Message ID | 20230916104655.1855916-1-m.niestroj@grinn-global.com |
---|---|
State | Superseded |
Headers | show |
Series | board: add Orangepi Zero3 support | expand |
Hello, Marcin Niestroj. Networking does not work with this kernel configuration. I suggest using the "linux_sunxi64" configuration. 16.09.2023 13:46, Marcin Niestroj пишет: > Add initial support for Orangepi Zero3 board: > - U-Boot 2021.07 fork by Orangepi > - Linux 6.1.31 fork by Orangepi > - Default packages from buildroot > > Enable CONFIG_MFD_AC200 as it is used directly by other module, > resulting in build failure when disabled. > > Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> > --- > board/orangepi/orangepi-zero3/linux.config | 1 + > board/orangepi/orangepi-zero3/readme.txt | 34 +++++++++++++ > configs/orangepi_zero3_defconfig | 56 ++++++++++++++++++++++ > 3 files changed, 91 insertions(+) > create mode 100644 board/orangepi/orangepi-zero3/linux.config > create mode 100644 board/orangepi/orangepi-zero3/readme.txt > create mode 100644 configs/orangepi_zero3_defconfig > > diff --git a/board/orangepi/orangepi-zero3/linux.config b/board/orangepi/orangepi-zero3/linux.config > new file mode 100644 > index 0000000000..09b7a93a5a > --- /dev/null > +++ b/board/orangepi/orangepi-zero3/linux.config > @@ -0,0 +1 @@ > +CONFIG_MFD_AC200=y > diff --git a/board/orangepi/orangepi-zero3/readme.txt b/board/orangepi/orangepi-zero3/readme.txt > new file mode 100644 > index 0000000000..4872a363e7 > --- /dev/null > +++ b/board/orangepi/orangepi-zero3/readme.txt > @@ -0,0 +1,34 @@ > +Intro > +===== > + > +This default configuration will allow you to start experimenting with the > +buildroot environment for the Orangepi Zero3. With the current configuration > +it will bring-up the board, and allow access through the serial console. > + > +Orangepi Zero3 link: > +http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html > + > +This configuration uses Orangepi's fork of U-Boot and Linux kernel. > + > +How to build > +============ > + > + $ make orangepi_zero3_defconfig > + $ make > + > +Note: you will need access to the internet to download the required > +sources. > + > +How to write the SD card > +======================== > + > +Once the build process is finished you will have an image called "sdcard.img" > +in the output/images/ directory. > + > +Copy the bootable "sdcard.img" onto an SD card with "dd": > + > + $ sudo dd if=output/images/sdcard.img of=/dev/sdX > + $ sudo sync > + > +Insert the micro SDcard in your Orangepi Zero3 and power it up. The console > +is on the serial line, 115200 8N1. > diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig > new file mode 100644 > index 0000000000..e88e4a9fd8 > --- /dev/null > +++ b/configs/orangepi_zero3_defconfig > @@ -0,0 +1,56 @@ > +BR2_aarch64=y > +BR2_cortex_a53=y > +BR2_ARM_FPU_VFPV4=y > + > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y > +BR2_SYSTEM_DHCP="eth0" > + > +# Firmware > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h616" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > + > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,u-boot-orangepi,6fe17fac388aad17490cf386578b7532975e567f)/u-boot-orangepi-6fe17fac388aad17490cf386578b7532975e567f.tar.gz" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero3" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" > +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" > + > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,linux-orangepi,3495b5ee0594566c9fed930b96b1cae90600412e)/linux-orangepi-3495b5ee0594566c9fed930b96b1cae90600412e.tar.gz" You need to replace the line: > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DEFCONFIG="linux_sunxi64" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h616-orangepi-zero3" > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y > +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero3/linux.config" > + > +# Filesystem > +BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3" > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y It is necessary to increase the size of the rootfs, because the kernel size has become larger: > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ROOTFS_EXT2_SIZE="200M" You need to add this line to avoid creating a tar archive: # BR2_TARGET_ROOTFS_TAR is not set > + > +# host tools > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS=y > + > +# image scripts > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
Hi Sergey, Sergey Kuzminov <kuzminov.sergey81@gmail.com> writes: > Hello, Marcin Niestroj. > Networking does not work with this kernel configuration. I suggest using the > "linux_sunxi64" configuration. > > 16.09.2023 13:46, Marcin Niestroj пишет: >> Add initial support for Orangepi Zero3 board: >> - U-Boot 2021.07 fork by Orangepi >> - Linux 6.1.31 fork by Orangepi >> - Default packages from buildroot >> Enable CONFIG_MFD_AC200 as it is used directly by other module, >> resulting in build failure when disabled. >> Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> >> --- >> board/orangepi/orangepi-zero3/linux.config | 1 + >> board/orangepi/orangepi-zero3/readme.txt | 34 +++++++++++++ >> configs/orangepi_zero3_defconfig | 56 ++++++++++++++++++++++ >> 3 files changed, 91 insertions(+) >> create mode 100644 board/orangepi/orangepi-zero3/linux.config >> create mode 100644 board/orangepi/orangepi-zero3/readme.txt >> create mode 100644 configs/orangepi_zero3_defconfig >> [...snip...] >> diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig >> new file mode 100644 >> index 0000000000..e88e4a9fd8 >> --- /dev/null >> +++ b/configs/orangepi_zero3_defconfig >> @@ -0,0 +1,56 @@ >> [...snip...] >> + >> +# Kernel >> +BR2_LINUX_KERNEL=y >> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y >> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,linux-orangepi,3495b5ee0594566c9fed930b96b1cae90600412e)/linux-orangepi-3495b5ee0594566c9fed930b96b1cae90600412e.tar.gz" > > You need to replace the line: >> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > BR2_LINUX_KERNEL_DEFCONFIG="linux_sunxi64" > >> +BR2_LINUX_KERNEL_DTS_SUPPORT=y >> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h616-orangepi-zero3" >> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y >> +BR2_LINUX_KERNEL_INSTALL_TARGET=y >> +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y >> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero3/linux.config" >> + >> +# Filesystem >> +BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3" >> +BR2_TARGET_ROOTFS_EXT2=y >> +BR2_TARGET_ROOTFS_EXT2_4=y > > It is necessary to increase the size of the rootfs, because the kernel size has > become larger: >> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > BR2_TARGET_ROOTFS_EXT2_SIZE="200M" > > You need to add this line to avoid creating a tar archive: > # BR2_TARGET_ROOTFS_TAR is not set > >> + >> +# host tools >> +BR2_PACKAGE_HOST_GENIMAGE=y >> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y >> + >> +# image scripts >> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh" >> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" >> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" Thanks for suggestions! Applied them and already sent v2 of this patch. -- Marcin Niestrój
diff --git a/board/orangepi/orangepi-zero3/linux.config b/board/orangepi/orangepi-zero3/linux.config new file mode 100644 index 0000000000..09b7a93a5a --- /dev/null +++ b/board/orangepi/orangepi-zero3/linux.config @@ -0,0 +1 @@ +CONFIG_MFD_AC200=y diff --git a/board/orangepi/orangepi-zero3/readme.txt b/board/orangepi/orangepi-zero3/readme.txt new file mode 100644 index 0000000000..4872a363e7 --- /dev/null +++ b/board/orangepi/orangepi-zero3/readme.txt @@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Orangepi Zero3. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Orangepi Zero3 link: +http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html + +This configuration uses Orangepi's fork of U-Boot and Linux kernel. + +How to build +============ + + $ make orangepi_zero3_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Orangepi Zero3 and power it up. The console +is on the serial line, 115200 8N1. diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig new file mode 100644 index 0000000000..e88e4a9fd8 --- /dev/null +++ b/configs/orangepi_zero3_defconfig @@ -0,0 +1,56 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_SYSTEM_DHCP="eth0" + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h616" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,u-boot-orangepi,6fe17fac388aad17490cf386578b7532975e567f)/u-boot-orangepi-6fe17fac388aad17490cf386578b7532975e567f.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero3" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,linux-orangepi,3495b5ee0594566c9fed930b96b1cae90600412e)/linux-orangepi-3495b5ee0594566c9fed930b96b1cae90600412e.tar.gz" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h616-orangepi-zero3" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero3/linux.config" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" + +# host tools +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y + +# image scripts +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
Add initial support for Orangepi Zero3 board: - U-Boot 2021.07 fork by Orangepi - Linux 6.1.31 fork by Orangepi - Default packages from buildroot Enable CONFIG_MFD_AC200 as it is used directly by other module, resulting in build failure when disabled. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> --- board/orangepi/orangepi-zero3/linux.config | 1 + board/orangepi/orangepi-zero3/readme.txt | 34 +++++++++++++ configs/orangepi_zero3_defconfig | 56 ++++++++++++++++++++++ 3 files changed, 91 insertions(+) create mode 100644 board/orangepi/orangepi-zero3/linux.config create mode 100644 board/orangepi/orangepi-zero3/readme.txt create mode 100644 configs/orangepi_zero3_defconfig