diff mbox series

[v2,1/4] configs/mx6cubox: use recommended layout

Message ID 20201006103955.464562-1-francois.perrad@gadz.org
State Accepted
Headers show
Series [v2,1/4] configs/mx6cubox: use recommended layout | expand

Commit Message

Francois Perrad Oct. 6, 2020, 10:39 a.m. UTC 
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 configs/mx6cubox_defconfig | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

Comments

Thomas Petazzoni Oct. 8, 2020, 9:26 p.m. UTC | #1 
On Tue,  6 Oct 2020 12:39:52 +0200
Francois Perrad <fperrad@gmail.com> wrote:

> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  configs/mx6cubox_defconfig | 28 ++++++++++++++++++++--------
>  1 file changed, 20 insertions(+), 8 deletions(-)

Series applied, thanks!

Thomas
diff mbox series

Patch

diff --git a/configs/mx6cubox_defconfig b/configs/mx6cubox_defconfig
index 7e9b16bd2..18e06fea8 100644
--- a/configs/mx6cubox_defconfig
+++ b/configs/mx6cubox_defconfig
@@ -1,15 +1,34 @@ 
+# Architecture
 BR2_arm=y
 BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
+
+# Toolchain
 # Linux headers same as kernel, a 5.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
+
+# System configuration
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/mx6cubox/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/solidrun/mx6cubox/post-image.sh"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.8"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-cubox-i imx6dl-cubox-i imx6q-hummingboard imx6dl-hummingboard"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem images
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Bootloaders
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6cuboxi"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -17,14 +36,7 @@  BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.8"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-cubox-i imx6dl-cubox-i imx6q-hummingboard imx6dl-hummingboard"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
 # required tools to create the SD card image
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y