diff --git a/package/erlang/0001-erts-ethread-instruct-libatomic_ops-we-do-require-CA.patch b/package/erlang/0001-erts-ethread-instruct-libatomic_ops-we-do-require-CA.patch
deleted file mode 100644
index 8e401430fe..0000000000
--- a/package/erlang/0001-erts-ethread-instruct-libatomic_ops-we-do-require-CA.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 439fa2eae78a8900bda120072335be19d626498c Mon Sep 17 00:00:00 2001
-From: "Yann E. MORIN" <yann.morin.1998@free.fr>
-Date: Sun, 28 Dec 2014 23:39:40 +0100
-Subject: [PATCH] erts/ethread: instruct libatomic_ops we do require CAS
-
-We do require compare-and-swap (CAS), so we must instruct libatomic_ops
-to provide it, even if the architecture does not have instructions for
-it.
-
-For example, on ARM, LDREX is required for fast CAS. But LDREX is only
-available on ARMv6, so by default libatomic_ops will not have CAS for
-anything below, like ARMv5. But ARMv5 is always UP, so using an
-emulated CAS (that is signal-asyn-safe) is still possible (albeit much
-slower).
-
-Tell libatomic_ops to provide CAS, even if the hardware is not capable
-of it, by using emulated CAS, as per libatomic_ops dosc:
-    https://github.com/ivmai/libatomic_ops/blob/master/doc/README.txt#L28
-
-    If this is included after defining AO_REQUIRE_CAS, then the package
-    will make an attempt to emulate compare-and-swap in a way that (at
-    least on Linux) should still be async-signal-safe.
-
-Thanks go to Thomas for all this insight! :-)
-Thanks go to Frank for reporting the issue! :-)
-
-Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
-Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Cc: Frank Hunleth <fhunleth@troodon-software.com>
----
- erts/include/internal/libatomic_ops/ethread.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/erts/include/internal/libatomic_ops/ethread.h b/erts/include/internal/libatomic_ops/ethread.h
-index d65ee19..71d3598 100644
---- a/erts/include/internal/libatomic_ops/ethread.h
-+++ b/erts/include/internal/libatomic_ops/ethread.h
-@@ -35,6 +35,7 @@
- 
- #define ETHR_NATIVE_IMPL__ "libatomic_ops"
- 
-+#define AO_REQUIRE_CAS
- #include "atomic_ops.h"
- #include "ethr_membar.h"
- #include "ethr_atomic.h"
-diff --git a/erts/aclocal.m4 b/erts/aclocal.m4
-index d65ee19..71d3598 100644
---- a/erts/aclocal.m4
-+++ b/erts/aclocal.m4
-@@ -1414,7 +1414,8 @@
- 	    	    fi;;
- 	    esac
- 	    ethr_have_libatomic_ops=no
--	    AC_TRY_LINK([#include "atomic_ops.h"],
-+	    AC_TRY_LINK([#define AO_REQUIRE_CAS
-+                    #include "atomic_ops.h"],
- 	    	        [
- 	    	    	    volatile AO_t x;
- 	    	    	    AO_t y;
-@@ -1455,6 +1455,7 @@
- 	        AC_CHECK_SIZEOF(AO_t, ,
- 	    	    	        [
- 	    	    	    	    #include <stdio.h>
-+	    	    	    	    #define AO_REQUIRE_CAS
- 	    	    	    	    #include "atomic_ops.h"
- 	    	    	        ])
- 	        AC_DEFINE_UNQUOTED(ETHR_SIZEOF_AO_T, $ac_cv_sizeof_AO_t, [Define to the size of AO_t if libatomic_ops is used])
--- 
-1.9.1
-
diff --git a/package/erlang/0002-erts-emulator-reorder-inclued-headers-paths.patch b/package/erlang/0002-erts-emulator-reorder-inclued-headers-paths.patch
deleted file mode 100644
index 7a6e469dff..0000000000
--- a/package/erlang/0002-erts-emulator-reorder-inclued-headers-paths.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 85a3e5b4f65e5284e59dcdd90e92ea7d50ef6907 Mon Sep 17 00:00:00 2001
-From: Romain Naour <romain.naour@openwide.fr>
-Date: Sun, 8 Feb 2015 17:23:13 +0100
-Subject: [PATCH] erts/emulator: reorder inclued headers paths
-
-If the Perl Compatible Regular Expressions is installed on the
-host and the path to the headers is added to the CFLAGS, the
-pcre.h from the host is used instead of the one provided by
-erlang.
-
-Erlang use an old version of this file which is incompatible
-with the upstream one.
-
-Move INCLUDES before CFLAGS to use pcre.h from erlang.
-
-http://autobuild.buildroot.net/results/cbd/cbd8b54eef535f19d7d400fd269af1b3571d6143/build-end.log
-
-Signed-off-by: Romain Naour <romain.naour@openwide.fr>
-[Bernd: rebased for erlang-21.0]
-Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
----
- erts/emulator/Makefile.in | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/erts/emulator/Makefile.in b/erts/emulator/Makefile.in
-index 7145824..d079487 100644
---- a/erts/emulator/Makefile.in
-+++ b/erts/emulator/Makefile.in
-@@ -712,7 +712,7 @@
- # Usually the same as the default rule, but certain platforms (e.g. win32) mix
- # different compilers
- $(OBJDIR)/beam_emu.o: beam/beam_emu.c
--	$(V_EMU_CC) $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) $(INCLUDES) -c $< -o $@
-+	$(V_EMU_CC) $(INCLUDES) $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) -c $< -o $@
- 
- $(OBJDIR)/beam_emu.S: beam/beam_emu.c
- 	$(V_EMU_CC) -S -fverbose-asm $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) $(INCLUDES) -c $< -o $@
-@@ -765,7 +765,7 @@
- # General targets
- #
- $(OBJDIR)/%.o: beam/%.c
--	$(V_CC) $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) $(INCLUDES) -c $< -o $@
-+	$(V_CC) $(INCLUDES) $(subst -O2, $(GEN_OPT_FLGS), $(CFLAGS)) -c $< -o $@
- 
- $(OBJDIR)/%.o: $(TARGET)/%.c
- 	$(V_CC) $(CFLAGS) $(INCLUDES) -Idrivers/common -c $< -o $@
diff --git a/package/erlang/0003-crypto-Fixes-for-LibreSSL-3-5-0.patch b/package/erlang/0003-crypto-Fixes-for-LibreSSL-3-5-0.patch
deleted file mode 100644
index 84c75fef83..0000000000
--- a/package/erlang/0003-crypto-Fixes-for-LibreSSL-3-5-0.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 8e5170d79e387d7e898d948a78e0c70407a4030c Mon Sep 17 00:00:00 2001
-From: Hans Nilsson <hans@erlang.org>
-Date: Mon, 14 Feb 2022 15:51:35 +0100
-Subject: [PATCH] crypto: Fixes for LibreSSL 3.5.0
-
-[Retrieved (and backported) from:
-https://github.com/erlang/otp/commit/8e5170d79e387d7e898d948a78e0c70407a4030c]
-Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
----
- lib/crypto/c_src/openssl_config.h | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/lib/crypto/c_src/openssl_config.h b/lib/crypto/c_src/openssl_config.h
-index 6fdd049fb30a..39e4b2d9d7c0 100644
---- a/lib/crypto/c_src/openssl_config.h
-+++ b/lib/crypto/c_src/openssl_config.h
-@@ -122,7 +122,14 @@
- # endif
- #endif
- 
-+#ifdef HAS_LIBRESSL
-+# if LIBRESSL_VERSION_NUMBER >= 0x3050000fL
-+#  define HAS_EVP_PKEY_CTX
-+#  define HAVE_EVP_CIPHER_CTX_COPY
-+# endif
-+#endif
-+
- #ifndef HAS_LIBRESSL
- # if OPENSSL_VERSION_NUMBER >= PACKED_OPENSSL_VERSION_PLAIN(1,0,0)
- #  define HAS_EVP_PKEY_CTX
diff --git a/package/erlang/erlang.hash b/package/erlang/erlang.hash
index 338545a0ba..9fc5a6eabf 100644
--- a/package/erlang/erlang.hash
+++ b/package/erlang/erlang.hash
@@ -1,5 +1,5 @@
-# From https://github.com/erlang/otp/releases/download/OTP-22.3.4.22/SHA256.txt
-sha256  e7f0793e62f8da4f7551dc9c1c0de76c40f19773ba516121fc56315c840f60cc  otp_src_22.3.4.22.tar.gz
+# From https://github.com/erlang/otp/releases/download/OTP-26.0.2/SHA256.txt
+sha256  47853ea9230643a0a31004433f07a71c1b92d6e0094534f629e3b75dbc62f193  otp_src_26.0.2.tar.gz
 
 # Hash for license file
 sha256  809fa1ed21450f59827d1e9aec720bbc4b687434fa22283c6cb5dd82a47ab9c0  LICENSE.txt
diff --git a/package/erlang/erlang.mk b/package/erlang/erlang.mk
index ac2c204a49..71cca737a3 100644
--- a/package/erlang/erlang.mk
+++ b/package/erlang/erlang.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 # See note below when updating Erlang
-ERLANG_VERSION = 22.3.4.22
+ERLANG_VERSION = 26.0.2
 ERLANG_SITE = \
 	https://github.com/erlang/otp/releases/download/OTP-$(ERLANG_VERSION)
 ERLANG_SOURCE = otp_src_$(ERLANG_VERSION).tar.gz
@@ -27,18 +27,9 @@ define ERLANG_REMOVE_SSL_DEPS
 endef
 ERLANG_POST_PATCH_HOOKS += ERLANG_REMOVE_SSL_DEPS
 
-# Patched erts/aclocal.m4
-define ERLANG_RUN_AUTOCONF
-	cd $(@D) && PATH=$(BR_PATH) ./otp_build autoconf
-endef
-ERLANG_DEPENDENCIES += host-autoconf
-ERLANG_PRE_CONFIGURE_HOOKS += ERLANG_RUN_AUTOCONF
-HOST_ERLANG_DEPENDENCIES += host-autoconf
-HOST_ERLANG_PRE_CONFIGURE_HOOKS += ERLANG_RUN_AUTOCONF
-
 # Whenever updating Erlang, this value should be updated as well, to the
 # value of EI_VSN in the file lib/erl_interface/vsn.mk
-ERLANG_EI_VSN = 3.13.2.2
+ERLANG_EI_VSN = 5.4
 
 # The configure checks for these functions fail incorrectly
 ERLANG_CONF_ENV = ac_cv_func_isnan=yes ac_cv_func_isinf=yes
