diff mbox series

[v6,07/10] configs/zynqmp*: build pmufw source

Message ID 20231020114236.4129636-7-neal.frager@amd.com
State Changes Requested
Headers show
Series [v6,01/10] package/binutils-bare-metal: new package | expand

Commit Message

Neal Frager Oct. 20, 2023, 11:42 a.m. UTC 
This patch migrates the zynqmp config files to use the new
zynqmp-firmware package for building the zynqmp pmufw from source.

Signed-off-by: Neal Frager <neal.frager@amd.com>
---
V4->V6:
 - no changes
---
 configs/zynqmp_kria_kv260_defconfig | 4 +++-
 configs/zynqmp_zcu102_defconfig     | 3 ++-
 configs/zynqmp_zcu106_defconfig     | 3 ++-
 3 files changed, 7 insertions(+), 3 deletions(-)

Comments

Luca Ceresoli Oct. 26, 2023, 4:07 p.m. UTC | #1 
On Fri, 20 Oct 2023 12:42:33 +0100
Neal Frager <neal.frager@amd.com> wrote:

> This patch migrates the zynqmp config files to use the new
> zynqmp-firmware package for building the zynqmp pmufw from source.
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>

[Tested on Kria KV260 starter kit]
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
diff mbox series

Patch

diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig
index 78b62a9ff8..5e0c820ba7 100644
--- a/configs/zynqmp_kria_kv260_defconfig
+++ b/configs/zynqmp_kria_kv260_defconfig
@@ -32,7 +32,9 @@  BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y
-BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2023.1/kv260-kria/pmufw.elf"
+BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
+BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2023.1"
+BR2_TARGET_ZYNQMP_FIRMWARE_CUSTOM_CFLAGS="-DBOARD_SHUTDOWN_PIN=2 -DBOARD_SHUTDOWN_PIN_STATE=0 -DENABLE_EM -DENABLE_MOD_OVERTEMP -DENABLE_DYNAMIC_MIO_CONFIG -DENABLE_IOCTL -DCONNECT_PMU_GPO_2_VAL=0"
 BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c"
 BR2_TARGET_UBOOT_FORMAT_ITB=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig
index 18230cf89b..6674fc6dfb 100644
--- a/configs/zynqmp_zcu102_defconfig
+++ b/configs/zynqmp_zcu102_defconfig
@@ -30,7 +30,8 @@  BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y
-BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2023.1/zcu102-zynqmp/pmufw.elf"
+BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
+BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2023.1"
 BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c"
 BR2_TARGET_UBOOT_FORMAT_ITB=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
index 21f41a2d8f..201d3daeda 100644
--- a/configs/zynqmp_zcu106_defconfig
+++ b/configs/zynqmp_zcu106_defconfig
@@ -30,7 +30,8 @@  BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
 BR2_TARGET_UBOOT_ZYNQMP=y
-BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2023.1/zcu106-zynqmp/pmufw.elf"
+BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
+BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2023.1"
 BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c"
 BR2_TARGET_UBOOT_FORMAT_ITB=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y