mbox series

[v4,0/5] Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board.

Message ID 20200714053229.33195-1-zhouyanjie@wanyeetech.com
Headers show
Series Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board. | expand

Message

Zhou Yanjie July 14, 2020, 5:32 a.m. UTC 
v3->v4:
1.Modify the commit message and add the change description
  for CU1000-Neo in patch [2/5].
2.The wrongly written "ingenic,x1000" in compatible is
  changed to "ingenic,x1000e" in "cu1000-neo.dts".
3.Adjust the order of nodes according to the corresponding
  address value for X1000.
4.Drop unnecessary node in "wlan_pwrseq" in "cu1000-neo.dts".
5.Add the leds node to "cu1000-neo.dts".

周琰杰 (Zhou Yanjie) (5):
  MIPS: Ingenic: Add Ingenic X1830 support.
  dt-bindings: MIPS: Add X1830 based CU1830-Neo and fix bug in
    CU1000-Neo.
  MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
  MIPS: Ingenic: Fix bugs and add missing LED node for X1000.
  MIPS: CU1000-Neo: Refresh defconfig to support LED.

 .../devicetree/bindings/mips/ingenic/devices.yaml  |  12 +-
 arch/mips/boot/dts/ingenic/Makefile                |   1 +
 arch/mips/boot/dts/ingenic/cu1000-neo.dts          | 114 ++++----
 arch/mips/boot/dts/ingenic/cu1830-neo.dts          | 168 ++++++++++++
 arch/mips/boot/dts/ingenic/x1000.dtsi              | 126 +++++----
 arch/mips/boot/dts/ingenic/x1830.dtsi              | 300 +++++++++++++++++++++
 arch/mips/configs/cu1000-neo_defconfig             |   4 +
 arch/mips/configs/cu1830-neo_defconfig             | 123 +++++++++
 arch/mips/jz4740/Kconfig                           |  10 +
 9 files changed, 733 insertions(+), 125 deletions(-)
 create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
 create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
 create mode 100644 arch/mips/configs/cu1830-neo_defconfig

Comments

Thomas Bogendoerfer July 16, 2020, 9:51 a.m. UTC | #1 
On Tue, Jul 14, 2020 at 01:32:24PM +0800, 周琰杰 (Zhou Yanjie) wrote:
> v3->v4:
> 1.Modify the commit message and add the change description
>   for CU1000-Neo in patch [2/5].
> 2.The wrongly written "ingenic,x1000" in compatible is
>   changed to "ingenic,x1000e" in "cu1000-neo.dts".
> 3.Adjust the order of nodes according to the corresponding
>   address value for X1000.
> 4.Drop unnecessary node in "wlan_pwrseq" in "cu1000-neo.dts".
> 5.Add the leds node to "cu1000-neo.dts".
> 
> 周琰杰 (Zhou Yanjie) (5):
>   MIPS: Ingenic: Add Ingenic X1830 support.
>   dt-bindings: MIPS: Add X1830 based CU1830-Neo and fix bug in
>     CU1000-Neo.
>   MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
>   MIPS: Ingenic: Fix bugs and add missing LED node for X1000.
>   MIPS: CU1000-Neo: Refresh defconfig to support LED.
> 
>  .../devicetree/bindings/mips/ingenic/devices.yaml  |  12 +-
>  arch/mips/boot/dts/ingenic/Makefile                |   1 +
>  arch/mips/boot/dts/ingenic/cu1000-neo.dts          | 114 ++++----
>  arch/mips/boot/dts/ingenic/cu1830-neo.dts          | 168 ++++++++++++
>  arch/mips/boot/dts/ingenic/x1000.dtsi              | 126 +++++----
>  arch/mips/boot/dts/ingenic/x1830.dtsi              | 300 +++++++++++++++++++++
>  arch/mips/configs/cu1000-neo_defconfig             |   4 +
>  arch/mips/configs/cu1830-neo_defconfig             | 123 +++++++++
>  arch/mips/jz4740/Kconfig                           |  10 +
>  9 files changed, 733 insertions(+), 125 deletions(-)
>  create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
>  create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
>  create mode 100644 arch/mips/configs/cu1830-neo_defconfig

series applied to mips-next.

Thomas.