| Message ID | CAB0FRssio4MnFavizgHUnLa-_tJAZAUNcb4hxKb=RjQKoXnfQg@mail.gmail.com |
|---|---|
| State | Not Applicable |
| Headers | show |
2012/11/5 François Perrad <francois.perrad@gadz.org> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru>: > > > > > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru> > >> > >> > >> > >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > >>> > >>> > >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote: > >>> > >>> > this afternoon, Thomas has posted 3 patches for qemu (see > >>> > http://patchwork.ozlabs.org/patch/197055/). > >>> > Alexander, try to rebuild host-qemu with them. > >>> > >>> Unfortunately, none of those patches have a chance to fix Alexander's > >>> problem. My patches only fix missing dependencies. > >>> > >>> Also, could you have a look at http://autobuild.buildroot.org/ for > perl > >>> build failures? It seems like Qemu doesn't start properly on some > >>> platforms, for some reason. > >>> > >>> Thomas > >>> -- > >>> Thomas Petazzoni, Free Electrons > >>> Kernel, drivers, real-time and embedded Linux > >>> development, consulting, training and support. > >>> http://free-electrons.com > >> > >> > >> > >> I applied your patch but looks it not helps me. > >> > >> http://pastie.org/5188031 > > > > > > > > Also if i compile it by my default system gcc it's ok > > > > > > [fdkit@kvm-host UU]$ gcc try.c > > [fdkit@kvm-host UU]$ ls ./a.out > > ./a.out* > > [fdkit@kvm-host UU]$ ./a.out > > Ok > > > > Alexander, > > the 'qemu-arm' built by Buildroot doesn't work properly. > could you try this workaround ? > 1) install a 'qemu-arm' with your distro package manager, > $ apt-get install qemu-kvm-extras # or equivalent > 2) apply this patch : > --- a/package/perl/perl.mk > +++ b/package/perl/perl.mk > @@ -22,7 +22,7 @@ endif > > PERL_CONF_OPT = -des \ > -Dusecrosscompile \ > - -Dtargetrun=$(QEMU_USER) \ > + -Dtargetrun=qemu-arm \ > -Dqemulib=$(STAGING_DIR) \ > -Dar="$(TARGET_AR)" \ > -Dcc="$(TARGET_CC)" \ > > François > I migrated my build system to fresh linux installation with 3.5.1 kernel Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Applied your patch, and problem still here. http://pastie.org/5336882
2012/11/7 Alexander Khryukin <alexander@mezon.ru> > > > 2012/11/5 François Perrad <francois.perrad@gadz.org> > >> 2012/11/5 Alexander Khryukin <alexander@mezon.ru>: >> > >> > >> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru> >> >> >> >> >> >> >> >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> >> >>> >> >>> >> >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote: >> >>> >> >>> > this afternoon, Thomas has posted 3 patches for qemu (see >> >>> > http://patchwork.ozlabs.org/patch/197055/). >> >>> > Alexander, try to rebuild host-qemu with them. >> >>> >> >>> Unfortunately, none of those patches have a chance to fix Alexander's >> >>> problem. My patches only fix missing dependencies. >> >>> >> >>> Also, could you have a look at http://autobuild.buildroot.org/ for >> perl >> >>> build failures? It seems like Qemu doesn't start properly on some >> >>> platforms, for some reason. >> >>> >> >>> Thomas >> >>> -- >> >>> Thomas Petazzoni, Free Electrons >> >>> Kernel, drivers, real-time and embedded Linux >> >>> development, consulting, training and support. >> >>> http://free-electrons.com >> >> >> >> >> >> >> >> I applied your patch but looks it not helps me. >> >> >> >> http://pastie.org/5188031 >> > >> > >> > >> > Also if i compile it by my default system gcc it's ok >> > >> > >> > [fdkit@kvm-host UU]$ gcc try.c >> > [fdkit@kvm-host UU]$ ls ./a.out >> > ./a.out* >> > [fdkit@kvm-host UU]$ ./a.out >> > Ok >> > >> >> Alexander, >> >> the 'qemu-arm' built by Buildroot doesn't work properly. >> could you try this workaround ? >> 1) install a 'qemu-arm' with your distro package manager, >> $ apt-get install qemu-kvm-extras # or equivalent >> 2) apply this patch : >> --- a/package/perl/perl.mk >> +++ b/package/perl/perl.mk >> @@ -22,7 +22,7 @@ endif >> >> PERL_CONF_OPT = -des \ >> -Dusecrosscompile \ >> - -Dtargetrun=$(QEMU_USER) \ >> + -Dtargetrun=qemu-arm \ >> -Dqemulib=$(STAGING_DIR) \ >> -Dar="$(TARGET_AR)" \ >> -Dcc="$(TARGET_CC)" \ >> >> François >> > > > I migrated my build system to fresh linux installation with 3.5.1 kernel > Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug > 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > > Applied your patch, and problem still here. > > http://pastie.org/5336882 > > Bump! I don't know how to solve it.
On 11/7/2012 1:53 AM, Alexander Khryukin wrote: > > > 2012/11/7 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>> > > > > 2012/11/5 François Perrad <francois.perrad@gadz.org > <mailto:francois.perrad@gadz.org>> > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>>: > > > > > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>> > >> > >> > >> > >> 2012/11/5 Thomas Petazzoni > <thomas.petazzoni@free-electrons.com > <mailto:thomas.petazzoni@free-electrons.com>> > >>> > >>> > >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote: > >>> > >>> > this afternoon, Thomas has posted 3 patches for qemu (see > >>> > http://patchwork.ozlabs.org/patch/197055/). > >>> > Alexander, try to rebuild host-qemu with them. > >>> > >>> Unfortunately, none of those patches have a chance to fix > Alexander's > >>> problem. My patches only fix missing dependencies. > >>> > >>> Also, could you have a look at > http://autobuild.buildroot.org/ for perl > >>> build failures? It seems like Qemu doesn't start properly > on some > >>> platforms, for some reason. > >>> > >>> Thomas > >>> -- > >>> Thomas Petazzoni, Free Electrons > >>> Kernel, drivers, real-time and embedded Linux > >>> development, consulting, training and support. > >>> http://free-electrons.com > >> > >> > >> > >> I applied your patch but looks it not helps me. > >> > >> http://pastie.org/5188031 > > > > > > > > Also if i compile it by my default system gcc it's ok > > > > > > [fdkit@kvm-host UU]$ gcc try.c > > [fdkit@kvm-host UU]$ ls ./a.out > > ./a.out* > > [fdkit@kvm-host UU]$ ./a.out > > Ok > > > > Alexander, > > the 'qemu-arm' built by Buildroot doesn't work properly. > could you try this workaround ? > 1) install a 'qemu-arm' with your distro package manager, > $ apt-get install qemu-kvm-extras # or equivalent > 2) apply this patch : > --- a/package/perl/perl.mk <http://perl.mk> > +++ b/package/perl/perl.mk <http://perl.mk> > @@ -22,7 +22,7 @@ endif > > PERL_CONF_OPT = -des \ > -Dusecrosscompile \ > - -Dtargetrun=$(QEMU_USER) \ > + -Dtargetrun=qemu-arm \ > -Dqemulib=$(STAGING_DIR) \ > -Dar="$(TARGET_AR)" \ > -Dcc="$(TARGET_CC)" \ > > François > > > > I migrated my build system to fresh linux installation with 3.5.1 > kernel > Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT > Tue Aug 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > > Applied your patch, and problem still here. > > http://pastie.org/5336882 > > > > > Bump! > I don't know how to solve it. > > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot Hello, Like Bernd mentioned below. Using perlcross makes a successful build of perl. I tried this in buildroot for target arm (AT91SAM9G20) with success. Was able to run Hello World program and perl -V with no problem. The perlcross patch only works for perl-5.16.0 right now. I was thinking on adjusting it for perl-5.16.2. My .configure line is pasted below. I use old version of buildroot so you will need to edit the paths. I followed the instructions here: http://perlcross.berlios.de/ ./configure --target=arm-linux-uclibc \ --target-tools-prefix=/home/ethertek/rms200/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi- \ --prefix=/usr \ --sysroot=/home/ethertek/rms200/buildroot/build_arm/staging_dir/ <Hi, <maybe this can be of help:http://perlcross.berlios.de/ <Kind regards, Bernd Dan Pattison Ethertek Circuits
--- a/package/perl/perl.mk +++ b/package/perl/perl.mk @@ -22,7 +22,7 @@ endif PERL_CONF_OPT = -des \ -Dusecrosscompile \ - -Dtargetrun=$(QEMU_USER) \ + -Dtargetrun=qemu-arm \ -Dqemulib=$(STAGING_DIR) \ -Dar="$(TARGET_AR)" \ -Dcc="$(TARGET_CC)" \