diff --git a/board/friendlyarm/nanopi-neo/boot.cmd b/board/friendlyarm/nanopi-neo/boot.cmd
deleted file mode 100644
index 7874057859..0000000000
--- a/board/friendlyarm/nanopi-neo/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-neo.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-neo/genimage.cfg b/board/friendlyarm/nanopi-neo/genimage.cfg
deleted file mode 100644
index 92af667552..0000000000
--- a/board/friendlyarm/nanopi-neo/genimage.cfg
+++ /dev/null
@@ -1,34 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-neo.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
diff --git a/board/friendlyarm/nanopi-neo/readme.txt b/board/friendlyarm/nanopi-neo/readme.txt
deleted file mode 100644
index 84fb9cc484..0000000000
--- a/board/friendlyarm/nanopi-neo/readme.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Intro
-=====
-
-The instructions herein are valid for the FriendlyARM NanoPi NEO,
-both the 256MiB and 512MiB versions. They should also work for the
-NanoPi NEO Air, but this is untested so far.
-
-The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
-  - quad-core Cortex-A7 @1.2GHz
-  - 256 or 512MiB of DDR
-  - uSDCard as only storage option
-  - 3x USB 2.0 host (one socket, two on expansion pin-holes)
-  - 1x USB 2.0 OTG (also used as power source)
-  - 10/100 ethernet MAC
-  - GPIOs, SPI, I2c...
-
-Support for the Nanopi NEO in U-Boot and Linux is very recent, so only
-core, basic features are available.
-
-Unfortunately, support for the ethernet MAC and the USB OTG are not
-yet upstream, but are being actively worked on.
-
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_neo_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-You will then obtain an image ready to be written to your micro SDcard:
-
-    $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-Notes:
-  - replace 'sdX' with the actual device with your micro SDcard,
-  - you may need to be root to do that (use 'sudo').
-
-Insert the micro SDcard in your NanoPi NEO and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/friendlyarm_nanopi_neo_defconfig b/configs/friendlyarm_nanopi_neo_defconfig
deleted file mode 100644
index 1519d828d6..0000000000
--- a/configs/friendlyarm_nanopi_neo_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO"
-
-# Linux headers same as kernel, a 5.3 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
-
-# Use a -rc kernel to get the DTS
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.13"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-neo"
-
-# Use an -rc tag because the defconfig is very recent
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo/boot.cmd"
-
-# Build an sdcard image
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
