commit message, $subject which includes adding board URL, V2: https://lore.kernel.org/all/20210602182237.12632-1-sinthu.raja@ti.com/ V1: https://lore.kernel.org/all/20210602182237.12632-1-sinthu.raja@ti.com/ [1]https://www.ti.com/tool/SK-TDA4VM Sinthu Raja (4): dt-bindings: arm: ti: Add compatible for J721E SK arm64: dts: ti: Add support for J721E SK arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes .../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 1 + arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1002 +++++++++++++++++ 3 files changed, 1004 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-sk.dts