diff mbox series

[v2,4/4] configs/mx6cubox: bump Linux and U-Boot versions

Message ID 20201006103955.464562-4-francois.perrad@gadz.org
State Accepted
Headers show
Series [v2,1/4] configs/mx6cubox: use recommended layout | expand

Commit Message

Francois Perrad Oct. 6, 2020, 10:39 a.m. UTC
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 configs/mx6cubox_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Fabio Estevam Oct. 6, 2020, 11:23 a.m. UTC | #1
Hi Francois,

On Tue, Oct 6, 2020 at 7:40 AM Francois Perrad <fperrad@gmail.com> wrote:
>
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  configs/mx6cubox_defconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig
> index 91848bc07..dc26758ef 100644
> --- a/configs/mx6cubox_defconfig
> +++ b/configs/mx6cubox_defconfig
> @@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/solidrun/mx6cubox/post-image.sh"
>  # Kernel
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.8"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.69"
>  BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15"
> @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
>  BR2_TARGET_UBOOT=y
>  BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
>  BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"

What about using 2020.07?

Thanks
François Perrad Oct. 6, 2020, 11:59 a.m. UTC | #2
Le mar. 6 oct. 2020 à 13:23, Fabio Estevam <festevam@gmail.com> a écrit :

> Hi Francois,
>
> On Tue, Oct 6, 2020 at 7:40 AM Francois Perrad <fperrad@gmail.com> wrote:
> >
> > Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> > ---
> >  configs/mx6cubox_defconfig | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig
> > index 91848bc07..dc26758ef 100644
> > --- a/configs/mx6cubox_defconfig
> > +++ b/configs/mx6cubox_defconfig
> > @@ -17,7 +17,7 @@
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/solidrun/mx6cubox/post-image.sh"
> >  # Kernel
> >  BR2_LINUX_KERNEL=y
> >  BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.8"
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.69"
> >  BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
> >  BR2_LINUX_KERNEL_DTS_SUPPORT=y
> >  BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i
> imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard
> imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i
> imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard
> imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15"
> > @@ -32,7 +32,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
> >  BR2_TARGET_UBOOT=y
> >  BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> >  BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> > -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
>
> What about using 2020.07?
>
>

With 2020.07 (or 2020.04 or 2020.10), something goes wrong
I think it is related to
https://gitlab.denx.de/u-boot/u-boot/-/commit/6c3fbf3e456c49c2f43c0c286106a0d4b099b67b


U-Boot SPL 2020.07 (Oct 06 2020 - 13:33:44 +0200)
WDT:   Not found!
Trying to boot from MMC1


U-Boot 2020.07 (Oct 06 2020 - 13:33:44 +0200)

CPU:   Freescale i.MX6SOLO rev1.3 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 36C
Reset cause: POR
Board: MX6 Cubox-i
DRAM:  512 MiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default
environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@2188000 using MAC address from ROM
eth0: ethernet@2188000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
336 bytes read in 12 ms (27.3 KiB/s)
## Executing script at 12000000
SCRIPT FAILED: continuing...
switch to partitions #0, OK
mmc2(part 0) is current device
** No partition table - mmc 2 **
No SATA device found!
starting USB...



> Thanks
>
Fabio Estevam Oct. 6, 2020, 12:24 p.m. UTC | #3
Hi François,

On Tue, Oct 6, 2020 at 8:59 AM François Perrad <francois.perrad@gadz.org> wrote:

> With 2020.07 (or 2020.04 or 2020.10), something goes wrong
> I think it is related to https://gitlab.denx.de/u-boot/u-boot/-/commit/6c3fbf3e456c49c2f43c0c286106a0d4b099b67b

Care to report it to the U-Boot list with the author of such commit on
Cc, please?

Thanks
diff mbox series

Patch

diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig
index 91848bc07..dc26758ef 100644
--- a/configs/mx6cubox_defconfig
+++ b/configs/mx6cubox_defconfig
@@ -17,7 +17,7 @@  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/solidrun/mx6cubox/post-image.sh"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.69"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-cubox-i imx6dl-cubox-i-emmc-som-v15 imx6dl-cubox-i-som-v15 imx6dl-hummingboard imx6dl-hummingboard-emmc-som-v15 imx6dl-hummingboard-som-v15 imx6q-cubox-i imx6q-cubox-i-emmc-som-v15 imx6q-cubox-i-som-v15 imx6q-hummingboard imx6q-hummingboard-emmc-som-v15 imx6q-hummingboard-som-v15"
@@ -32,7 +32,7 @@  BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mx6cuboxi"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y