| Message ID | 20221117001511.1753592-2-gadiyar@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add support for TI's AM64x boards | expand |
Le jeu. 17 nov. 2022 à 01:16, Anand Gadiyar via buildroot < buildroot@buildroot.org> a écrit : > From: Xuanhao Shi <x-shi@ti.com> > > This is a separate U-Boot package that would build > the intermediate spl binary for the R5 core on TI's k3 boards. > Usually, the resulting spl will be used for k3-image-gen > to build the full R5 boot binary tiboot3.bin. > > Signed-off-by: Xuanhao Shi <x-shi@ti.com> > Signed-off-by: Anand Gadiyar <gadiyar@ti.com> > Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > Acked-by: Andrew Davis <afd@ti.com> > Cc: Romain Naour <romain.naour@gmail.com> > Cc: Bryan Brattlof <bb@ti.com> > --- > DEVELOPERS | 6 +++ > boot/Config.in | 1 + > boot/ti-k3-r5-loader/Config.in | 32 +++++++++++++++ > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 + > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 49 +++++++++++++++++++++++ > 5 files changed, 90 insertions(+) > create mode 100644 boot/ti-k3-r5-loader/Config.in > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > create mode 100644 boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > > diff --git a/DEVELOPERS b/DEVELOPERS > index bc026da4aa..cf1cb8808b 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -128,6 +128,9 @@ F: package/dcron/ > F: package/libxmlrpc/ > F: package/python-docopt/ > > +N: Anand Gadiyar <gadiyar@ti.com> > +F: boot/ti-k3-r5-loader/ > + > N: André Zwing <nerv@dawncrow.de> > F: package/libkrb5/ > F: package/openal/ > @@ -3045,6 +3048,9 @@ F: package/python-pyusb/ > N: Wojciech Niziński <niziak@spox.org> > F: package/fwup/ > > +N: Xuanhao Shi <X15000177@gmail.com> > +F: boot/ti-k3-r5-loader/ > + > N: Yair Ben Avraham <yairba@protonmail.com> > F: package/casync/ > F: package/gloox/ > diff --git a/boot/Config.in b/boot/Config.in > index 40472ae07d..ce17b2df6b 100644 > --- a/boot/Config.in > +++ b/boot/Config.in > @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" > source "boot/shim/Config.in" > source "boot/sun20i-d1-spl/Config.in" > source "boot/syslinux/Config.in" > +source "boot/ti-k3-r5-loader/Config.in" > source "boot/uboot/Config.in" > source "boot/vexpress-firmware/Config.in" > > diff --git a/boot/ti-k3-r5-loader/Config.in > b/boot/ti-k3-r5-loader/Config.in > new file mode 100644 > index 0000000000..bb6140f8a6 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/Config.in > @@ -0,0 +1,32 @@ > +config BR2_TARGET_TI_K3_R5_LOADER > + bool "ti-k3-r5-loader" > + help > + Separate U-Boot build for R5 cores on TI's k3 boards. > + Usually used to build tiboot3.bin with k3-image-gen. > + > +if BR2_TARGET_TI_K3_R5_LOADER > +choice > + prompt "K3 R5 Loader configuration" > + default BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG > + > +config BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG > + bool "Using an in-tree board defconfig file" > + > +config BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG > + bool "Using a custom board (def)config file" > + > +endchoice > + > +config BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG > + string "Board defconfig" > + depends on BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG > + help > + Name of the board for which TI K3 R5 Loader should be > + built, without the _defconfig suffix. > + > +config BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_CONFIG_FILE > + string "Configuration file path" > + depends on BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG > + help > + Path to the TI K3 R5 Loader configuration file. > +endif > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > new file mode 100644 > index 0000000000..fb6ce7c2a6 > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash > @@ -0,0 +1,2 @@ > +# Locally computed: > +sha256 6d69d5e4635cb3fa7852bf15f88ca342ef7740196e71961d3572deb58ba44bea > u-boot-2022.10-rc1.tar.bz2 > diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > new file mode 100644 > index 0000000000..535c9b999b > --- /dev/null > +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk > @@ -0,0 +1,49 @@ > > +################################################################################ > +# > +# ti-k3-r5-loader.mk > +# > > +################################################################################ > + > +TI_K3_R5_LOADER_VERSION = 2022.10 > +TI_K3_R5_LOADER_SITE = https://ftp.denx.de/pub/u-boot > +TI_K3_R5_LOADER_SOURCE = u-boot-$(TI_K3_R5_LOADER_VERSION).tar.bz2 > +TI_K3_R5_LOADER_LICENSE = GPL-2.0+ > +TI_K3_R5_LOADER_LICENSE_FILES = Licenses/gpl-2.0.txt > +TI_K3_R5_LOADER_CPE_ID_VENDOR = denx > +TI_K3_R5_LOADER_CPE_ID_PRODUCT = u-boot > +TI_K3_R5_LOADER_INSTALL_IMAGES = YES > +TI_K3_R5_LOADER_DEPENDENCIES = \ > + host-pkgconf \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + host-arm-gnu-toolchain \ > + host-openssl > + > +TI_K3_R5_LOADER_MAKE = $(BR2_MAKE) > +TI_K3_R5_LOADER_MAKE_ENV = $(TARGET_MAKE_ENV) > +TI_K3_R5_LOADER_KCONFIG_DEPENDENCIES = \ > + host-arm-gnu-toolchain \ > + $(BR2_MAKE_HOST_DEPENDENCY) \ > + $(BR2_BISON_HOST_DEPENDENCY) \ > + $(BR2_FLEX_HOST_DEPENDENCY) > + > +TI_K3_R5_LOADER_BOARD = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD)) > +ifeq ($(BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG),y) > +TI_K3_R5_LOADER_KCONFIG_DEFCONFIG = $(call > qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG))_defconfig > +else ifeq ($(BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG),y) > +TI_K3_R5_LOADER_KCONFIG_FILE = $(call > qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_CONFIG_FILE)) > +endif # BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG > +TI_K3_R5_LOADER_MAKE_OPTS += \ > here `=` is enough, `+=` not needed François > + CROSS_COMPILE=$(HOST_DIR)/bin/arm-none-eabi- \ > + ARCH=arm \ > + HOSTCC="$(HOSTCC) $(subst -I/,-isystem /,$(subst -I /,-isystem > /,$(HOST_CFLAGS)))" \ > + HOSTLDFLAGS="$(HOST_LDFLAGS)" > + > +define TI_K3_R5_LOADER_BUILD_CMDS > + $(TARGET_CONFIGURE_OPTS) $(TI_K3_R5_LOADER_MAKE) -C $(@D) > $(TI_K3_R5_LOADER_MAKE_OPTS) > +endef > + > +define TI_K3_R5_LOADER_INSTALL_IMAGES_CMDS > + cp $(@D)/spl/u-boot-spl.bin $(BINARIES_DIR)/r5-u-boot-spl.bin > +endef > + > +$(eval $(kconfig-package)) > -- > 2.34.1 > > _______________________________________________ > buildroot mailing list > buildroot@buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot >
diff --git a/DEVELOPERS b/DEVELOPERS index bc026da4aa..cf1cb8808b 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -128,6 +128,9 @@ F: package/dcron/ F: package/libxmlrpc/ F: package/python-docopt/ +N: Anand Gadiyar <gadiyar@ti.com> +F: boot/ti-k3-r5-loader/ + N: André Zwing <nerv@dawncrow.de> F: package/libkrb5/ F: package/openal/ @@ -3045,6 +3048,9 @@ F: package/python-pyusb/ N: Wojciech Niziński <niziak@spox.org> F: package/fwup/ +N: Xuanhao Shi <X15000177@gmail.com> +F: boot/ti-k3-r5-loader/ + N: Yair Ben Avraham <yairba@protonmail.com> F: package/casync/ F: package/gloox/ diff --git a/boot/Config.in b/boot/Config.in index 40472ae07d..ce17b2df6b 100644 --- a/boot/Config.in +++ b/boot/Config.in @@ -22,6 +22,7 @@ source "boot/s500-bootloader/Config.in" source "boot/shim/Config.in" source "boot/sun20i-d1-spl/Config.in" source "boot/syslinux/Config.in" +source "boot/ti-k3-r5-loader/Config.in" source "boot/uboot/Config.in" source "boot/vexpress-firmware/Config.in" diff --git a/boot/ti-k3-r5-loader/Config.in b/boot/ti-k3-r5-loader/Config.in new file mode 100644 index 0000000000..bb6140f8a6 --- /dev/null +++ b/boot/ti-k3-r5-loader/Config.in @@ -0,0 +1,32 @@ +config BR2_TARGET_TI_K3_R5_LOADER + bool "ti-k3-r5-loader" + help + Separate U-Boot build for R5 cores on TI's k3 boards. + Usually used to build tiboot3.bin with k3-image-gen. + +if BR2_TARGET_TI_K3_R5_LOADER +choice + prompt "K3 R5 Loader configuration" + default BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG + +config BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG + bool "Using an in-tree board defconfig file" + +config BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG + bool "Using a custom board (def)config file" + +endchoice + +config BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG + string "Board defconfig" + depends on BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG + help + Name of the board for which TI K3 R5 Loader should be + built, without the _defconfig suffix. + +config BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_CONFIG_FILE + string "Configuration file path" + depends on BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG + help + Path to the TI K3 R5 Loader configuration file. +endif diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash new file mode 100644 index 0000000000..fb6ce7c2a6 --- /dev/null +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.hash @@ -0,0 +1,2 @@ +# Locally computed: +sha256 6d69d5e4635cb3fa7852bf15f88ca342ef7740196e71961d3572deb58ba44bea u-boot-2022.10-rc1.tar.bz2 diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk new file mode 100644 index 0000000000..535c9b999b --- /dev/null +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk @@ -0,0 +1,49 @@ +################################################################################ +# +# ti-k3-r5-loader.mk +# +################################################################################ + +TI_K3_R5_LOADER_VERSION = 2022.10 +TI_K3_R5_LOADER_SITE = https://ftp.denx.de/pub/u-boot +TI_K3_R5_LOADER_SOURCE = u-boot-$(TI_K3_R5_LOADER_VERSION).tar.bz2 +TI_K3_R5_LOADER_LICENSE = GPL-2.0+ +TI_K3_R5_LOADER_LICENSE_FILES = Licenses/gpl-2.0.txt +TI_K3_R5_LOADER_CPE_ID_VENDOR = denx +TI_K3_R5_LOADER_CPE_ID_PRODUCT = u-boot +TI_K3_R5_LOADER_INSTALL_IMAGES = YES +TI_K3_R5_LOADER_DEPENDENCIES = \ + host-pkgconf \ + $(BR2_MAKE_HOST_DEPENDENCY) \ + host-arm-gnu-toolchain \ + host-openssl + +TI_K3_R5_LOADER_MAKE = $(BR2_MAKE) +TI_K3_R5_LOADER_MAKE_ENV = $(TARGET_MAKE_ENV) +TI_K3_R5_LOADER_KCONFIG_DEPENDENCIES = \ + host-arm-gnu-toolchain \ + $(BR2_MAKE_HOST_DEPENDENCY) \ + $(BR2_BISON_HOST_DEPENDENCY) \ + $(BR2_FLEX_HOST_DEPENDENCY) + +TI_K3_R5_LOADER_BOARD = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD)) +ifeq ($(BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG),y) +TI_K3_R5_LOADER_KCONFIG_DEFCONFIG = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG))_defconfig +else ifeq ($(BR2_TARGET_TI_K3_R5_LOADER_USE_CUSTOM_CONFIG),y) +TI_K3_R5_LOADER_KCONFIG_FILE = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_CONFIG_FILE)) +endif # BR2_TARGET_TI_K3_R5_LOADER_USE_DEFCONFIG +TI_K3_R5_LOADER_MAKE_OPTS += \ + CROSS_COMPILE=$(HOST_DIR)/bin/arm-none-eabi- \ + ARCH=arm \ + HOSTCC="$(HOSTCC) $(subst -I/,-isystem /,$(subst -I /,-isystem /,$(HOST_CFLAGS)))" \ + HOSTLDFLAGS="$(HOST_LDFLAGS)" + +define TI_K3_R5_LOADER_BUILD_CMDS + $(TARGET_CONFIGURE_OPTS) $(TI_K3_R5_LOADER_MAKE) -C $(@D) $(TI_K3_R5_LOADER_MAKE_OPTS) +endef + +define TI_K3_R5_LOADER_INSTALL_IMAGES_CMDS + cp $(@D)/spl/u-boot-spl.bin $(BINARIES_DIR)/r5-u-boot-spl.bin +endef + +$(eval $(kconfig-package))