| Message ID | 20230709024508.236859-1-flavio.tapajos@newtesc.com.br |
|---|---|
| State | Superseded |
| Headers | show |
| Series | configs: asus_tinker-s_rk3288: new config for the "S" variant of the Tinkerboard | expand |
Hi Flávio, On 09/07/23 04:45, Flávio Tapajós wrote: > This commit duplicates the asus_tinker_rk3288_defconfig changing: > > - BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s > - BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288 > - extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb > - root device format to <major>:<minor> in order to prevent the kernel to mount rootfs > from the wrong device > > Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br> > --- > board/asus/tinker-s/extlinux.conf | 4 +++ > board/asus/tinker-s/post-build.sh | 9 +++++ > board/asus/tinker-s/readme.txt | 43 ++++++++++++++++++++++++ > configs/asus_tinker-s_rk3288_defconfig | 46 ++++++++++++++++++++++++++ > 4 files changed, 102 insertions(+) > create mode 100644 board/asus/tinker-s/extlinux.conf > create mode 100755 board/asus/tinker-s/post-build.sh > create mode 100644 board/asus/tinker-s/readme.txt > create mode 100644 configs/asus_tinker-s_rk3288_defconfig > > diff --git a/board/asus/tinker-s/extlinux.conf b/board/asus/tinker-s/extlinux.conf > new file mode 100644 > index 0000000000..5a2d05b811 > --- /dev/null > +++ b/board/asus/tinker-s/extlinux.conf > @@ -0,0 +1,4 @@ > +label Tinker linux > + kernel /boot/uImage > + devicetree /boot/rk3288-tinker-s.dtb > + append console=ttyS2,115200n8 root=179:1 rootwait > diff --git a/board/asus/tinker-s/post-build.sh b/board/asus/tinker-s/post-build.sh > new file mode 100755 > index 0000000000..ffbbcdeb58 > --- /dev/null > +++ b/board/asus/tinker-s/post-build.sh > @@ -0,0 +1,9 @@ > +#!/bin/sh > + > +MKIMAGE=$HOST_DIR/bin/mkimage > +BOARD_DIR="$(dirname $0)" > + > +$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img > +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img > + > +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf > diff --git a/board/asus/tinker-s/readme.txt b/board/asus/tinker-s/readme.txt > new file mode 100644 > index 0000000000..3dffa12b45 > --- /dev/null > +++ b/board/asus/tinker-s/readme.txt > @@ -0,0 +1,43 @@ > +Tinker S RK3288 > +============= > + > +Tinker Board is a Single Board Computer (SBC) in an ultra-small form > +factor that offers class-leading performance while leveraging outstanding > +mechanical compatibility. The "S" variant of the Tinker Board has eMMC > + > +Tinker link: > +https://www.asus.com/br/motherboards-components/single-board-computer/all-series/tinker-board-s/ > + > +Wiki link: > +https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288 > + > +How to build it > +=============== > + > + $ make asus_tinker-s_rk3288_defconfig > + > +Then you can edit the build options using > + > + $ make menuconfig > + > +Compile all and build rootfs image: > + > + $ make > + > +Prepare your SDCard > +=================== > + > +Buildroot generates a ready-to-use SD card image that you can flash directly to > +the card. The image will be in output/images/sdcard.img. > +You can write this image directly to an SD card device (i.e. /dev/xxx): > + > + $ sudo dd if=output/images/sdcard.img of=/dev/xxx > + $ sudo sync > + > +Finally, you can insert the SD card to the Tinker RK3288 board and boot it. > + > +NOTE: > +USB power supply requires more than the standard 500mA USB current, so > +this board must be supplied from a capable port or from an external > +AC/DC adapter. Otherwise it will hang forever while loading the kernel > +image. > diff --git a/configs/asus_tinker-s_rk3288_defconfig b/configs/asus_tinker-s_rk3288_defconfig > new file mode 100644 > index 0000000000..291333f2da > --- /dev/null > +++ b/configs/asus_tinker-s_rk3288_defconfig > @@ -0,0 +1,46 @@ > +# Architecture > +BR2_arm=y > +BR2_cortex_a17=y > +BR2_ARM_FPU_NEON_VFPV4=y > + > +# Linux headers same as kernel, a 6.1 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y > + > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" could you give a try with latest uboot 2023.04? > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="tinker-s-rk3288" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin" > + > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.2" please use latest stable linux 6.1.38 and test it with uboot latest stable version > +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" > +BR2_LINUX_KERNEL_UIMAGE=y > +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker-s" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > + > +# Filesystem > +BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288-s" > +BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER S RK3288!" > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="512M" > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg" > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker-s/post-build.sh" please add an entry to DEVELOPERS file pointing you as maintainer of this board. Thank you! Best regards
diff --git a/board/asus/tinker-s/extlinux.conf b/board/asus/tinker-s/extlinux.conf new file mode 100644 index 0000000000..5a2d05b811 --- /dev/null +++ b/board/asus/tinker-s/extlinux.conf @@ -0,0 +1,4 @@ +label Tinker linux + kernel /boot/uImage + devicetree /boot/rk3288-tinker-s.dtb + append console=ttyS2,115200n8 root=179:1 rootwait diff --git a/board/asus/tinker-s/post-build.sh b/board/asus/tinker-s/post-build.sh new file mode 100755 index 0000000000..ffbbcdeb58 --- /dev/null +++ b/board/asus/tinker-s/post-build.sh @@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/asus/tinker-s/readme.txt b/board/asus/tinker-s/readme.txt new file mode 100644 index 0000000000..3dffa12b45 --- /dev/null +++ b/board/asus/tinker-s/readme.txt @@ -0,0 +1,43 @@ +Tinker S RK3288 +============= + +Tinker Board is a Single Board Computer (SBC) in an ultra-small form +factor that offers class-leading performance while leveraging outstanding +mechanical compatibility. The "S" variant of the Tinker Board has eMMC + +Tinker link: +https://www.asus.com/br/motherboards-components/single-board-computer/all-series/tinker-board-s/ + +Wiki link: +https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288 + +How to build it +=============== + + $ make asus_tinker-s_rk3288_defconfig + +Then you can edit the build options using + + $ make menuconfig + +Compile all and build rootfs image: + + $ make + +Prepare your SDCard +=================== + +Buildroot generates a ready-to-use SD card image that you can flash directly to +the card. The image will be in output/images/sdcard.img. +You can write this image directly to an SD card device (i.e. /dev/xxx): + + $ sudo dd if=output/images/sdcard.img of=/dev/xxx + $ sudo sync + +Finally, you can insert the SD card to the Tinker RK3288 board and boot it. + +NOTE: +USB power supply requires more than the standard 500mA USB current, so +this board must be supplied from a capable port or from an external +AC/DC adapter. Otherwise it will hang forever while loading the kernel +image. diff --git a/configs/asus_tinker-s_rk3288_defconfig b/configs/asus_tinker-s_rk3288_defconfig new file mode 100644 index 0000000000..291333f2da --- /dev/null +++ b/configs/asus_tinker-s_rk3288_defconfig @@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 6.1 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="tinker-s-rk3288" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.2" +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker-s" +BR2_LINUX_KERNEL_INSTALL_TARGET=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288-s" +BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER S RK3288!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="512M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker-s/post-build.sh"
This commit duplicates the asus_tinker_rk3288_defconfig changing: - BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s - BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288 - extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb - root device format to <major>:<minor> in order to prevent the kernel to mount rootfs from the wrong device Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br> --- board/asus/tinker-s/extlinux.conf | 4 +++ board/asus/tinker-s/post-build.sh | 9 +++++ board/asus/tinker-s/readme.txt | 43 ++++++++++++++++++++++++ configs/asus_tinker-s_rk3288_defconfig | 46 ++++++++++++++++++++++++++ 4 files changed, 102 insertions(+) create mode 100644 board/asus/tinker-s/extlinux.conf create mode 100755 board/asus/tinker-s/post-build.sh create mode 100644 board/asus/tinker-s/readme.txt create mode 100644 configs/asus_tinker-s_rk3288_defconfig