[v6,0/9] hwmon: pmbus: adm1266: add support

From: Alexandru Tachici <alexandru.tachici@analog.com>

Add PMBus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.

1. Add PMBus probing driver for inputs vh1->vh4
and vp1->vp13.

2. Add Block Write-Read Process Call command.
A PMBus specific implementation was required because
block write with I2C_SMBUS_PROC_CALL flag allows a
maximum of 32 bytes to be received.

3. This makes adm1266 driver expose GPIOs
to user-space. Currently are read only. Future
developments on the firmware will allow
them to be writable.

4. Allow the current sate of the seqeuncer to be read
through debugfs.

5. Blackboxes are 64 bytes of chip state related data
that is generated on faults. Use the nvmem kernel api
to expose the blackbox chip functionality to userspace.

6. Add group command support. This will allow the driver
to stop/program all cascaded adm1266 devices at once.

7. Writing the firmware hex file with offset 0
to the nvmem of the master adm1266 will trigger
the firmware programming of all cascaded devices.
The master adm1266 of each device is specified in
the devicetree.

8. Writing the configuration hex file to 0x30000
byte address of the nvmem file will trigger the
programing of that device in particular.

9. dt bindings for ADM1266.

Alexandru Tachici (9):
  hwmon: pmbus: adm1266: add support
  hwmon: pmbus: adm1266: Add Block process call
  hwmon: pmbus: adm1266: Add support for GPIOs
  hwmon: pmbus: adm1266: add debugfs for states
  hwmon: pmbus: adm1266: read blackbox
  hwmon: pmbus: adm1266: Add group command support
  hwmon: pmbus: adm1266: program firmware
  hwmon: pmbus: adm1266: program configuration
  dt-bindings: hwmon: Add bindings for ADM1266

 .../bindings/hwmon/adi,adm1266.yaml           |   56 +
 Documentation/hwmon/adm1266.rst               |   37 +
 Documentation/hwmon/index.rst                 |    1 +
 drivers/hwmon/pmbus/Kconfig                   |   10 +
 drivers/hwmon/pmbus/Makefile                  |    1 +
 drivers/hwmon/pmbus/adm1266.c                 | 1273 +++++++++++++++++
 6 files changed, 1378 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
 create mode 100644 Documentation/hwmon/adm1266.rst
 create mode 100644 drivers/hwmon/pmbus/adm1266.c

On 7/26/20 10:31 PM, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add PMBus probing driver for the adm1266 Cascadable
> Super Sequencer with Margin Control and Fault Recording.
> Driver is using the pmbus_core, creating sysfs files
> under hwmon for inputs: vh1->vh4 and vp1->vp13.
> 

What happened to change logs ? Do you really expect me
to go through the history of this series to figure out
what changed from and in previous revisions of this
patch set ?

Guenter

> 1. Add PMBus probing driver for inputs vh1->vh4
> and vp1->vp13.
> 
> 2. Add Block Write-Read Process Call command.
> A PMBus specific implementation was required because
> block write with I2C_SMBUS_PROC_CALL flag allows a
> maximum of 32 bytes to be received.
> 
> 3. This makes adm1266 driver expose GPIOs
> to user-space. Currently are read only. Future
> developments on the firmware will allow
> them to be writable.
> 
> 4. Allow the current sate of the seqeuncer to be read
> through debugfs.
> 
> 5. Blackboxes are 64 bytes of chip state related data
> that is generated on faults. Use the nvmem kernel api
> to expose the blackbox chip functionality to userspace.
> 
> 6. Add group command support. This will allow the driver
> to stop/program all cascaded adm1266 devices at once.
> 
> 7. Writing the firmware hex file with offset 0
> to the nvmem of the master adm1266 will trigger
> the firmware programming of all cascaded devices.
> The master adm1266 of each device is specified in
> the devicetree.
> 
> 8. Writing the configuration hex file to 0x30000
> byte address of the nvmem file will trigger the
> programing of that device in particular.
> 
> 9. dt bindings for ADM1266.
> 
> Alexandru Tachici (9):
>   hwmon: pmbus: adm1266: add support
>   hwmon: pmbus: adm1266: Add Block process call
>   hwmon: pmbus: adm1266: Add support for GPIOs
>   hwmon: pmbus: adm1266: add debugfs for states
>   hwmon: pmbus: adm1266: read blackbox
>   hwmon: pmbus: adm1266: Add group command support
>   hwmon: pmbus: adm1266: program firmware
>   hwmon: pmbus: adm1266: program configuration
>   dt-bindings: hwmon: Add bindings for ADM1266
> 
>  .../bindings/hwmon/adi,adm1266.yaml           |   56 +
>  Documentation/hwmon/adm1266.rst               |   37 +
>  Documentation/hwmon/index.rst                 |    1 +
>  drivers/hwmon/pmbus/Kconfig                   |   10 +
>  drivers/hwmon/pmbus/Makefile                  |    1 +
>  drivers/hwmon/pmbus/adm1266.c                 | 1273 +++++++++++++++++
>  6 files changed, 1378 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
>  create mode 100644 Documentation/hwmon/adm1266.rst
>  create mode 100644 drivers/hwmon/pmbus/adm1266.c
>