mbox series

[v3,0/2] Add devicetree support for SDX55 Modem and MTP

Message ID 20201126083138.47047-1-manivannan.sadhasivam@linaro.org
Headers show
Series Add devicetree support for SDX55 Modem and MTP | expand

Message

Manivannan Sadhasivam Nov. 26, 2020, 8:31 a.m. UTC 
Hello,

This series adds devicetree support for Qualcomm SDX55 platform and MTP
board. This series functionally depends on Clock support series [1]
which is under review.

With the current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Mani

[1] https://lore.kernel.org/linux-arm-msm/20201119072714.14460-1-manivannan.sadhasivam@linaro.org/

Changes in v3:

* Removed pll_test clock and used numbers instead of enums for GCC clock
  so that this series can be applied without gcc patches.

Changes in v2:

* Incorporated review comments from Bjorn. Mostly minor changes.

Manivannan Sadhasivam (1):
  ARM: dts: qcom: Add SDX55 platform and MTP board support

Vinod Koul (1):
  dt-bindings: arm: qcom: Document SDX55 platform and boards

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/qcom-sdx55-mtp.dts          |  27 +++
 arch/arm/boot/dts/qcom-sdx55.dtsi             | 193 ++++++++++++++++++
 4 files changed, 228 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx55.dtsi