@@ -2667,9 +2667,11 @@ F: package/vnstat/
N: Romain Naour <romain.naour@gmail.com>
F: board/qemu/
+F: board/librecomputer/lepotato/
F: board/ti/am574x-idk/
F: configs/qemu_*
F: configs/am574x_idk_defconfig
+F: configs/lepotato_defconfig
F: package/alure/
F: package/aubio/
F: package/binutils/
new file mode 100644
@@ -0,0 +1,4 @@
+label linux
+ kernel /Image
+ devicetree /meson-gxl-s905x-libretech-cc.dtb
+ append console=ttyAML0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
new file mode 100644
@@ -0,0 +1,33 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "meson-gxl-s905x-libretech-cc.dtb",
+ "extlinux"
+ }
+
+ label = "boot"
+ }
+
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image="boot.vfat"
+ size = 64M
+ offset = 2M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ size = 128M
+ offset = 0
+ }
+}
new file mode 100755
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf
new file mode 100755
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+support/scripts/genimage.sh -c "${BOARD_DIR}/genimage.cfg"
+
+AMLOGIC_DIR=${BINARIES_DIR}/amlogic-boot-fip
+FIP_DIR=${BINARIES_DIR}/fip
+
+mkdir -p "${FIP_DIR}"
+
+(cd "${AMLOGIC_DIR}" && \
+ ./build-fip.sh lepotato \
+ "${BINARIES_DIR}"/u-boot.bin \
+ "${FIP_DIR}")
+
+dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
+ of="${BINARIES_DIR}"/sdcard.img \
+ conv=fsync,notrunc bs=1 count=444
+
+dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
+ of="${BINARIES_DIR}"/sdcard.img \
+ conv=fsync,notrunc bs=512 skip=1 seek=1
new file mode 100644
@@ -0,0 +1,82 @@
+Libre Computer Le Potato (AML-S905X-CC)
+
+Intro
+=====
+
+Libre Computer "Le Potato" is a low cost SBC based around an Amlogic
+s905x SoC (quad A53), 2GB DDR3, Mali-450:
+
+https://libre.computer/products/aml-s905x-cc/
+
+How to build it
+===============
+
+Configure Buildroot:
+
+ $ make lepotato_defconfig
+
+Then you can edit the build options using
+
+ $ make menuconfig
+
+Compile everything and build rootfs image:
+
+ $ make
+
+Note: you will need to have access to the network, since Buildroot
+will download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+output/images/
++-- amlogic-boot-fip
++ +-- axg.inc
++ +-- build-fip.sh
++ +-- g12a.inc
++ +-- gxbb.inc
++ +-- gxl.inc
++ `-- lepotato
++ +-- acs.bin
++ +-- acs_tool.py
++ +-- aml_encrypt_gxl
++ +-- bl21.bin
++ +-- bl2.bin
++ +-- bl301.bin
++ +-- bl30.bin
++ +-- bl31.img
++ +-- blx_fix.sh
++ `-- Makefile
++-- boot.vfat
++-- extlinux
++ `-- extlinux.conf
++-- fip
++ +-- u-boot.bin
++ +-- u-boot.bin.sd.bin
++ +-- u-boot.bin.usb.bl2
++ `-- u-boot.bin.usb.tpl
++-- Image
++-- meson-gxl-s905x-libretech-cc.dtb
++-- rootfs.ext2
++-- rootfs.ext4 -> rootfs.ext2
++-- rootfs.tar
++-- sdcard.img
+`-- u-boot.bin
+
+The post-image script uses the files in the amlogic-boot-fip folder to sign
+the bootloader image before integrating it into the sdcard image.
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the micro SDcard into your Le Potato and power it up. The console
+is on the serial line, 115200 8N1.
new file mode 100644
@@ -0,0 +1,50 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Image
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/librecomputer/lepotato/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/librecomputer/lepotato/post-image.sh"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.17"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-gxl-s905x-libretech-cc"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# For kernel modules autoloading
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+
+# System
+BR2_SYSTEM_DHCP="eth0"
+
+# Linux headers same as kernel, a 6.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="libretech-cc"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+
+# Required tool to sign the bootloader image
+BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP=y
+BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE="lepotato"
+
+# Required tools to create the SD image
+BR2_PACKAGE_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
Add basic support for the Libre Computer "Le Potato" SBC. https://libre.computer/products/aml-s905x-cc Signed-off-by: Romain Naour <romain.naour@smile.fr> --- DEVELOPERS | 2 + board/librecomputer/lepotato/extlinux.conf | 4 ++ board/librecomputer/lepotato/genimage.cfg | 33 +++++++++ board/librecomputer/lepotato/post-build.sh | 5 ++ board/librecomputer/lepotato/post-image.sh | 23 ++++++ board/librecomputer/lepotato/readme.txt | 82 ++++++++++++++++++++++ configs/lepotato_defconfig | 50 +++++++++++++ 7 files changed, 199 insertions(+) create mode 100644 board/librecomputer/lepotato/extlinux.conf create mode 100644 board/librecomputer/lepotato/genimage.cfg create mode 100755 board/librecomputer/lepotato/post-build.sh create mode 100755 board/librecomputer/lepotato/post-image.sh create mode 100644 board/librecomputer/lepotato/readme.txt create mode 100644 configs/lepotato_defconfig