@@ -1306,7 +1306,6 @@ F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
-F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
@@ -1321,7 +1320,6 @@ F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
-F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
F: configs/orangepi_zero_plus2_defconfig
F: configs/pine64_defconfig
deleted file mode 100644
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-prime.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
deleted file mode 100644
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-orangepi-prime.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
deleted file mode 100644
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Prime. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Prime link:
-http://www.orangepi.org/OrangePiPrime/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make orangepi_prime_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Orangepi Prime and power it up. The console
-is on the serial line, 115200 8N1.
deleted file mode 100644
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Prime"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-prime/genimage.cfg"
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499141 Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> --- DEVELOPERS | 2 - board/orangepi/orangepi-prime/boot.cmd | 6 --- board/orangepi/orangepi-prime/genimage.cfg | 40 ----------------- board/orangepi/orangepi-prime/readme.txt | 37 ---------------- configs/orangepi_prime_defconfig | 50 ---------------------- 5 files changed, 135 deletions(-) delete mode 100644 board/orangepi/orangepi-prime/boot.cmd delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg delete mode 100644 board/orangepi/orangepi-prime/readme.txt delete mode 100644 configs/orangepi_prime_defconfig