From patchwork Fri Nov 1 08:41:20 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peter Ujfalusi X-Patchwork-Id: 1187834 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="nJv0VLLZ"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 474G0N6d2Fz9sRM for ; Fri, 1 Nov 2019 19:42:28 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726722AbfKAIkp (ORCPT ); Fri, 1 Nov 2019 04:40:45 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:50102 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727329AbfKAIkp (ORCPT ); Fri, 1 Nov 2019 04:40:45 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id xA18eVbb129956; Fri, 1 Nov 2019 03:40:31 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1572597631; bh=hpB4/pfwqA0v+aI/DxgXbZDYFtREfksT2VZBIVXiZ0s=; h=From:To:CC:Subject:Date; b=nJv0VLLZxn9GgZdUhNo7iBbHauw5PUH0oEDWsdA0rIJ1LQD0xA25iuWW8gDABAeyk 1mWnmxgHTPJoOWp+zNecH4ehtb8uxBNkinTZe9kobQskRV4tWxIOf5qJWX2/oKouWs 34rRLyyPWBWHk5C1o4o8hqbEZWVxN/p9yXg4WClU= Received: from DFLE107.ent.ti.com (dfle107.ent.ti.com [10.64.6.28]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id xA18eVDH121547; Fri, 1 Nov 2019 03:40:31 -0500 Received: from DFLE103.ent.ti.com (10.64.6.24) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Fri, 1 Nov 2019 03:40:16 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DFLE103.ent.ti.com (10.64.6.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Fri, 1 Nov 2019 03:40:29 -0500 Received: from feketebors.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id xA18eP8Z036903; Fri, 1 Nov 2019 03:40:26 -0500 From: Peter Ujfalusi To: , , , CC: , , , , , , , , , Subject: [PATCH v4 00/15] dmaengine/soc: Add Texas Instruments UDMA support Date: Fri, 1 Nov 2019 10:41:20 +0200 Message-ID: <20191101084135.14811-1-peter.ujfalusi@ti.com> X-Mailer: git-send-email 2.23.0 MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Hi, Changes since v3 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): - Based on 5.4-rc5 - Fixed typos pointed out by Tero - Added reviewed-by tags from Tero - ring accelerator driver - TODO_GS is removed from the header - pm_runtime removed as NAVSS and it's components are always on - Check validity of Message mode setup (element size > 8 bytes must use proxy) - cppi5 header - add commit message - UDMAP DT bindings - Drop the psil-config node use on the remote PSI-L side and use only one cell which is the remote threadID: dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; dma-names = "tx", "rx"; - The PSI-L thread configuration description is moved to kernel as a new module: k3-psil/k3-psil-am654/k3-psil-j721e - ti,psil-base has been removed and moved to kernel - removed the no longer needed dt-bindings/dma/k3-udma.h - Convert the document to schema (yaml) - NEW PSI-L endpoint configuration database - a simple database holding the remote end's configuration needed for UDMAP configuration. All previous parameters from DT has been moved here and merged with the linux only tr mode channel flag. - Client drivers can update the remote endpoint configuration as it can be different based on system configuration and the endpoint itself is under the control of the peripheral driver. - database for am654 and j721e - UDMAP DMAengine driver - pm_runtime removed as NAVSS and it's components are always on - rchan_oes_offset added to MSI dommain allocation - Use the new PSI-L endpoint database for UDMAP configuration - Support for waiting for PDMA teardown completion on j721e instead of returning right away. depends on: https://lkml.org/lkml/2019/10/25/189 Not included in this series, but it is in the branch I have prepared. - psil-base is moved from DT to be part of udma_match_data - tr_thread maps is removed and using the PSI-L endpoint configuration for it - UDMAP glue layer - pm_runtime removed as NAVSS and it's components are always on - Use the new PSI-L endpoint database for UDMAP configuration Changes since v2 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) - Based on 5.4-rc1 - Support for Flow only data transfer for the glue layer - cppi5 header - comments converted to kernel-doc style - Remove the excessive WARN_ONs and rely on the user for sanity - new macro for checking TearDown Completion Message - ring accelerator driver - fixed up th commit message (SoB, TI-SCI) - fixed ring reset - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions and use dev_dbg() - k3_ringacc_ring_dump() is moved to static - step numbering removed from k3_ringacc_ring_reset_dma() - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined - K3_RINGACC_RING_MODE_QM is removed as it is not supported - UDMAP DT bindings - Fix property prefixing: s/pdma,/ti,pdma- - Add ti,notdpkt property to suppress teardown completion message on tchan - example updated accordingly - UDMAP DMAengine driver - Change __raw_readl/writel to readl/writel - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci configuration functions for clarity - DT bindings change: s/pdma,/ti,pdma- - Cleanup of udma_tx_status(): - residue calculation fix for m2m - no need to read packet counter as it is not used - peer byte counter only available in PDMAs - Proper locking to avoid race with interrupt handler (polled m2m fix) - Support for ti,notdpkt - RFLOW management rework to support data movement without channel: - the channel is not controlled by Linux but other core and we only have rflows and rings to do the DMA transfers. This mode is only supported by the Glue layer for now. - UDMAP glue layer - Debug print improvements - Support for rflow/ring only data movement Changes since v1 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) - Added support for j721e - Based on 5.3-rc2 - dropped ti_sci API patch for RM management as it is already upstream - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() - Added Rob's Reviewed-by to ringacc DT binding document patch - DT bindings changes: - linux,udma-mode is gone, I have a simple lookup table in the driver to flag TR channels. - Support for j721e - Fix bug in of_node_put() handling in xlate function Changes since RFC (https://patchwork.kernel.org/cover/10612465/): - Based on linux-next (20190506) which now have the ti_sci interrupt support - The series can be applied and the UDMA via DMAengine API will be functional - Included in the series: ti_sci Resource management API, cppi5 header and driver for the ring accelerator. - The DMAengine core patches have been updated as per the review comments for earlier submittion. - The DMAengine driver patch is artificially split up to 6 smaller patches The k3-udma driver implements the Data Movement Architecture described in AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and j721e TRM (http://www.ti.com/lit/pdf/spruil1) This DMA architecture is a big departure from 'traditional' architecture where we had either EDMA or sDMA as system DMA. Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) or USB (am335x) while other peripherals were serviced by EDMA. In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and TR mode (similar to EDMA descriptor). The data movement is done within a PSI-L fabric, peripherals (including the UDMA-P) are not addressed by their I/O register as with traditional DMAs but with their PSI-L thread ID. In AM65x/j721e we have two main type of peripherals: Legacy: McASP, McSPI, UART, etc. to provide connectivity they are serviced by PDMA (Peripheral DMA) PDMA threads are locked to service a given peripheral, for example PSI-L thread 0x4400/0xc400 is to service McASP0 rx/tx. The PDMa configuration can be done via the UDMA Real Time Peer registers. Native: Networking, security accelerator these peripherals have native support for PSI-L. To be able to use the DMA the following generic steps need to be taken: - configure a DMA channel (tchan for TX, rchan for RX) - channel mode: Packet or TR mode - for memcpy a tchan and rchan pair is used. - for packet mode RX we also need to configure a receive flow to configure the packet receiption - the source and destination threads must be paired - at minimum one pair of rings need to be configured: - tx: transfer ring and transfer completion ring - rx: free descriptor ring and receive ring - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring - If the channel is in packet mode or configured to memcpy then we only need one interrupt from the ring, events from UDMAP is not used. When the channel setup is completed we only interract with the rings: - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by the UDMA-P - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to the r_ring. Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the case in previous DMAs we need to report the amount of data held in these FIFOs to clients (delay calculation for ALSA, UART FIFO flush support). Metadata support: DMAengine user driver was posted upstream based/tested on the v1 of the UDMA series: https://lkml.org/lkml/2019/6/28/20 SA2UL is using the metadata DMAengine API. Note on the last patch: In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case anymore and the DMAengine API currently missing support for the features we would need to support networking, things like - support for receive descriptor 'classification' - we need to support several receive queues for a channel. - the queues are used for packet priority handling for example, but they can be used to have pools of descriptors for different sizes. - out of order completion of descriptors on a channel - when we have several queues to handle different priority packets the descriptors will be completed 'out-of-order' - NAPI type of operation (polling instead of interrupt driven transfer) - without this we can not sustain gigabit speeds and we need to support NAPI - not to limit this to networking, but other high performance operations It is my intention to work on these to be able to remove the 'glue' layer and switch to DMAengine API - or have an API aside of DMAengine to have generic way to support networking, but given how controversial and not trivial these changes are we need something to support networking. The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.4-rc5 is available: https://github.com/omap-audio/linux-audio.git peter/udma/series_v4-5.4-rc5 Regards, Peter Reviewed-by: Tero Kristo Reviewed-by: Grygorii Strashko --- Grygorii Strashko (3): bindings: soc: ti: add documentation for k3 ringacc soc: ti: k3: add navss ringacc driver dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi (12): dmaengine: doc: Add sections for per descriptor metadata support dmaengine: Add metadata_ops for dma_async_tx_descriptor dmaengine: Add support for reporting DMA cached data amount dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA dmaengine: ti: k3 PSI-L remote endpoint configuration dt-bindings: dma: ti: Add document for K3 UDMA dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io func dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate and filter_fn dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free chan_resources dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks 1 dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks 2 dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile .../devicetree/bindings/dma/ti/k3-udma.yaml | 190 + .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + Documentation/driver-api/dmaengine/client.rst | 75 + .../driver-api/dmaengine/provider.rst | 46 + drivers/dma/dmaengine.c | 73 + drivers/dma/dmaengine.h | 8 + drivers/dma/ti/Kconfig | 26 + drivers/dma/ti/Makefile | 3 + drivers/dma/ti/k3-psil-am654.c | 172 + drivers/dma/ti/k3-psil-j721e.c | 219 ++ drivers/dma/ti/k3-psil-priv.h | 39 + drivers/dma/ti/k3-psil.c | 97 + drivers/dma/ti/k3-udma-glue.c | 1202 ++++++ drivers/dma/ti/k3-udma-private.c | 133 + drivers/dma/ti/k3-udma.c | 3425 +++++++++++++++++ drivers/dma/ti/k3-udma.h | 151 + drivers/soc/ti/Kconfig | 12 + drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-ringacc.c | 1158 ++++++ include/linux/dma/k3-psil.h | 47 + include/linux/dma/k3-udma-glue.h | 134 + include/linux/dma/ti-cppi5.h | 1049 +++++ include/linux/dmaengine.h | 110 + include/linux/soc/ti/k3-ringacc.h | 244 ++ 24 files changed, 8673 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt create mode 100644 drivers/dma/ti/k3-psil-am654.c create mode 100644 drivers/dma/ti/k3-psil-j721e.c create mode 100644 drivers/dma/ti/k3-psil-priv.h create mode 100644 drivers/dma/ti/k3-psil.c create mode 100644 drivers/dma/ti/k3-udma-glue.c create mode 100644 drivers/dma/ti/k3-udma-private.c create mode 100644 drivers/dma/ti/k3-udma.c create mode 100644 drivers/dma/ti/k3-udma.h create mode 100644 drivers/soc/ti/k3-ringacc.c create mode 100644 include/linux/dma/k3-psil.h create mode 100644 include/linux/dma/k3-udma-glue.h create mode 100644 include/linux/dma/ti-cppi5.h create mode 100644 include/linux/soc/ti/k3-ringacc.h