| Message ID | 20200731081836.3048-1-laurentiu.palcu@oss.nxp.com |
|---|---|
| Headers | show |
| Series | Add support for iMX8MQ Display Controller Subsystem | expand |
Hi, On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > Hi, > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > includes only graphics plane support (no video planes), no HDR10 capabilities, > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > Support for the rest of the features will be added incrementally, in subsequent > patches. > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > Thanks, > Laurentiu > > Changes in v9: > * Fixed a compilation issue found by Guido in his setup: 'select > VIDEOMODE_HELPERS' was missing from Kconfig; > * Use imx8mq-clock.h in the bindings file so one can understand what > those clock values mean; > * no other changes done. Couldn't address the hang Guido reported as > it's not happening in my setup. However, in my tree, there are some > extra NWL and ADV patches applied on top of upstream ones... Also, > removing them and testing only with upstream, even if there's no > image out, does not produce a hang... :/ I don't think this should hold up merging. Cheers, -- Guido > > Changes in v8: > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > out. SRC is not used in DCSS driver; > * Nothing else changed; > > Changes in v7: > * Added a patch to initialize the connector using the drm_bridge_connector > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > patches for ADV and NWL were needed, from our downstream tree, which > will be upstreamed soon by their author; > * Rest of the patches are untouched; > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > Changes in v6: > * Addressed Rob's comment and added "additionalProperties: false" at > the end of the bindings' properties. However, this change surfaced > an issue with the assigned-clock* properties not being documented in > the properties section. Added the descriptions and the bindings patch > will need another review; > * Added an entry for DCSS driver in the MAINTAINERS file; > * Removed the component framework patch altogether; > > Changes in v5: > * Rebased to latest; > * Took out component framework support and made it a separate patch so > that people can still test with HDP driver, which makes use of it. > But the idea is to get rid of it once HDP driver's next versions > will remove component framework as well; > * Slight improvement to modesetting: avoid cutting off the pixel clock > if the new mode and the old one are equal. Also, in this case, is > not necessary to wait for DTG to shut off. This would allow to switch > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > from DCSS point of view); > * Do not fire off CTXLD when going to suspend, unless it still has > entries that need to be committed to DCSS; > * Addressed Rob's comments on bindings; > > Changes in v4: > * Addressed Lucas and Philipp's comments: > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > * Removed usage of devm_ functions since I'm already doing all the > clean-up in the submodules_deinit(); > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > * Removed en_completion variable from dcss_crtc since this was > introduced mainly to avoid vblank timeout warnings which were fixed > by arming the vblank event in flush() instead of begin(); > * Removed clks_on and irq_enabled flags since all the calls to > enabling/disabling clocks and interrupts were balanced; > * Removed the custom atomic_commit callback and used the DRM core > helper and, in the process, got rid of a workqueue that wasn't > necessary anymore; > * Fixed some minor DT binding issues flagged by Philipp; > * Some other minor changes suggested by Lucas; > * Removed YUV formats from the supported formats as these cannot work > without the HDR10 module CSCs and LUTs. Will add them back when I > will add support for video planes; > > Changes in v3: > * rebased to latest linux-next and made it compile as drmP.h was > removed; > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > * fixed a a spurious hang reported by Lukas Hartmann and encountered > by me several times; > * mask DPR and DTG interrupts by default, as they may come enabled from > U-boot; > > Changes in v2: > * Removed '0x' in node's unit-address both in DT and yaml; > * Made the address region size lowercase, to be consistent; > * Removed some left-over references to P010; > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > issues reported by kbuild for other architectures; > > > Laurentiu Palcu (5): > drm/imx: compile imx directory by default > drm/imx: Add initial support for DCSS on iMX8MQ > drm/imx/dcss: use drm_bridge_connector API > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > dt-bindings: display: imx: add bindings for DCSS > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > MAINTAINERS | 8 + > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/imx/Kconfig | 2 + > drivers/gpu/drm/imx/Makefile | 1 + > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > drivers/gpu/drm/imx/dcss/Makefile | 6 + > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > 20 files changed, 4112 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > -- > 2.23.0 >
Hi Lucas, I was wondering about the plans to merge this series. Since not many people can test it properly due to lack of DCSS support in the upstream NWL driver (which I heard it's coming soon) and a completely nonexistent HDP driver, are we going to take a leap of faith and merge it as is? Or should we wait? As to who is going to do the actual merge, I know we had a brief discussion about it some time ago and I was supposed to apply for drm-misc rights, however it feels a little awkward to merge my own code... :) Though, I might not even qualify for drm-misc rights anyway, considering I haven't been very active in this area... :/ On that note, I will probably need help with the merging, provided it's still happenning. Will you be able to help me out with this? Thanks, laurentiu On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > Hi, > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > includes only graphics plane support (no video planes), no HDR10 capabilities, > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > Support for the rest of the features will be added incrementally, in subsequent > patches. > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > Thanks, > Laurentiu > > Changes in v9: > * Fixed a compilation issue found by Guido in his setup: 'select > VIDEOMODE_HELPERS' was missing from Kconfig; > * Use imx8mq-clock.h in the bindings file so one can understand what > those clock values mean; > * no other changes done. Couldn't address the hang Guido reported as > it's not happening in my setup. However, in my tree, there are some > extra NWL and ADV patches applied on top of upstream ones... Also, > removing them and testing only with upstream, even if there's no > image out, does not produce a hang... :/ > > Changes in v8: > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > out. SRC is not used in DCSS driver; > * Nothing else changed; > > Changes in v7: > * Added a patch to initialize the connector using the drm_bridge_connector > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > patches for ADV and NWL were needed, from our downstream tree, which > will be upstreamed soon by their author; > * Rest of the patches are untouched; > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > Changes in v6: > * Addressed Rob's comment and added "additionalProperties: false" at > the end of the bindings' properties. However, this change surfaced > an issue with the assigned-clock* properties not being documented in > the properties section. Added the descriptions and the bindings patch > will need another review; > * Added an entry for DCSS driver in the MAINTAINERS file; > * Removed the component framework patch altogether; > > Changes in v5: > * Rebased to latest; > * Took out component framework support and made it a separate patch so > that people can still test with HDP driver, which makes use of it. > But the idea is to get rid of it once HDP driver's next versions > will remove component framework as well; > * Slight improvement to modesetting: avoid cutting off the pixel clock > if the new mode and the old one are equal. Also, in this case, is > not necessary to wait for DTG to shut off. This would allow to switch > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > from DCSS point of view); > * Do not fire off CTXLD when going to suspend, unless it still has > entries that need to be committed to DCSS; > * Addressed Rob's comments on bindings; > > Changes in v4: > * Addressed Lucas and Philipp's comments: > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > * Removed usage of devm_ functions since I'm already doing all the > clean-up in the submodules_deinit(); > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > * Removed en_completion variable from dcss_crtc since this was > introduced mainly to avoid vblank timeout warnings which were fixed > by arming the vblank event in flush() instead of begin(); > * Removed clks_on and irq_enabled flags since all the calls to > enabling/disabling clocks and interrupts were balanced; > * Removed the custom atomic_commit callback and used the DRM core > helper and, in the process, got rid of a workqueue that wasn't > necessary anymore; > * Fixed some minor DT binding issues flagged by Philipp; > * Some other minor changes suggested by Lucas; > * Removed YUV formats from the supported formats as these cannot work > without the HDR10 module CSCs and LUTs. Will add them back when I > will add support for video planes; > > Changes in v3: > * rebased to latest linux-next and made it compile as drmP.h was > removed; > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > * fixed a a spurious hang reported by Lukas Hartmann and encountered > by me several times; > * mask DPR and DTG interrupts by default, as they may come enabled from > U-boot; > > Changes in v2: > * Removed '0x' in node's unit-address both in DT and yaml; > * Made the address region size lowercase, to be consistent; > * Removed some left-over references to P010; > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > issues reported by kbuild for other architectures; > > > Laurentiu Palcu (5): > drm/imx: compile imx directory by default > drm/imx: Add initial support for DCSS on iMX8MQ > drm/imx/dcss: use drm_bridge_connector API > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > dt-bindings: display: imx: add bindings for DCSS > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > MAINTAINERS | 8 + > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/imx/Kconfig | 2 + > drivers/gpu/drm/imx/Makefile | 1 + > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > drivers/gpu/drm/imx/dcss/Makefile | 6 + > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > 20 files changed, 4112 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > -- > 2.23.0 >
Hi Laurentiu. > As to who is going to do the actual merge, I know we had a brief > discussion about it some time ago and I was supposed to apply for > drm-misc rights, however it feels a little awkward to merge my own > code... :) You are encouraged to commit your own code, it is anyway you who knows the state of the code best. The golden rule is that the code must have been seen by somone else before you merge, are translated there must be an acked-by or reviewed-by on each of the patches. If you look at ths page: https://people.freedesktop.org/~seanpaul/whomisc.html You can see that a lot of people commit their own code in drm-misc. Example: Daniel Vetter <daniel.vetter@ffwll.ch>, <daniel@ffwll.ch> (authored=159 committed=249 self_committed=153) There is only a few patches written by Daniel that is committed by someone else. And all patches committed by Daniel carries an a-b or -rb by someone else. > Though, I might not even qualify for drm-misc rights anyway, > considering I haven't been very active in this area... :/ > > On that note, I will probably need help with the merging, provided it's > still happenning. Will you be able to help me out with this? If the challenge is only to push the patches to drm-misc-next there is a lot of people that can help you. I would be happy to do so, but would need a resend as I have deleted the patches from my inbox. I could dig the pathces out somewhere else, but a fresh rebase would be preferred. Sam
Hi Laurentiu, On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > Hi Lucas, > > I was wondering about the plans to merge this series. Since not many > people can test it properly due to lack of DCSS support in the upstream > NWL driver (which I heard it's coming soon) and a completely nonexistent > HDP driver, are we going to take a leap of faith and merge it as is? Or > should we wait? I think even if the bridges aren't ready yet, the driver is in a good enough shape to merge it. There's no point in letting it accumulate bitrot while waiting for the bridges to land. Also I guess it will make bridge driver development a lot easier when the DCSS driver is in-tree. > As to who is going to do the actual merge, I know we had a brief > discussion about it some time ago and I was supposed to apply for > drm-misc rights, however it feels a little awkward to merge my own > code... :) Though, I might not even qualify for drm-misc rights anyway, > considering I haven't been very active in this area... :/ Please consider applying for drm-misc merge rights. Even if you don't do the initial merge I think it will come in handy in the long run. > On that note, I will probably need help with the merging, provided it's > still happenning. Will you be able to help me out with this? Sure, I'm having some time available this week. I'll give this v9 another spin on my boards and will do the merge after that. Regards, Lucas > Thanks, > laurentiu > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > Hi, > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > Support for the rest of the features will be added incrementally, in subsequent > > patches. > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > Thanks, > > Laurentiu > > > > Changes in v9: > > * Fixed a compilation issue found by Guido in his setup: 'select > > VIDEOMODE_HELPERS' was missing from Kconfig; > > * Use imx8mq-clock.h in the bindings file so one can understand what > > those clock values mean; > > * no other changes done. Couldn't address the hang Guido reported as > > it's not happening in my setup. However, in my tree, there are some > > extra NWL and ADV patches applied on top of upstream ones... Also, > > removing them and testing only with upstream, even if there's no > > image out, does not produce a hang... :/ > > > > Changes in v8: > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > out. SRC is not used in DCSS driver; > > * Nothing else changed; > > > > Changes in v7: > > * Added a patch to initialize the connector using the drm_bridge_connector > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > patches for ADV and NWL were needed, from our downstream tree, which > > will be upstreamed soon by their author; > > * Rest of the patches are untouched; > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > Changes in v6: > > * Addressed Rob's comment and added "additionalProperties: false" at > > the end of the bindings' properties. However, this change surfaced > > an issue with the assigned-clock* properties not being documented in > > the properties section. Added the descriptions and the bindings patch > > will need another review; > > * Added an entry for DCSS driver in the MAINTAINERS file; > > * Removed the component framework patch altogether; > > > > Changes in v5: > > * Rebased to latest; > > * Took out component framework support and made it a separate patch so > > that people can still test with HDP driver, which makes use of it. > > But the idea is to get rid of it once HDP driver's next versions > > will remove component framework as well; > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > if the new mode and the old one are equal. Also, in this case, is > > not necessary to wait for DTG to shut off. This would allow to switch > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > from DCSS point of view); > > * Do not fire off CTXLD when going to suspend, unless it still has > > entries that need to be committed to DCSS; > > * Addressed Rob's comments on bindings; > > > > Changes in v4: > > * Addressed Lucas and Philipp's comments: > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > * Removed usage of devm_ functions since I'm already doing all the > > clean-up in the submodules_deinit(); > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > * Removed en_completion variable from dcss_crtc since this was > > introduced mainly to avoid vblank timeout warnings which were fixed > > by arming the vblank event in flush() instead of begin(); > > * Removed clks_on and irq_enabled flags since all the calls to > > enabling/disabling clocks and interrupts were balanced; > > * Removed the custom atomic_commit callback and used the DRM core > > helper and, in the process, got rid of a workqueue that wasn't > > necessary anymore; > > * Fixed some minor DT binding issues flagged by Philipp; > > * Some other minor changes suggested by Lucas; > > * Removed YUV formats from the supported formats as these cannot work > > without the HDR10 module CSCs and LUTs. Will add them back when I > > will add support for video planes; > > > > Changes in v3: > > * rebased to latest linux-next and made it compile as drmP.h was > > removed; > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > by me several times; > > * mask DPR and DTG interrupts by default, as they may come enabled from > > U-boot; > > > > Changes in v2: > > * Removed '0x' in node's unit-address both in DT and yaml; > > * Made the address region size lowercase, to be consistent; > > * Removed some left-over references to P010; > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > issues reported by kbuild for other architectures; > > > > > > Laurentiu Palcu (5): > > drm/imx: compile imx directory by default > > drm/imx: Add initial support for DCSS on iMX8MQ > > drm/imx/dcss: use drm_bridge_connector API > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > dt-bindings: display: imx: add bindings for DCSS > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > MAINTAINERS | 8 + > > drivers/gpu/drm/Makefile | 2 +- > > drivers/gpu/drm/imx/Kconfig | 2 + > > drivers/gpu/drm/imx/Makefile | 1 + > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > -- > > 2.23.0 > >
Hi Lucas, Sam, On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote: > Hi Laurentiu, > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > > Hi Lucas, > > > > I was wondering about the plans to merge this series. Since not many > > people can test it properly due to lack of DCSS support in the upstream > > NWL driver (which I heard it's coming soon) and a completely nonexistent > > HDP driver, are we going to take a leap of faith and merge it as is? Or > > should we wait? > > I think even if the bridges aren't ready yet, the driver is in a good > enough shape to merge it. There's no point in letting it accumulate > bitrot while waiting for the bridges to land. Also I guess it will make > bridge driver development a lot easier when the DCSS driver is in-tree. OK, fair enough. > > > As to who is going to do the actual merge, I know we had a brief > > discussion about it some time ago and I was supposed to apply for > > drm-misc rights, however it feels a little awkward to merge my own > > code... :) Though, I might not even qualify for drm-misc rights anyway, > > considering I haven't been very active in this area... :/ > > Please consider applying for drm-misc merge rights. Even if you don't > do the initial merge I think it will come in handy in the long run. OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in a previous email. Since this series will be followed by a bunch of other patches, enabling support for video planes, among other things, I guess I'll need the rights anyway. > > > On that note, I will probably need help with the merging, provided it's > > still happenning. Will you be able to help me out with this? > > Sure, I'm having some time available this week. I'll give this v9 > another spin on my boards and will do the merge after that. Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a v10 after rebasing to latest drm-next. However, no conflicts were encountered and the v9 series applied cleanly. Let me know if you encounter any issues and I can resend it. Thanks, Laurentiu > > Regards, > Lucas > > > Thanks, > > laurentiu > > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > > > Hi, > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > patches. > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > Thanks, > > > Laurentiu > > > > > > Changes in v9: > > > * Fixed a compilation issue found by Guido in his setup: 'select > > > VIDEOMODE_HELPERS' was missing from Kconfig; > > > * Use imx8mq-clock.h in the bindings file so one can understand what > > > those clock values mean; > > > * no other changes done. Couldn't address the hang Guido reported as > > > it's not happening in my setup. However, in my tree, there are some > > > extra NWL and ADV patches applied on top of upstream ones... Also, > > > removing them and testing only with upstream, even if there's no > > > image out, does not produce a hang... :/ > > > > > > Changes in v8: > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > > out. SRC is not used in DCSS driver; > > > * Nothing else changed; > > > > > > Changes in v7: > > > * Added a patch to initialize the connector using the drm_bridge_connector > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > > patches for ADV and NWL were needed, from our downstream tree, which > > > will be upstreamed soon by their author; > > > * Rest of the patches are untouched; > > > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > > > Changes in v6: > > > * Addressed Rob's comment and added "additionalProperties: false" at > > > the end of the bindings' properties. However, this change surfaced > > > an issue with the assigned-clock* properties not being documented in > > > the properties section. Added the descriptions and the bindings patch > > > will need another review; > > > * Added an entry for DCSS driver in the MAINTAINERS file; > > > * Removed the component framework patch altogether; > > > > > > Changes in v5: > > > * Rebased to latest; > > > * Took out component framework support and made it a separate patch so > > > that people can still test with HDP driver, which makes use of it. > > > But the idea is to get rid of it once HDP driver's next versions > > > will remove component framework as well; > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > if the new mode and the old one are equal. Also, in this case, is > > > not necessary to wait for DTG to shut off. This would allow to switch > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > from DCSS point of view); > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > entries that need to be committed to DCSS; > > > * Addressed Rob's comments on bindings; > > > > > > Changes in v4: > > > * Addressed Lucas and Philipp's comments: > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > * Removed usage of devm_ functions since I'm already doing all the > > > clean-up in the submodules_deinit(); > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > * Removed en_completion variable from dcss_crtc since this was > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > by arming the vblank event in flush() instead of begin(); > > > * Removed clks_on and irq_enabled flags since all the calls to > > > enabling/disabling clocks and interrupts were balanced; > > > * Removed the custom atomic_commit callback and used the DRM core > > > helper and, in the process, got rid of a workqueue that wasn't > > > necessary anymore; > > > * Fixed some minor DT binding issues flagged by Philipp; > > > * Some other minor changes suggested by Lucas; > > > * Removed YUV formats from the supported formats as these cannot work > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > will add support for video planes; > > > > > > Changes in v3: > > > * rebased to latest linux-next and made it compile as drmP.h was > > > removed; > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > by me several times; > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > U-boot; > > > > > > Changes in v2: > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > * Made the address region size lowercase, to be consistent; > > > * Removed some left-over references to P010; > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > issues reported by kbuild for other architectures; > > > > > > > > > Laurentiu Palcu (5): > > > drm/imx: compile imx directory by default > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > drm/imx/dcss: use drm_bridge_connector API > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > > dt-bindings: display: imx: add bindings for DCSS > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > > MAINTAINERS | 8 + > > > drivers/gpu/drm/Makefile | 2 +- > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > drivers/gpu/drm/imx/Makefile | 1 + > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > -- > > > 2.23.0 > > > >
Hi Laurentiu, On Fri, Jul 31, 2020 at 10:54:29AM +0200, Guido Günther wrote: > Hi, > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > Hi, > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > Support for the rest of the features will be added incrementally, in subsequent > > patches. > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > Thanks, > > Laurentiu > > > > Changes in v9: > > * Fixed a compilation issue found by Guido in his setup: 'select > > VIDEOMODE_HELPERS' was missing from Kconfig; > > * Use imx8mq-clock.h in the bindings file so one can understand what > > those clock values mean; > > * no other changes done. Couldn't address the hang Guido reported as > > it's not happening in my setup. However, in my tree, there are some > > extra NWL and ADV patches applied on top of upstream ones... Also, > > removing them and testing only with upstream, even if there's no > > image out, does not produce a hang... :/ > > I don't think this should hold up merging. And i retested your v9 series on next-20200903 on a librem5 devkit and it works. Looking back I spotted an error in my clock configuration, so Tested-by: Guido Günther <agx@sigxcpu.org> Cheers, -- Guido > Cheers, > -- Guido > > > > > Changes in v8: > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > out. SRC is not used in DCSS driver; > > * Nothing else changed; > > > > Changes in v7: > > * Added a patch to initialize the connector using the drm_bridge_connector > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > patches for ADV and NWL were needed, from our downstream tree, which > > will be upstreamed soon by their author; > > * Rest of the patches are untouched; > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > Changes in v6: > > * Addressed Rob's comment and added "additionalProperties: false" at > > the end of the bindings' properties. However, this change surfaced > > an issue with the assigned-clock* properties not being documented in > > the properties section. Added the descriptions and the bindings patch > > will need another review; > > * Added an entry for DCSS driver in the MAINTAINERS file; > > * Removed the component framework patch altogether; > > > > Changes in v5: > > * Rebased to latest; > > * Took out component framework support and made it a separate patch so > > that people can still test with HDP driver, which makes use of it. > > But the idea is to get rid of it once HDP driver's next versions > > will remove component framework as well; > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > if the new mode and the old one are equal. Also, in this case, is > > not necessary to wait for DTG to shut off. This would allow to switch > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > from DCSS point of view); > > * Do not fire off CTXLD when going to suspend, unless it still has > > entries that need to be committed to DCSS; > > * Addressed Rob's comments on bindings; > > > > Changes in v4: > > * Addressed Lucas and Philipp's comments: > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > * Removed usage of devm_ functions since I'm already doing all the > > clean-up in the submodules_deinit(); > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > * Removed en_completion variable from dcss_crtc since this was > > introduced mainly to avoid vblank timeout warnings which were fixed > > by arming the vblank event in flush() instead of begin(); > > * Removed clks_on and irq_enabled flags since all the calls to > > enabling/disabling clocks and interrupts were balanced; > > * Removed the custom atomic_commit callback and used the DRM core > > helper and, in the process, got rid of a workqueue that wasn't > > necessary anymore; > > * Fixed some minor DT binding issues flagged by Philipp; > > * Some other minor changes suggested by Lucas; > > * Removed YUV formats from the supported formats as these cannot work > > without the HDR10 module CSCs and LUTs. Will add them back when I > > will add support for video planes; > > > > Changes in v3: > > * rebased to latest linux-next and made it compile as drmP.h was > > removed; > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > by me several times; > > * mask DPR and DTG interrupts by default, as they may come enabled from > > U-boot; > > > > Changes in v2: > > * Removed '0x' in node's unit-address both in DT and yaml; > > * Made the address region size lowercase, to be consistent; > > * Removed some left-over references to P010; > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > issues reported by kbuild for other architectures; > > > > > > Laurentiu Palcu (5): > > drm/imx: compile imx directory by default > > drm/imx: Add initial support for DCSS on iMX8MQ > > drm/imx/dcss: use drm_bridge_connector API > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > dt-bindings: display: imx: add bindings for DCSS > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > MAINTAINERS | 8 + > > drivers/gpu/drm/Makefile | 2 +- > > drivers/gpu/drm/imx/Kconfig | 2 + > > drivers/gpu/drm/imx/Makefile | 1 + > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > -- > > 2.23.0 > >
Hi Laurentiu, On Mo, 2020-08-31 at 14:24 +0300, Laurentiu Palcu wrote: > Hi Lucas, Sam, > > On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote: > > Hi Laurentiu, > > > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > > > Hi Lucas, > > > > > > I was wondering about the plans to merge this series. Since not many > > > people can test it properly due to lack of DCSS support in the upstream > > > NWL driver (which I heard it's coming soon) and a completely nonexistent > > > HDP driver, are we going to take a leap of faith and merge it as is? Or > > > should we wait? > > > > I think even if the bridges aren't ready yet, the driver is in a good > > enough shape to merge it. There's no point in letting it accumulate > > bitrot while waiting for the bridges to land. Also I guess it will make > > bridge driver development a lot easier when the DCSS driver is in-tree. > > OK, fair enough. > > > > As to who is going to do the actual merge, I know we had a brief > > > discussion about it some time ago and I was supposed to apply for > > > drm-misc rights, however it feels a little awkward to merge my own > > > code... :) Though, I might not even qualify for drm-misc rights anyway, > > > considering I haven't been very active in this area... :/ > > > > Please consider applying for drm-misc merge rights. Even if you don't > > do the initial merge I think it will come in handy in the long run. > > OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in > a previous email. Since this series will be followed by a bunch of other > patches, enabling support for video planes, among other things, I guess > I'll need the rights anyway. > > > > On that note, I will probably need help with the merging, provided it's > > > still happenning. Will you be able to help me out with this? > > > > Sure, I'm having some time available this week. I'll give this v9 > > another spin on my boards and will do the merge after that. > > Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a > v10 after rebasing to latest drm-next. However, no conflicts were encountered > and the v9 series applied cleanly. Let me know if you encounter any > issues and I can resend it. I've tested this together with a hacked up eDP bridge driver stack on my boards. The testing hasn't been really in-depth, but things seem to work fine. I have now pushed the whole series into drm-misc-next. Regards, Lucas > Thanks, > Laurentiu > > > Regards, > > Lucas > > > > > Thanks, > > > laurentiu > > > > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > > > > > Hi, > > > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > > patches. > > > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > > > Thanks, > > > > Laurentiu > > > > > > > > Changes in v9: > > > > * Fixed a compilation issue found by Guido in his setup: 'select > > > > VIDEOMODE_HELPERS' was missing from Kconfig; > > > > * Use imx8mq-clock.h in the bindings file so one can understand what > > > > those clock values mean; > > > > * no other changes done. Couldn't address the hang Guido reported as > > > > it's not happening in my setup. However, in my tree, there are some > > > > extra NWL and ADV patches applied on top of upstream ones... Also, > > > > removing them and testing only with upstream, even if there's no > > > > image out, does not produce a hang... :/ > > > > > > > > Changes in v8: > > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > > > out. SRC is not used in DCSS driver; > > > > * Nothing else changed; > > > > > > > > Changes in v7: > > > > * Added a patch to initialize the connector using the drm_bridge_connector > > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > > > patches for ADV and NWL were needed, from our downstream tree, which > > > > will be upstreamed soon by their author; > > > > * Rest of the patches are untouched; > > > > > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > > > > > Changes in v6: > > > > * Addressed Rob's comment and added "additionalProperties: false" at > > > > the end of the bindings' properties. However, this change surfaced > > > > an issue with the assigned-clock* properties not being documented in > > > > the properties section. Added the descriptions and the bindings patch > > > > will need another review; > > > > * Added an entry for DCSS driver in the MAINTAINERS file; > > > > * Removed the component framework patch altogether; > > > > > > > > Changes in v5: > > > > * Rebased to latest; > > > > * Took out component framework support and made it a separate patch so > > > > that people can still test with HDP driver, which makes use of it. > > > > But the idea is to get rid of it once HDP driver's next versions > > > > will remove component framework as well; > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > > if the new mode and the old one are equal. Also, in this case, is > > > > not necessary to wait for DTG to shut off. This would allow to switch > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > > from DCSS point of view); > > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > > entries that need to be committed to DCSS; > > > > * Addressed Rob's comments on bindings; > > > > > > > > Changes in v4: > > > > * Addressed Lucas and Philipp's comments: > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > > * Removed usage of devm_ functions since I'm already doing all the > > > > clean-up in the submodules_deinit(); > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > > * Removed en_completion variable from dcss_crtc since this was > > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > > by arming the vblank event in flush() instead of begin(); > > > > * Removed clks_on and irq_enabled flags since all the calls to > > > > enabling/disabling clocks and interrupts were balanced; > > > > * Removed the custom atomic_commit callback and used the DRM core > > > > helper and, in the process, got rid of a workqueue that wasn't > > > > necessary anymore; > > > > * Fixed some minor DT binding issues flagged by Philipp; > > > > * Some other minor changes suggested by Lucas; > > > > * Removed YUV formats from the supported formats as these cannot work > > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > > will add support for video planes; > > > > > > > > Changes in v3: > > > > * rebased to latest linux-next and made it compile as drmP.h was > > > > removed; > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > > by me several times; > > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > > U-boot; > > > > > > > > Changes in v2: > > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > > * Made the address region size lowercase, to be consistent; > > > > * Removed some left-over references to P010; > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > > issues reported by kbuild for other architectures; > > > > > > > > > > > > Laurentiu Palcu (5): > > > > drm/imx: compile imx directory by default > > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > > drm/imx/dcss: use drm_bridge_connector API > > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > > > dt-bindings: display: imx: add bindings for DCSS > > > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > > > MAINTAINERS | 8 + > > > > drivers/gpu/drm/Makefile | 2 +- > > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > > drivers/gpu/drm/imx/Makefile | 1 + > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > > > -- > > > > 2.23.0 > > > >
On Wed, Sep 9, 2020 at 5:03 PM Lucas Stach <l.stach@pengutronix.de> wrote: > > Hi Laurentiu, > > On Mo, 2020-08-31 at 14:24 +0300, Laurentiu Palcu wrote: > > Hi Lucas, Sam, > > > > On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote: > > > Hi Laurentiu, > > > > > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > > > > Hi Lucas, > > > > > > > > I was wondering about the plans to merge this series. Since not many > > > > people can test it properly due to lack of DCSS support in the upstream > > > > NWL driver (which I heard it's coming soon) and a completely nonexistent > > > > HDP driver, are we going to take a leap of faith and merge it as is? Or > > > > should we wait? > > > > > > I think even if the bridges aren't ready yet, the driver is in a good > > > enough shape to merge it. There's no point in letting it accumulate > > > bitrot while waiting for the bridges to land. Also I guess it will make > > > bridge driver development a lot easier when the DCSS driver is in-tree. > > > > OK, fair enough. > > > > > > As to who is going to do the actual merge, I know we had a brief > > > > discussion about it some time ago and I was supposed to apply for > > > > drm-misc rights, however it feels a little awkward to merge my own > > > > code... :) Though, I might not even qualify for drm-misc rights anyway, > > > > considering I haven't been very active in this area... :/ > > > > > > Please consider applying for drm-misc merge rights. Even if you don't > > > do the initial merge I think it will come in handy in the long run. > > > > OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in > > a previous email. Since this series will be followed by a bunch of other > > patches, enabling support for video planes, among other things, I guess > > I'll need the rights anyway. > > > > > > On that note, I will probably need help with the merging, provided it's > > > > still happenning. Will you be able to help me out with this? > > > > > > Sure, I'm having some time available this week. I'll give this v9 > > > another spin on my boards and will do the merge after that. > > > > Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a > > v10 after rebasing to latest drm-next. However, no conflicts were encountered > > and the v9 series applied cleanly. Let me know if you encounter any > > issues and I can resend it. > > I've tested this together with a hacked up eDP bridge driver stack on > my boards. The testing hasn't been really in-depth, but things seem to > work fine. I have now pushed the whole series into drm-misc-next. Something doesn't compile too well ERROR: modpost: "__aeabi_ldivmod" [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! ERROR: modpost: "__aeabi_uldivmod" [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! Cheers, Daniel > > Regards, > Lucas > > > Thanks, > > Laurentiu > > > > > Regards, > > > Lucas > > > > > > > Thanks, > > > > laurentiu > > > > > > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > > > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > > > > > > > Hi, > > > > > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > > > patches. > > > > > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > > > > > Thanks, > > > > > Laurentiu > > > > > > > > > > Changes in v9: > > > > > * Fixed a compilation issue found by Guido in his setup: 'select > > > > > VIDEOMODE_HELPERS' was missing from Kconfig; > > > > > * Use imx8mq-clock.h in the bindings file so one can understand what > > > > > those clock values mean; > > > > > * no other changes done. Couldn't address the hang Guido reported as > > > > > it's not happening in my setup. However, in my tree, there are some > > > > > extra NWL and ADV patches applied on top of upstream ones... Also, > > > > > removing them and testing only with upstream, even if there's no > > > > > image out, does not produce a hang... :/ > > > > > > > > > > Changes in v8: > > > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > > > > out. SRC is not used in DCSS driver; > > > > > * Nothing else changed; > > > > > > > > > > Changes in v7: > > > > > * Added a patch to initialize the connector using the drm_bridge_connector > > > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > > > > patches for ADV and NWL were needed, from our downstream tree, which > > > > > will be upstreamed soon by their author; > > > > > * Rest of the patches are untouched; > > > > > > > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > > > > > > > Changes in v6: > > > > > * Addressed Rob's comment and added "additionalProperties: false" at > > > > > the end of the bindings' properties. However, this change surfaced > > > > > an issue with the assigned-clock* properties not being documented in > > > > > the properties section. Added the descriptions and the bindings patch > > > > > will need another review; > > > > > * Added an entry for DCSS driver in the MAINTAINERS file; > > > > > * Removed the component framework patch altogether; > > > > > > > > > > Changes in v5: > > > > > * Rebased to latest; > > > > > * Took out component framework support and made it a separate patch so > > > > > that people can still test with HDP driver, which makes use of it. > > > > > But the idea is to get rid of it once HDP driver's next versions > > > > > will remove component framework as well; > > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > > > if the new mode and the old one are equal. Also, in this case, is > > > > > not necessary to wait for DTG to shut off. This would allow to switch > > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > > > from DCSS point of view); > > > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > > > entries that need to be committed to DCSS; > > > > > * Addressed Rob's comments on bindings; > > > > > > > > > > Changes in v4: > > > > > * Addressed Lucas and Philipp's comments: > > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > > > * Removed usage of devm_ functions since I'm already doing all the > > > > > clean-up in the submodules_deinit(); > > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > > > * Removed en_completion variable from dcss_crtc since this was > > > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > > > by arming the vblank event in flush() instead of begin(); > > > > > * Removed clks_on and irq_enabled flags since all the calls to > > > > > enabling/disabling clocks and interrupts were balanced; > > > > > * Removed the custom atomic_commit callback and used the DRM core > > > > > helper and, in the process, got rid of a workqueue that wasn't > > > > > necessary anymore; > > > > > * Fixed some minor DT binding issues flagged by Philipp; > > > > > * Some other minor changes suggested by Lucas; > > > > > * Removed YUV formats from the supported formats as these cannot work > > > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > > > will add support for video planes; > > > > > > > > > > Changes in v3: > > > > > * rebased to latest linux-next and made it compile as drmP.h was > > > > > removed; > > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > > > by me several times; > > > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > > > U-boot; > > > > > > > > > > Changes in v2: > > > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > > > * Made the address region size lowercase, to be consistent; > > > > > * Removed some left-over references to P010; > > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > > > issues reported by kbuild for other architectures; > > > > > > > > > > > > > > > Laurentiu Palcu (5): > > > > > drm/imx: compile imx directory by default > > > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > > > drm/imx/dcss: use drm_bridge_connector API > > > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > > > > dt-bindings: display: imx: add bindings for DCSS > > > > > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > > > > MAINTAINERS | 8 + > > > > > drivers/gpu/drm/Makefile | 2 +- > > > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > > > drivers/gpu/drm/imx/Makefile | 1 + > > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > > > > > -- > > > > > 2.23.0 > > > > > > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Daniel, On Thu, Sep 10, 2020 at 08:47:34AM +0200, Daniel Vetter wrote: > On Wed, Sep 9, 2020 at 5:03 PM Lucas Stach <l.stach@pengutronix.de> wrote: > > > > Hi Laurentiu, > > > > On Mo, 2020-08-31 at 14:24 +0300, Laurentiu Palcu wrote: > > > Hi Lucas, Sam, > > > > > > On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote: > > > > Hi Laurentiu, > > > > > > > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote: > > > > > Hi Lucas, > > > > > > > > > > I was wondering about the plans to merge this series. Since not many > > > > > people can test it properly due to lack of DCSS support in the upstream > > > > > NWL driver (which I heard it's coming soon) and a completely nonexistent > > > > > HDP driver, are we going to take a leap of faith and merge it as is? Or > > > > > should we wait? > > > > > > > > I think even if the bridges aren't ready yet, the driver is in a good > > > > enough shape to merge it. There's no point in letting it accumulate > > > > bitrot while waiting for the bridges to land. Also I guess it will make > > > > bridge driver development a lot easier when the DCSS driver is in-tree. > > > > > > OK, fair enough. > > > > > > > > As to who is going to do the actual merge, I know we had a brief > > > > > discussion about it some time ago and I was supposed to apply for > > > > > drm-misc rights, however it feels a little awkward to merge my own > > > > > code... :) Though, I might not even qualify for drm-misc rights anyway, > > > > > considering I haven't been very active in this area... :/ > > > > > > > > Please consider applying for drm-misc merge rights. Even if you don't > > > > do the initial merge I think it will come in handy in the long run. > > > > > > OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in > > > a previous email. Since this series will be followed by a bunch of other > > > patches, enabling support for video planes, among other things, I guess > > > I'll need the rights anyway. > > > > > > > > On that note, I will probably need help with the merging, provided it's > > > > > still happenning. Will you be able to help me out with this? > > > > > > > > Sure, I'm having some time available this week. I'll give this v9 > > > > another spin on my boards and will do the merge after that. > > > > > > Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a > > > v10 after rebasing to latest drm-next. However, no conflicts were encountered > > > and the v9 series applied cleanly. Let me know if you encounter any > > > issues and I can resend it. > > > > I've tested this together with a hacked up eDP bridge driver stack on > > my boards. The testing hasn't been really in-depth, but things seem to > > work fine. I have now pushed the whole series into drm-misc-next. > > Something doesn't compile too well > > ERROR: modpost: "__aeabi_ldivmod" > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! > ERROR: modpost: "__aeabi_uldivmod" > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! Oops... :/ I guess we need an ARM64 dependency in Kconfig. No 32bit NXP SoC uses this particular display controller. So, that should fix the compilation issue on 32bit. I'll send a fix shortly. Thanks, laurentiu > > Cheers, Daniel > > > > Regards, > > Lucas > > > > > Thanks, > > > Laurentiu > > > > > > > Regards, > > > > Lucas > > > > > > > > > Thanks, > > > > > laurentiu > > > > > > > > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > > > > > > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > > > > > > > > > > > Hi, > > > > > > > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > > > > patches. > > > > > > > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > > > > > > > Thanks, > > > > > > Laurentiu > > > > > > > > > > > > Changes in v9: > > > > > > * Fixed a compilation issue found by Guido in his setup: 'select > > > > > > VIDEOMODE_HELPERS' was missing from Kconfig; > > > > > > * Use imx8mq-clock.h in the bindings file so one can understand what > > > > > > those clock values mean; > > > > > > * no other changes done. Couldn't address the hang Guido reported as > > > > > > it's not happening in my setup. However, in my tree, there are some > > > > > > extra NWL and ADV patches applied on top of upstream ones... Also, > > > > > > removing them and testing only with upstream, even if there's no > > > > > > image out, does not produce a hang... :/ > > > > > > > > > > > > Changes in v8: > > > > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > > > > > > out. SRC is not used in DCSS driver; > > > > > > * Nothing else changed; > > > > > > > > > > > > Changes in v7: > > > > > > * Added a patch to initialize the connector using the drm_bridge_connector > > > > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > > > > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > > > > > > patches for ADV and NWL were needed, from our downstream tree, which > > > > > > will be upstreamed soon by their author; > > > > > > * Rest of the patches are untouched; > > > > > > > > > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > > > > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > > > > > > > > > > > Changes in v6: > > > > > > * Addressed Rob's comment and added "additionalProperties: false" at > > > > > > the end of the bindings' properties. However, this change surfaced > > > > > > an issue with the assigned-clock* properties not being documented in > > > > > > the properties section. Added the descriptions and the bindings patch > > > > > > will need another review; > > > > > > * Added an entry for DCSS driver in the MAINTAINERS file; > > > > > > * Removed the component framework patch altogether; > > > > > > > > > > > > Changes in v5: > > > > > > * Rebased to latest; > > > > > > * Took out component framework support and made it a separate patch so > > > > > > that people can still test with HDP driver, which makes use of it. > > > > > > But the idea is to get rid of it once HDP driver's next versions > > > > > > will remove component framework as well; > > > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > > > > if the new mode and the old one are equal. Also, in this case, is > > > > > > not necessary to wait for DTG to shut off. This would allow to switch > > > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > > > > from DCSS point of view); > > > > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > > > > entries that need to be committed to DCSS; > > > > > > * Addressed Rob's comments on bindings; > > > > > > > > > > > > Changes in v4: > > > > > > * Addressed Lucas and Philipp's comments: > > > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > > > > * Removed usage of devm_ functions since I'm already doing all the > > > > > > clean-up in the submodules_deinit(); > > > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > > > > * Removed en_completion variable from dcss_crtc since this was > > > > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > > > > by arming the vblank event in flush() instead of begin(); > > > > > > * Removed clks_on and irq_enabled flags since all the calls to > > > > > > enabling/disabling clocks and interrupts were balanced; > > > > > > * Removed the custom atomic_commit callback and used the DRM core > > > > > > helper and, in the process, got rid of a workqueue that wasn't > > > > > > necessary anymore; > > > > > > * Fixed some minor DT binding issues flagged by Philipp; > > > > > > * Some other minor changes suggested by Lucas; > > > > > > * Removed YUV formats from the supported formats as these cannot work > > > > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > > > > will add support for video planes; > > > > > > > > > > > > Changes in v3: > > > > > > * rebased to latest linux-next and made it compile as drmP.h was > > > > > > removed; > > > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > > > > by me several times; > > > > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > > > > U-boot; > > > > > > > > > > > > Changes in v2: > > > > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > > > > * Made the address region size lowercase, to be consistent; > > > > > > * Removed some left-over references to P010; > > > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > > > > issues reported by kbuild for other architectures; > > > > > > > > > > > > > > > > > > Laurentiu Palcu (5): > > > > > > drm/imx: compile imx directory by default > > > > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > > > > drm/imx/dcss: use drm_bridge_connector API > > > > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > > > > > > dt-bindings: display: imx: add bindings for DCSS > > > > > > > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > > > > > > MAINTAINERS | 8 + > > > > > > drivers/gpu/drm/Makefile | 2 +- > > > > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > > > > drivers/gpu/drm/imx/Makefile | 1 + > > > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > > > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > > > > 20 files changed, 4112 insertions(+), 1 deletion(-) > > > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > > > > > > > -- > > > > > > 2.23.0 > > > > > > > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch
Hi Laurentiu > > > I've tested this together with a hacked up eDP bridge driver stack on > > > my boards. The testing hasn't been really in-depth, but things seem to > > > work fine. I have now pushed the whole series into drm-misc-next. > > > > Something doesn't compile too well > > > > ERROR: modpost: "__aeabi_ldivmod" > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! > > ERROR: modpost: "__aeabi_uldivmod" > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined! > > Oops... :/ I guess we need an ARM64 dependency in Kconfig. No > 32bit NXP SoC uses this particular display controller. So, that should > fix the compilation issue on 32bit. Build coverage for ARM64 is an OK short term fix. Please fix the driver so we can build test it for all architectures. The chance to miss something when refactoring if only build for ARM64 is too high. The fix can land when it is ready, and is not urgent. Sam
From: Laurentiu Palcu <laurentiu.palcu@nxp.com> Hi, This patchset adds initial DCSS support for iMX8MQ chip. Initial support includes only graphics plane support (no video planes), no HDR10 capabilities, no graphics decompression (only linear, tiled and super-tiled buffers allowed). Support for the rest of the features will be added incrementally, in subsequent patches. The patchset was tested with both HDP driver (in the downstream tree) and the upstream MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). Thanks, Laurentiu Changes in v9: * Fixed a compilation issue found by Guido in his setup: 'select VIDEOMODE_HELPERS' was missing from Kconfig; * Use imx8mq-clock.h in the bindings file so one can understand what those clock values mean; * no other changes done. Couldn't address the hang Guido reported as it's not happening in my setup. However, in my tree, there are some extra NWL and ADV patches applied on top of upstream ones... Also, removing them and testing only with upstream, even if there's no image out, does not produce a hang... :/ Changes in v8: * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed out. SRC is not used in DCSS driver; * Nothing else changed; Changes in v7: * Added a patch to initialize the connector using the drm_bridge_connector API as Sam suggested. Tested it using NWL_DSI and ADV7535 with Guido's patch [1] applied and one fix for ADV [2]. Also, some extra patches for ADV and NWL were needed, from our downstream tree, which will be upstreamed soon by their author; * Rest of the patches are untouched; [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html Changes in v6: * Addressed Rob's comment and added "additionalProperties: false" at the end of the bindings' properties. However, this change surfaced an issue with the assigned-clock* properties not being documented in the properties section. Added the descriptions and the bindings patch will need another review; * Added an entry for DCSS driver in the MAINTAINERS file; * Removed the component framework patch altogether; Changes in v5: * Rebased to latest; * Took out component framework support and made it a separate patch so that people can still test with HDP driver, which makes use of it. But the idea is to get rid of it once HDP driver's next versions will remove component framework as well; * Slight improvement to modesetting: avoid cutting off the pixel clock if the new mode and the old one are equal. Also, in this case, is not necessary to wait for DTG to shut off. This would allow to switch from 8b RGB to 12b YUV422, for example, with no interruptions (at least from DCSS point of view); * Do not fire off CTXLD when going to suspend, unless it still has entries that need to be committed to DCSS; * Addressed Rob's comments on bindings; Changes in v4: * Addressed Lucas and Philipp's comments: * Added DRM_KMS_CMA_HELPER dependency in Kconfig; * Removed usage of devm_ functions since I'm already doing all the clean-up in the submodules_deinit(); * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); * Removed en_completion variable from dcss_crtc since this was introduced mainly to avoid vblank timeout warnings which were fixed by arming the vblank event in flush() instead of begin(); * Removed clks_on and irq_enabled flags since all the calls to enabling/disabling clocks and interrupts were balanced; * Removed the custom atomic_commit callback and used the DRM core helper and, in the process, got rid of a workqueue that wasn't necessary anymore; * Fixed some minor DT binding issues flagged by Philipp; * Some other minor changes suggested by Lucas; * Removed YUV formats from the supported formats as these cannot work without the HDR10 module CSCs and LUTs. Will add them back when I will add support for video planes; Changes in v3: * rebased to latest linux-next and made it compile as drmP.h was removed; * removed the patch adding the VIDEO2_PLL clock. It's already applied; * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); * fixed a a spurious hang reported by Lukas Hartmann and encountered by me several times; * mask DPR and DTG interrupts by default, as they may come enabled from U-boot; Changes in v2: * Removed '0x' in node's unit-address both in DT and yaml; * Made the address region size lowercase, to be consistent; * Removed some left-over references to P010; * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation issues reported by kbuild for other architectures; Laurentiu Palcu (5): drm/imx: compile imx directory by default drm/imx: Add initial support for DCSS on iMX8MQ drm/imx/dcss: use drm_bridge_connector API MAINTAINERS: Add entry for i.MX 8MQ DCSS driver dt-bindings: display: imx: add bindings for DCSS .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ MAINTAINERS | 8 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/imx/Kconfig | 2 + drivers/gpu/drm/imx/Makefile | 1 + drivers/gpu/drm/imx/dcss/Kconfig | 9 + drivers/gpu/drm/imx/dcss/Makefile | 6 + drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ 20 files changed, 4112 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig create mode 100644 drivers/gpu/drm/imx/dcss/Makefile create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c