@@ -1783,8 +1783,6 @@ F: package/ti-sgx-km/
F: package/ti-sgx-um/
N: Louis Aussedat <aussedat.louis@gmail.com>
-F: board/friendlyarm/nanopi-neo-plus2/
-F: configs/friendlyarm_nanopi_neo_plus2_defconfig
F: package/mfoc
F: package/libpam-nfc
F: package/python-dnspython/
deleted file mode 100644
@@ -1,4 +0,0 @@
-label linux
- kernel /Image
- devicetree /sun50i-h5-nanopi-neo-plus2.dtb
- append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
deleted file mode 100644
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-nanopi-neo-plus2.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
deleted file mode 100644
@@ -1,10 +0,0 @@
-# wireless core
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_CFG80211_WEXT=y
-
-# wireless drivers
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
deleted file mode 100755
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
deleted file mode 100644
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo-plus2.html
-
-Wiki link:
-http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make friendlyarm_nanopi_neo_plus2_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
-is on the serial line, 115200 8N1.
deleted file mode 100644
@@ -1,53 +0,0 @@
-#AP6212_NVRAM_V1.0.1_20160606
-# 2.4 GHz, 20 MHz BW mode
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0726
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0726
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-xtalfreq=26000
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=90
-txpwrbckof=6
-cckbw202gpo=0x5555
-legofdmbw202gpo=0x77777777
-mcsbw202gpo=0xaaaaaaaa
-
-# OFDM IIR :
-ofdmdigfilttype=7
-# PAPD mode:
-papdmode=2
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-#OOB parameters
-hostwake=0x40
-hostrdy=0x41
-usbrdy=0x03
-usbrdydelay=100
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x10 for Host awake
-muxenab=0x10
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-glitch_based_crsmin=1
deleted file mode 100644
@@ -1,62 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.4"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo-plus2/post-build.sh"
-
-# wireless firmware
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
-
-# wireless tools
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
This defconfig has been failing to build for several months, with nobody stepping up to fix it. It's time to drop it. See https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/ for a notification on August 6, 2022 about the issues with this defconfig. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499055 Cc: Louis Aussedat <aussedat.louis@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> --- DEVELOPERS | 2 - .../nanopi-neo-plus2/extlinux.conf | 4 -- .../friendlyarm/nanopi-neo-plus2/genimage.cfg | 40 ------------ .../nanopi-neo-plus2/linux-extras.config | 10 --- .../nanopi-neo-plus2/post-build.sh | 4 -- board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 ----------- ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ---------------- .../friendlyarm_nanopi_neo_plus2_defconfig | 62 ------------------- 8 files changed, 212 deletions(-) delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig