new file mode 100644
@@ -0,0 +1,11 @@
+setenv kernel_filename "Image"
+setenv fdt_filename "meson-gxbb-odroidc2.dtb"
+setenv bootargs "console=ttyAML0,115200n8 earlyprintk root=/dev/mmcblk1p2 rootwait rw"
+
+echo > Loading Kernel...
+fatload mmc 0:1 ${kernel_addr_r} ${kernel_filename}
+echo > Loading FDT...
+fatload mmc 0:1 ${fdt_addr_r} ${fdt_filename}
+
+echo > Booting System...
+booti ${kernel_addr_r} - ${fdt_addr_r}
new file mode 100644
@@ -0,0 +1,33 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "meson-gxbb-odroidc2.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "uboot-odc2.img"
+ offset = 49664
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
new file mode 100755
@@ -0,0 +1,8 @@
+#!/bin/sh
+# post-build.sh for Odroid C2 taken from CubieBoard's post-build.sh
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/bin/mkimage
+
+${MKIMAGE} -A arm64 -O linux -T script -C none -n "Boot script" -d "${BOARD_DIR}/boot.cmd" ${BINARIES_DIR}/boot.scr
new file mode 100755
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+SIGNED_UBOOT_IMG="${BINARIES_DIR}/uboot-odc2.img"
+ODRODIDC2_ATF_FOLDER="${HOST_DIR}/usr/share/odroidc2_atf"
+IM_FILE="${ODRODIDC2_ATF_FOLDER}/bl1.bin.hardkernel"
+
+${HOST_DIR}/bin/fip_create --bl30 ${ODRODIDC2_ATF_FOLDER}/bl30.bin --bl301 ${ODRODIDC2_ATF_FOLDER}/bl301.bin --bl31 ${ODRODIDC2_ATF_FOLDER}/bl31.bin --bl33 ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/fip.bin
+${HOST_DIR}/bin/fip_create --dump ${BINARIES_DIR}/fip.bin
+cat ${ODRODIDC2_ATF_FOLDER}/bl2.package ${BINARIES_DIR}/fip.bin > ${BINARIES_DIR}/boot_new.bin
+${HOST_DIR}/bin/amlbootsig ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img
+
+dd if=${BINARIES_DIR}/u-boot.img of=${SIGNED_UBOOT_IMG} bs=512 skip=96
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
+dd if=${IM_FILE} of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc
+dd if=${IM_FILE} of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc
+
+rm -rf ${BINARIES_DIR}/fip.bin ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img
new file mode 100644
@@ -0,0 +1,57 @@
+ODROID-C2
+
+Intro
+=====
+To be able to use ODROID-C2 board with the images generated by
+Buildroot, you have to prepare the SDCard or eMMC.
+
+How to build it
+===============
+
+ $ make odroidc2_defconfig
+
+Then you can edit the build options using
+
+ $ make menuconfig
+
+Compile all and build rootfs image:
+
+ $ make
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+ output/images/
+ +-- Image
+ +-- uImage [2]
+ +-- boot.scr [1]
+ +-- boot.vfat
+ +-- meson-gxbb-odroidc2.dtb
+ +-- rootfs.ext2
+ +-- rootfs.ext4
+ +-- rootfs.tar
+ +-- sdcard.img
+ +-- uboot-odc2.img [3]
+ `-- u-boot.bin
+
+[1] This is the ODROID-C2 configuration file used in u-boot.
+[2] This is the ODROID-C2 kernel image file which will be booted.
+[3] This is the ODROID-C2 signed u-boot image which will be used.
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your ODROID-C2, and power it up. Your new system
+should come up now.
new file mode 100755
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+
+load_drivers()
+{
+ echo "Loading needed modules..."
+ for file in $(echo "dwmac_generic dwmac-meson8b meson_dw_hdmi meson_gxbb_wdt"); do
+ modprobe ${file}
+ done
+}
+
+case "$1" in
+ start)
+ load_drivers
+ ;;
+ stop)
+ ;;
+ restart|reload)
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|restart}"
+ exit 1
+esac
re add the odroidc2 board to buildroot. - uses latest uboot. - uses kernel 5.6 Signed-off-by: Dagg Stompler <daggs@gmx.com> --- board/hardkernel/odroidc2/boot.cmd | 11 ++++ board/hardkernel/odroidc2/genimage.cfg | 33 +++++++++++ board/hardkernel/odroidc2/post-build.sh | 8 +++ board/hardkernel/odroidc2/post-image.sh | 29 ++++++++++ board/hardkernel/odroidc2/readme.txt | 57 +++++++++++++++++++ .../rootfs_overlay/etc/init.d/S09modload | 23 ++++++++ 6 files changed, 161 insertions(+) create mode 100644 board/hardkernel/odroidc2/boot.cmd create mode 100644 board/hardkernel/odroidc2/genimage.cfg create mode 100755 board/hardkernel/odroidc2/post-build.sh create mode 100755 board/hardkernel/odroidc2/post-image.sh create mode 100644 board/hardkernel/odroidc2/readme.txt create mode 100755 board/hardkernel/odroidc2/rootfs_overlay/etc/init.d/S09modload -- 2.26.1