From patchwork Thu May 25 18:34:57 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Romain Naour X-Patchwork-Id: 767087 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from hemlock.osuosl.org (smtp2.osuosl.org [140.211.166.133]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 3wYdHR0hrYz9s7M for ; Fri, 26 May 2017 04:35:31 +1000 (AEST) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="Nw+PEdbm"; dkim-atps=neutral Received: from localhost (localhost [127.0.0.1]) by hemlock.osuosl.org (Postfix) with ESMTP id 628EC89FF0; Thu, 25 May 2017 18:35:28 +0000 (UTC) X-Virus-Scanned: amavisd-new at osuosl.org Received: from hemlock.osuosl.org ([127.0.0.1]) by localhost (.osuosl.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 4hmEsnKdwl9n; Thu, 25 May 2017 18:35:19 +0000 (UTC) Received: from ash.osuosl.org (ash.osuosl.org [140.211.166.34]) by hemlock.osuosl.org (Postfix) with ESMTP id 3C07989FC3; Thu, 25 May 2017 18:35:19 +0000 (UTC) X-Original-To: buildroot@lists.busybox.net Delivered-To: buildroot@osuosl.org Received: from fraxinus.osuosl.org (smtp4.osuosl.org [140.211.166.137]) by ash.osuosl.org (Postfix) with ESMTP id E0F3B1BFC4F for ; Thu, 25 May 2017 18:35:14 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by fraxinus.osuosl.org (Postfix) with ESMTP id D7EF7884D7 for ; Thu, 25 May 2017 18:35:14 +0000 (UTC) X-Virus-Scanned: amavisd-new at osuosl.org Received: from fraxinus.osuosl.org ([127.0.0.1]) by localhost (.osuosl.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id VK2xaAM7i8Wf for ; Thu, 25 May 2017 18:35:10 +0000 (UTC) X-Greylist: domain auto-whitelisted by SQLgrey-1.7.6 Received: from mail-wm0-f65.google.com (mail-wm0-f65.google.com [74.125.82.65]) by fraxinus.osuosl.org (Postfix) with ESMTPS id 45EC6884D6 for ; Thu, 25 May 2017 18:35:09 +0000 (UTC) Received: by mail-wm0-f65.google.com with SMTP id b84so39251097wmh.0 for ; Thu, 25 May 2017 11:35:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=8VDBpxWiajRgRDXYGXNBMP1uLD+hEP/rXn5zF5XPIfA=; b=Nw+PEdbmWMa5WuuqE06VoKfVfuY6bhn+RbzmAHzc93jymBWvOEeoqk3OC3h6WYN5ZT V71i63EGkzsQ6O2VzUvFrBsu8rThls4+c+X0U9yHhbj4dvJl3O5+oWfKsSe8Jf0P3pVo t6nEn3NTqJsdZB3ELynR/wDyp7fJauzZDD5Or0xK+M0iEKBq0bsPfoRUEm2ocAtEy1jq ty36daHKLCBhtJObeMlLNv+lX4DsdfBodRFxvvzeLXLvZXQKDiJ1f3UE9DWcQfMw/9zd kDMNl9KonlaYoBq/Owui59b+GdJpNniqs3601rWKseJhPEIpyFCWI4Rmtn0vfVdDkn3x m1ng== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=8VDBpxWiajRgRDXYGXNBMP1uLD+hEP/rXn5zF5XPIfA=; b=XrG/eQ02NyIpVtG/FvU3EhxEB6pBG3yEkmBaO707aZhF6czUfN9hbTLvRWEK1qlYiT Je773uONPIEM2lCemWvVceho7tXPZ6b33io6UVgPhFtknj9lpMNujcE4MKJlkvs841qI 1Uayx+kQdwHN7Bzax9dFoL/DkggDB+3nil0dAkoZAIn9A7p89CrEGnP0s+i6XFlmS9qo 4G9U1STSHw6mQjSWfOw2NCODYEHP46u/vCLa1jtIHEKLkH9elsL7lDT81Nc8jNmbU47O 1Vf8lUGc3mbBKg2UxWfyuqKLxRhQz9X2/im1QL5Zoqki7TV3kbEWZ7a4KjmFQZ+Lkite RuQA== X-Gm-Message-State: AODbwcAr8DOWJQyazOi4GMsW8+8T9fLmJebFkUHSNlrER/2xHxQuX5ga 7ryeffQYh8TpYQRztiA= X-Received: by 10.28.31.16 with SMTP id f16mr11041904wmf.118.1495737305140; Thu, 25 May 2017 11:35:05 -0700 (PDT) Received: from localhost.localdomain (gam75-1-81-57-22-125.fbx.proxad.net. [81.57.22.125]) by smtp.gmail.com with ESMTPSA id d7sm5148503wrb.10.2017.05.25.11.35.02 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 25 May 2017 11:35:04 -0700 (PDT) From: Romain Naour To: buildroot@buildroot.org Date: Thu, 25 May 2017 20:34:57 +0200 Message-Id: <20170525183457.12169-3-romain.naour@gmail.com> X-Mailer: git-send-email 2.9.4 In-Reply-To: <20170525183457.12169-1-romain.naour@gmail.com> References: <20170525183457.12169-1-romain.naour@gmail.com> Cc: Romain Naour , Dagg Stompler Subject: [Buildroot] [for-next 3/3] package/gcc: remove gcc 4.9 X-BeenThere: buildroot@busybox.net X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: Discussion and development of buildroot List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: buildroot-bounces@busybox.net Sender: "buildroot" We're already using 6.x as default, and have 5.x on the lower side together with 7.x (7.1) on the higher side. Signed-off-by: Romain Naour Cc: Dagg Stompler --- configs/odroidc2_defconfig is still using gcc 4.9 due to bugs in uboot. But since then uboot version was changed. Dagg can you test again with gcc 5 ? --- Config.in.legacy | 7 + ...et-68059-libgcc-should-not-use-__write-fo.patch | 43 -- package/gcc/4.9.4/100-uclibc-conf.patch | 15 - ...00-powerpc-link-with-math-lib.patch.conditional | 122 ---- package/gcc/4.9.4/111-pr65730.patch | 34 -- ...gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch | 26 - package/gcc/4.9.4/130-pr43538.patch | 25 - ...tizer-Fix-build-with-_FILE_OFFSET_BITS-64.patch | 37 -- package/gcc/4.9.4/301-missing-execinfo_h.patch | 13 - package/gcc/4.9.4/810-arm-softfloat-libgcc.patch | 30 - package/gcc/4.9.4/830-arm_unbreak_armv4t.patch | 13 - .../840-microblaze-enable-dwarf-eh-support.patch | 166 ------ package/gcc/4.9.4/850-libstdcxx-uclibc-c99.patch | 274 --------- package/gcc/4.9.4/860-cilk-wchar.patch | 56 -- .../870-xtensa-add-mauto-litpools-option.patch | 287 --------- .../871-xtensa-reimplement-register-spilling.patch | 76 --- ...unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch | 33 -- .../gcc/4.9.4/873-xtensa-fix-_Unwind_GetCFA.patch | 40 -- .../gcc/4.9.4/874-xtensa-add-uclinux-support.patch | 169 ------ .../gcc/4.9.4/880-nios2_legitimize_address.patch | 49 -- package/gcc/4.9.4/890-fix-m68k-compile.patch | 15 - package/gcc/4.9.4/891-fix-m68k-uclinux.patch | 18 - package/gcc/4.9.4/900-musl-support.patch | 640 --------------------- package/gcc/4.9.4/901-microblaze-uclibc.patch | 21 - .../930-libgcc-disable-split-stack-nothreads.patch | 14 - package/gcc/4.9.4/940-uclinux-enable-threads.patch | 20 - package/gcc/Config.in.host | 22 - package/gcc/gcc.hash | 2 - 28 files changed, 7 insertions(+), 2260 deletions(-) delete mode 100644 package/gcc/4.9.4/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch delete mode 100644 package/gcc/4.9.4/100-uclibc-conf.patch delete mode 100644 package/gcc/4.9.4/1000-powerpc-link-with-math-lib.patch.conditional delete mode 100644 package/gcc/4.9.4/111-pr65730.patch delete mode 100644 package/gcc/4.9.4/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch delete mode 100644 package/gcc/4.9.4/130-pr43538.patch delete mode 100644 package/gcc/4.9.4/140-sanitizer-Fix-build-with-_FILE_OFFSET_BITS-64.patch delete mode 100644 package/gcc/4.9.4/301-missing-execinfo_h.patch delete mode 100644 package/gcc/4.9.4/810-arm-softfloat-libgcc.patch delete mode 100644 package/gcc/4.9.4/830-arm_unbreak_armv4t.patch delete mode 100644 package/gcc/4.9.4/840-microblaze-enable-dwarf-eh-support.patch delete mode 100644 package/gcc/4.9.4/850-libstdcxx-uclibc-c99.patch delete mode 100644 package/gcc/4.9.4/860-cilk-wchar.patch delete mode 100644 package/gcc/4.9.4/870-xtensa-add-mauto-litpools-option.patch delete mode 100644 package/gcc/4.9.4/871-xtensa-reimplement-register-spilling.patch delete mode 100644 package/gcc/4.9.4/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch delete mode 100644 package/gcc/4.9.4/873-xtensa-fix-_Unwind_GetCFA.patch delete mode 100644 package/gcc/4.9.4/874-xtensa-add-uclinux-support.patch delete mode 100644 package/gcc/4.9.4/880-nios2_legitimize_address.patch delete mode 100644 package/gcc/4.9.4/890-fix-m68k-compile.patch delete mode 100644 package/gcc/4.9.4/891-fix-m68k-uclinux.patch delete mode 100644 package/gcc/4.9.4/900-musl-support.patch delete mode 100644 package/gcc/4.9.4/901-microblaze-uclibc.patch delete mode 100644 package/gcc/4.9.4/930-libgcc-disable-split-stack-nothreads.patch delete mode 100644 package/gcc/4.9.4/940-uclinux-enable-threads.patch diff --git a/Config.in.legacy b/Config.in.legacy index a5f7288..391db6b 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -145,6 +145,13 @@ endif ############################################################################### comment "Legacy options removed in 2017.08" +config BR2_GCC_VERSION_4_9_X + bool "gcc 4.9.x support removed" + select BR2_LEGACY + help + Support for gcc version 4.9.x has been removed. The current + default version (6.x or later) has been selected instead. + config BR2_GCC_VERSION_4_8_X bool "gcc 4.8.x support removed" select BR2_LEGACY diff --git a/package/gcc/4.9.4/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch b/package/gcc/4.9.4/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch deleted file mode 100644 index fd2bc69..0000000 --- a/package/gcc/4.9.4/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 80bc14a5249da7054b716229206b453f339b4a5e Mon Sep 17 00:00:00 2001 -From: nsz -Date: Mon, 23 Nov 2015 15:17:55 +0000 -Subject: [PATCH] [ARM] PR target/68059 libgcc should not use __write for - printing fatal error - -libgcc/ - PR target/68059 - * config/arm/linux-atomic-64bit.c (__write): Rename to... - (write): ...this and fix the return type. - -git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230762 138bc75d-0d04-0410-961f-82ee72b054a4 - -Signed-off-by: Arnout Vandecappelle (Essensium/Mind) ---- - libgcc/config/arm/linux-atomic-64bit.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/libgcc/config/arm/linux-atomic-64bit.c b/libgcc/config/arm/linux-atomic-64bit.c -index 5b8c6e2..9078673 100644 ---- a/libgcc/config/arm/linux-atomic-64bit.c -+++ b/libgcc/config/arm/linux-atomic-64bit.c -@@ -33,7 +33,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see - kernels; we check for that in an init section and bail out rather - unceremoneously. */ - --extern unsigned int __write (int fd, const void *buf, unsigned int count); -+extern int write (int fd, const void *buf, unsigned int count); - extern void abort (void); - - /* Kernel helper for compare-and-exchange. */ -@@ -56,7 +56,7 @@ static void __check_for_sync8_kernelhelper (void) - for the user - I'm not sure I can rely on much else being - available at this point, so do the same as generic-morestack.c - write () and abort (). */ -- __write (2 /* stderr. */, err, sizeof (err)); -+ write (2 /* stderr. */, err, sizeof (err)); - abort (); - } - }; --- -2.10.2 - diff --git a/package/gcc/4.9.4/100-uclibc-conf.patch b/package/gcc/4.9.4/100-uclibc-conf.patch deleted file mode 100644 index d56bf0a..0000000 --- a/package/gcc/4.9.4/100-uclibc-conf.patch +++ /dev/null @@ -1,15 +0,0 @@ -Index: gcc-4.8.0/contrib/regression/objs-gcc.sh -=================================================================== ---- gcc-4.8.0.orig/contrib/regression/objs-gcc.sh 2009-04-09 17:00:19.000000000 +0200 -+++ gcc-4.8.0/contrib/regression/objs-gcc.sh 2013-03-23 17:39:04.000000000 +0100 -@@ -106,6 +106,10 @@ - then - make all-gdb all-dejagnu all-ld || exit 1 - make install-gdb install-dejagnu install-ld || exit 1 -+elif [ $H_REAL_TARGET = $H_REAL_HOST -a $H_REAL_TARGET = i686-pc-linux-uclibc ] -+ then -+ make all-gdb all-dejagnu all-ld || exit 1 -+ make install-gdb install-dejagnu install-ld || exit 1 - elif [ $H_REAL_TARGET = $H_REAL_HOST ] ; then - make bootstrap || exit 1 - make install || exit 1 diff --git a/package/gcc/4.9.4/1000-powerpc-link-with-math-lib.patch.conditional b/package/gcc/4.9.4/1000-powerpc-link-with-math-lib.patch.conditional deleted file mode 100644 index 5e0484f..0000000 --- a/package/gcc/4.9.4/1000-powerpc-link-with-math-lib.patch.conditional +++ /dev/null @@ -1,122 +0,0 @@ -http://gcc.gnu.org/ml/gcc-patches/2008-10/msg00269.html - -On glibc the libc.so carries a copy of the math function copysignl() but -on uClibc math functions like copysignl() live in libm. Since libgcc_s -contains unresolved symbols, any attempt to link against libgcc_s -without explicitely specifying -lm fails, resulting in a broken -bootstrap of the compiler. - -Forward port to gcc 4.5.1 by Gustavo Zacarias - ---- - libgcc/Makefile.in | 4 +++- - libgcc/configure | 32 ++++++++++++++++++++++++++++++++ - libgcc/configure.ac | 21 +++++++++++++++++++++ - 3 files changed, 56 insertions(+), 1 deletion(-) - -Index: b/libgcc/Makefile.in -=================================================================== ---- a/libgcc/Makefile.in -+++ b/libgcc/Makefile.in -@@ -42,6 +42,7 @@ - enable_vtable_verify = @enable_vtable_verify@ - enable_decimal_float = @enable_decimal_float@ - fixed_point = @fixed_point@ -+LIBGCC_LIBM = @LIBGCC_LIBM@ - - host_noncanonical = @host_noncanonical@ - target_noncanonical = @target_noncanonical@ -@@ -943,9 +944,10 @@ - @multilib_dir@,$(MULTIDIR),$(subst \ - @shlib_objs@,$(objects) libgcc.a,$(subst \ - @shlib_base_name@,libgcc_s,$(subst \ -+ @libgcc_libm@,$(LIBGCC_LIBM),$(subst \ - @shlib_map_file@,$(mapfile),$(subst \ - @shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(subst \ -- @shlib_slibdir@,$(shlib_slibdir),$(SHLIB_LINK)))))))) -+ @shlib_slibdir@,$(shlib_slibdir),$(SHLIB_LINK))))))))) - - libunwind$(SHLIB_EXT): $(libunwind-s-objects) $(extra-parts) - # @multilib_flags@ is still needed because this may use -Index: b/libgcc/configure -=================================================================== ---- a/libgcc/configure -+++ b/libgcc/configure -@@ -564,6 +564,7 @@ - tmake_file - sfp_machine_header - set_use_emutls -+LIBGCC_LIBM - set_have_cc_tls - vis_hide - fixed_point -@@ -4535,6 +4536,37 @@ - fi - fi - -+# On powerpc libgcc_s references copysignl which is a libm function but -+# glibc apparently also provides it via libc as opposed to uClibc where -+# it lives in libm. -+echo "$as_me:$LINENO: checking for library containing copysignl" >&5 -+echo $ECHO_N "checking for library containing copysignl... $ECHO_C" >&6 -+if test "${libgcc_cv_copysignl_lib+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ -+ echo '#include ' > conftest.c -+ echo 'int the_libc = __UCLIBC__ + __powerpc__;' >> conftest.c -+ libgcc_cv_copysignl_lib="-lc" -+ if { ac_try='${CC-cc} -S conftest.c -o conftest.s 1>&5' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } -+ then -+ libgcc_cv_copysignl_lib="-lm" -+ fi -+ rm -f conftest.* -+ -+fi -+echo "$as_me:$LINENO: result: $libgcc_cv_copysignl_lib" >&5 -+echo "${ECHO_T}$libgcc_cv_copysignl_lib" >&6 -+ -+case /${libgcc_cv_copysignl_lib}/ in -+ /-lm/) LIBGCC_LIBM="$LIBGCC_LIBM -lm" ;; -+ *) LIBGCC_LIBM= ;; -+esac - - # Conditionalize the makefile for this target machine. - tmake_file_= -Index: b/libgcc/configure.ac -=================================================================== ---- a/libgcc/configure.ac -+++ b/libgcc/configure.ac -@@ -357,6 +357,27 @@ - fi - AC_SUBST(set_have_cc_tls) - -+# On powerpc libgcc_s references copysignl which is a libm function but -+# glibc apparently also provides it via libc as opposed to uClibc where -+# it lives in libm. -+AC_CACHE_CHECK -+ libgcc_cv_copysignl_lib, -+ echo '#include ' > conftest.c -+ echo 'int the_libc = __UCLIBC__ + __powerpc__;' >> conftest.c -+ libgcc_cv_copysignl_lib="-lc" -+ if AC_TRY_COMMAND(${CC-cc} -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD) -+ then -+ libgcc_cv_copysignl_lib="-lm" -+ fi -+ rm -f conftest.* -+ ]) -+ -+case /${libgcc_cv_copysignl_lib}/ in -+ /-lm/) LIBGCC_LIBM="$LIBGCC_LIBM -lm" ;; -+ *) LIBGCC_LIBM= ;; -+esac -+AC_SUBST(LIBGCC_LIBM) -+ - # See if we have emulated thread-local storage. - GCC_CHECK_EMUTLS - set_use_emutls= diff --git a/package/gcc/4.9.4/111-pr65730.patch b/package/gcc/4.9.4/111-pr65730.patch deleted file mode 100644 index 8a41fd2..0000000 --- a/package/gcc/4.9.4/111-pr65730.patch +++ /dev/null @@ -1,34 +0,0 @@ -From b9a7775674d91c7af8043a83211ffeaa576327d7 Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Fri, 10 Apr 2015 17:46:30 +0300 -Subject: [PATCH] Fix PR target/65730 - -2015-05-20 Max Filippov -gcc/ - * config/xtensa/xtensa.c (init_alignment_context): Replace MULT - by BITS_PER_UNIT with ASHIFT by exact_log2 (BITS_PER_UNIT). - -Signed-off-by: Max Filippov ---- -Backported from: svn+ssh://gcc.gnu.org/svn/gcc/trunk@223452 -Changes to ChangeLog are dropped. - - gcc/config/xtensa/xtensa.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -Index: b/gcc/config/xtensa/xtensa.c -=================================================================== ---- a/gcc/config/xtensa/xtensa.c -+++ b/gcc/config/xtensa/xtensa.c -@@ -1436,8 +1436,9 @@ - if (ac->shift != NULL_RTX) - { - /* Shift is the byte count, but we need the bitcount. */ -- ac->shift = expand_simple_binop (SImode, MULT, ac->shift, -- GEN_INT (BITS_PER_UNIT), -+ gcc_assert (exact_log2 (BITS_PER_UNIT) >= 0); -+ ac->shift = expand_simple_binop (SImode, ASHIFT, ac->shift, -+ GEN_INT (exact_log2 (BITS_PER_UNIT)), - NULL_RTX, 1, OPTAB_DIRECT); - ac->modemask = expand_simple_binop (SImode, ASHIFT, - GEN_INT (GET_MODE_MASK (mode)), diff --git a/package/gcc/4.9.4/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch b/package/gcc/4.9.4/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch deleted file mode 100644 index bb77c4b..0000000 --- a/package/gcc/4.9.4/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 9bf6066d588632dab9f78932df15b5b4140f31f3 Mon Sep 17 00:00:00 2001 -From: "Arnout Vandecappelle (Essensium/Mind)" -Date: Fri, 6 Nov 2015 14:27:23 +0100 -Subject: [PATCH] gcc/config.gcc: fix typo for powerpc e6500 cpu_is_64bit - -Otherwise it is not recognized as a 64-bit powerpc and gcc will not generate -64-bit binaries by default. - -Signed-off-by: Arnout Vandecappelle (Essensium/Mind) ---- - gcc/config.gcc | 2 +- - 2 files changed, 4 insertions(+), 1 deletion(-) - -Index: b/gcc/config.gcc -=================================================================== ---- a/gcc/config.gcc -+++ b/gcc/config.gcc -@@ -441,7 +441,7 @@ - extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h htmintrin.h htmxlintrin.h" - need_64bit_hwint=yes - case x$with_cpu in -- xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345678]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|Xe6500) -+ xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345678]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500) - cpu_is_64bit=yes - ;; - esac diff --git a/package/gcc/4.9.4/130-pr43538.patch b/package/gcc/4.9.4/130-pr43538.patch deleted file mode 100644 index 19e57bb..0000000 --- a/package/gcc/4.9.4/130-pr43538.patch +++ /dev/null @@ -1,25 +0,0 @@ -From c037df1be41f8daf4d581d7ffa4ec8cfa640bccf Mon Sep 17 00:00:00 2001 -From: glisse -Date: Fri, 25 Apr 2014 08:03:08 +0000 -Subject: [PATCH] 2014-04-25 Marc Glisse - - PR target/43538 - * mt-gnu: Don't reset CXXFLAGS_FOR_TARGET. - - -git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@209784 138bc75d-0d04-0410-961f-82ee72b054a4 -Signed-off-by: Max Filippov ---- - config/mt-gnu | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/config/mt-gnu b/config/mt-gnu -index 15bf417..5c696f5 100644 ---- a/config/mt-gnu -+++ b/config/mt-gnu -@@ -1 +1 @@ --CXXFLAGS_FOR_TARGET = $(CXXFLAGS) -D_GNU_SOURCE -+CXXFLAGS_FOR_TARGET += -D_GNU_SOURCE --- -2.1.4 - diff --git a/package/gcc/4.9.4/140-sanitizer-Fix-build-with-_FILE_OFFSET_BITS-64.patch b/package/gcc/4.9.4/140-sanitizer-Fix-build-with-_FILE_OFFSET_BITS-64.patch deleted file mode 100644 index 55f3228..0000000 --- a/package/gcc/4.9.4/140-sanitizer-Fix-build-with-_FILE_OFFSET_BITS-64.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 3c536954a67a883630f4a7513a27f02a892c3dcb Mon Sep 17 00:00:00 2001 -From: Evgeniy Stepanov -Date: Tue, 21 Oct 2014 21:08:13 +0000 -Subject: [PATCH] [sanitizer] Fix build with _FILE_OFFSET_BITS=64. - -Sanitizer source is not affected by _FILE_OFFSET_BITS in general, -but this one file must be built with 32-bit off_t. More details in the code. - -git-svn-id: https://llvm.org/svn/llvm-project/compiler-rt/trunk@220328 91177308-0d34-0410-b5e6-96231b3b80d8 -Signed-off-by: Max Filippov ---- - lib/sanitizer_common/sanitizer_platform_limits_posix.cc | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc b/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc -index bbc1108..fc09522 100644 ---- a/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc -+++ b/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc -@@ -13,7 +13,15 @@ - - #include "sanitizer_platform.h" - #if SANITIZER_LINUX || SANITIZER_MAC -+// Tests in this file assume that off_t-dependent data structures match the -+// libc ABI. For example, struct dirent here is what readdir() function (as -+// exported from libc) returns, and not the user-facing "dirent", which -+// depends on _FILE_OFFSET_BITS setting. -+// To get this "true" dirent definition, we undefine _FILE_OFFSET_BITS below. -+#ifdef _FILE_OFFSET_BITS -+#undef _FILE_OFFSET_BITS -+#endif - - #include "sanitizer_internal_defs.h" - #include "sanitizer_platform_limits_posix.h" - --- -2.1.4 - diff --git a/package/gcc/4.9.4/301-missing-execinfo_h.patch b/package/gcc/4.9.4/301-missing-execinfo_h.patch deleted file mode 100644 index 00efda2..0000000 --- a/package/gcc/4.9.4/301-missing-execinfo_h.patch +++ /dev/null @@ -1,13 +0,0 @@ -Index: gcc-4.8.0/boehm-gc/include/gc.h -=================================================================== ---- gcc-4.8.0.orig/boehm-gc/include/gc.h 2007-04-23 23:10:09.000000000 +0200 -+++ gcc-4.8.0/boehm-gc/include/gc.h 2013-03-23 17:39:20.000000000 +0100 -@@ -503,7 +503,7 @@ - #if defined(__linux__) || defined(__GLIBC__) - # include - # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \ -- && !defined(__ia64__) -+ && !defined(__ia64__) && !defined(__UCLIBC__) - # ifndef GC_HAVE_BUILTIN_BACKTRACE - # define GC_HAVE_BUILTIN_BACKTRACE - # endif diff --git a/package/gcc/4.9.4/810-arm-softfloat-libgcc.patch b/package/gcc/4.9.4/810-arm-softfloat-libgcc.patch deleted file mode 100644 index 5efa7fd..0000000 --- a/package/gcc/4.9.4/810-arm-softfloat-libgcc.patch +++ /dev/null @@ -1,30 +0,0 @@ -Index: b/gcc/config/arm/linux-elf.h -=================================================================== ---- a/gcc/config/arm/linux-elf.h -+++ b/gcc/config/arm/linux-elf.h -@@ -60,7 +60,7 @@ - %{shared:-lc} \ - %{!shared:%{profile:-lc_p}%{!profile:-lc}}" - --#define LIBGCC_SPEC "%{mfloat-abi=soft*:-lfloat} -lgcc" -+#define LIBGCC_SPEC "-lgcc" - - #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2" - -Index: b/libgcc/config/arm/t-linux -=================================================================== ---- a/libgcc/config/arm/t-linux -+++ b/libgcc/config/arm/t-linux -@@ -1,6 +1,11 @@ - LIB1ASMSRC = arm/lib1funcs.S - LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx _clzsi2 _clzdi2 \ -- _ctzsi2 _arm_addsubdf3 _arm_addsubsf3 -+ _ctzsi2 _arm_addsubdf3 _arm_addsubsf3 \ -+ _arm_addsubdf3 _arm_addsubsf3 \ -+ _arm_negdf2 _arm_muldivdf3 _arm_cmpdf2 _arm_unorddf2 \ -+ _arm_fixdfsi _arm_fixunsdfsi _arm_truncdfsf2 \ -+ _arm_negsf2 _arm_muldivsf3 _arm_cmpsf2 _arm_unordsf2 \ -+ _arm_fixsfsi _arm_fixunssfsi - - # Just for these, we omit the frame pointer since it makes such a big - # difference. diff --git a/package/gcc/4.9.4/830-arm_unbreak_armv4t.patch b/package/gcc/4.9.4/830-arm_unbreak_armv4t.patch deleted file mode 100644 index 37f8f2a..0000000 --- a/package/gcc/4.9.4/830-arm_unbreak_armv4t.patch +++ /dev/null @@ -1,13 +0,0 @@ -http://sourceware.org/ml/crossgcc/2008-05/msg00009.html - ---- a/gcc/config/arm/linux-eabi.h -+++ b/gcc/config/arm/linux-eabi.h -@@ -45,7 +45,7 @@ - The ARM10TDMI core is the default for armv5t, so set - SUBTARGET_CPU_DEFAULT to achieve this. */ - #undef SUBTARGET_CPU_DEFAULT --#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm10tdmi -+#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm9tdmi - - /* TARGET_BIG_ENDIAN_DEFAULT is set in - config.gcc for big endian configurations. */ diff --git a/package/gcc/4.9.4/840-microblaze-enable-dwarf-eh-support.patch b/package/gcc/4.9.4/840-microblaze-enable-dwarf-eh-support.patch deleted file mode 100644 index 03fc47f..0000000 --- a/package/gcc/4.9.4/840-microblaze-enable-dwarf-eh-support.patch +++ /dev/null @@ -1,166 +0,0 @@ -Fetched from Xilinx gcc git at https://github.com/Xilinx/gcc - -From 23c35173490ac2d6348a668dfc9c1a6eb62171f2 Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" -Date: Mon, 18 Jun 2012 20:18:13 +0200 -Subject: [PATCH] [Patch, microblaze]: Enable DWARF exception handling support. - -Changelog - -2013-03-18 Edgar E. Iglesias - David Holsgrove - - * common/config/microblaze/microblaze-common.c: Remove - TARGET_EXCEPT_UNWIND_INFO definition. - * config/microblaze/microblaze-protos.h: Add - microblaze_eh_return prototype. - * gcc/config/microblaze/microblaze.c: (microblaze_must_save_register, - microblaze_expand_epilogue, microblaze_return_addr): Handle - calls_eh_return - (microblaze_eh_return): New function. - * gcc/config/microblaze/microblaze.h: Define RETURN_ADDR_OFFSET, - EH_RETURN_DATA_REGNO, MB_EH_STACKADJ_REGNUM, EH_RETURN_STACKADJ_RTX, - ASM_PREFERRED_EH_DATA_FORMAT - * gcc/config/microblaze/microblaze.md: Define eh_return pattern. - -Signed-off-by: David Holsgrove -Signed-off-by: Edgar E. Iglesias ---- - gcc/common/config/microblaze/microblaze-common.c | 3 --- - gcc/config/microblaze/microblaze-protos.h | 1 + - gcc/config/microblaze/microblaze.c | 29 ++++++++++++++++++++---- - gcc/config/microblaze/microblaze.h | 15 ++++++++++++ - gcc/config/microblaze/microblaze.md | 11 +++++++++ - 5 files changed, 52 insertions(+), 7 deletions(-) - -Index: b/gcc/common/config/microblaze/microblaze-common.c -=================================================================== ---- a/gcc/common/config/microblaze/microblaze-common.c -+++ b/gcc/common/config/microblaze/microblaze-common.c -@@ -37,7 +37,4 @@ - #undef TARGET_OPTION_OPTIMIZATION_TABLE - #define TARGET_OPTION_OPTIMIZATION_TABLE microblaze_option_optimization_table - --#undef TARGET_EXCEPT_UNWIND_INFO --#define TARGET_EXCEPT_UNWIND_INFO sjlj_except_unwind_info -- - struct gcc_targetm_common targetm_common = TARGETM_COMMON_INITIALIZER; -Index: b/gcc/config/microblaze/microblaze-protos.h -=================================================================== ---- a/gcc/config/microblaze/microblaze-protos.h -+++ b/gcc/config/microblaze/microblaze-protos.h -@@ -54,6 +54,7 @@ - extern int symbol_mentioned_p (rtx); - extern int label_mentioned_p (rtx); - extern bool microblaze_cannot_force_const_mem (enum machine_mode, rtx); -+extern void microblaze_eh_return (rtx op0); - #endif /* RTX_CODE */ - - /* Declare functions in microblaze-c.c. */ -Index: b/gcc/config/microblaze/microblaze.c -=================================================================== ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -1906,6 +1906,11 @@ - if (frame_pointer_needed && (regno == HARD_FRAME_POINTER_REGNUM)) - return 1; - -+ if (crtl->calls_eh_return -+ && regno == MB_ABI_SUB_RETURN_ADDR_REGNUM) { -+ return 1; -+ } -+ - if (!crtl->is_leaf) - { - if (regno == MB_ABI_SUB_RETURN_ADDR_REGNUM) -@@ -1933,6 +1938,13 @@ - return 1; - } - -+ if (crtl->calls_eh_return -+ && (regno == EH_RETURN_DATA_REGNO (0) -+ || regno == EH_RETURN_DATA_REGNO (1))) -+ { -+ return 1; -+ } -+ - return 0; - } - -@@ -2962,6 +2974,12 @@ - emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, fsiz_rtx)); - } - -+ if (crtl->calls_eh_return) -+ emit_insn (gen_addsi3 (stack_pointer_rtx, -+ stack_pointer_rtx, -+ gen_rtx_raw_REG (SImode, -+ MB_EH_STACKADJ_REGNUM))); -+ - emit_jump_insn (gen_return_internal (gen_rtx_REG (Pmode, GP_REG_FIRST + - MB_ABI_SUB_RETURN_ADDR_REGNUM))); - } -@@ -3256,10 +3274,13 @@ - if (count != 0) - return NULL_RTX; - -- return gen_rtx_PLUS (Pmode, -- get_hard_reg_initial_val (Pmode, -- MB_ABI_SUB_RETURN_ADDR_REGNUM), -- GEN_INT (8)); -+ return get_hard_reg_initial_val (Pmode, -+ MB_ABI_SUB_RETURN_ADDR_REGNUM); -+} -+ -+void microblaze_eh_return (rtx op0) -+{ -+ emit_insn (gen_movsi(gen_rtx_MEM(Pmode, stack_pointer_rtx), op0)); - } - - /* Queue an .ident string in the queue of top-level asm statements. -Index: b/gcc/config/microblaze/microblaze.h -=================================================================== ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -184,6 +184,21 @@ - #define INCOMING_RETURN_ADDR_RTX \ - gen_rtx_REG (VOIDmode, GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM) - -+/* Specifies the offset from INCOMING_RETURN_ADDR_RTX and the actual return PC. */ -+#define RETURN_ADDR_OFFSET (8) -+ -+/* Describe how we implement __builtin_eh_return. */ -+#define EH_RETURN_DATA_REGNO(N) (((N) < 2) ? MB_ABI_FIRST_ARG_REGNUM + (N) : INVALID_REGNUM) -+ -+#define MB_EH_STACKADJ_REGNUM MB_ABI_INT_RETURN_VAL2_REGNUM -+#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, MB_EH_STACKADJ_REGNUM) -+ -+/* Select a format to encode pointers in exception handling data. CODE -+ is 0 for data, 1 for code labels, 2 for function pointers. GLOBAL is -+ true if the symbol may be affected by dynamic relocations. */ -+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \ -+ ((flag_pic || GLOBAL) ? DW_EH_PE_aligned : DW_EH_PE_absptr) -+ - /* Use DWARF 2 debugging information by default. */ - #define DWARF2_DEBUGGING_INFO - #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG -Index: b/gcc/config/microblaze/microblaze.md -=================================================================== ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2261,4 +2261,15 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+; This is used in compiling the unwind routines. -+(define_expand "eh_return" -+ [(use (match_operand 0 "general_operand" ""))] -+ "" -+ " -+{ -+ microblaze_eh_return(operands[0]); -+ DONE; -+}") -+ - (include "sync.md") -+ diff --git a/package/gcc/4.9.4/850-libstdcxx-uclibc-c99.patch b/package/gcc/4.9.4/850-libstdcxx-uclibc-c99.patch deleted file mode 100644 index 533d01f..0000000 --- a/package/gcc/4.9.4/850-libstdcxx-uclibc-c99.patch +++ /dev/null @@ -1,274 +0,0 @@ -Allow C99-depending features of libstdc++ with uClibc - -The libstdc++ code is fairly restrictive on how it checks for C99 -compatibility: it requires *complete* C99 support to enable certain -features. For example, uClibc provides a good number of C99 features, -but not C99 complex number support. For this reason, libstdc++ -completely disables many the standard C++ methods that can in fact -work because uClibc provides the necessary functions. - -This patch is similar and highly inspired from -https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, but implemented in -a way that doesn't involve changing the configure.ac script, as -autoreconfiguring gcc is complicated. It simply relies on the fact -that uClibc defines the __UCLIBC__ definition. - -Signed-off-by: Thomas Petazzoni -[Gustavo: update for 4.9.3] - -Index: b/libstdc++-v3/config/locale/generic/c_locale.h -=================================================================== ---- a/libstdc++-v3/config/locale/generic/c_locale.h -+++ b/libstdc++-v3/config/locale/generic/c_locale.h -@@ -70,7 +70,7 @@ - __builtin_va_list __args; - __builtin_va_start(__args, __fmt); - --#ifdef _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - const int __ret = __builtin_vsnprintf(__out, __size, __fmt, __args); - #else - const int __ret = __builtin_vsprintf(__out, __fmt, __args); -Index: b/libstdc++-v3/config/locale/gnu/c_locale.h -=================================================================== ---- a/libstdc++-v3/config/locale/gnu/c_locale.h -+++ b/libstdc++-v3/config/locale/gnu/c_locale.h -@@ -88,7 +88,7 @@ - __builtin_va_list __args; - __builtin_va_start(__args, __fmt); - --#ifdef _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - const int __ret = __builtin_vsnprintf(__out, __size, __fmt, __args); - #else - const int __ret = __builtin_vsprintf(__out, __fmt, __args); -Index: b/libstdc++-v3/include/bits/basic_string.h -=================================================================== ---- a/libstdc++-v3/include/bits/basic_string.h -+++ b/libstdc++-v3/include/bits/basic_string.h -@@ -2843,7 +2843,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if __cplusplus >= 201103L && defined(_GLIBCXX_USE_C99) -+#if __cplusplus >= 201103L && (defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)) - - #include - -Index: b/libstdc++-v3/include/bits/locale_facets_nonio.tcc -=================================================================== ---- a/libstdc++-v3/include/bits/locale_facets_nonio.tcc -+++ b/libstdc++-v3/include/bits/locale_facets_nonio.tcc -@@ -572,7 +572,7 @@ - { - const locale __loc = __io.getloc(); - const ctype<_CharT>& __ctype = use_facet >(__loc); --#ifdef _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - // First try a buffer perhaps big enough. - int __cs_size = 64; - char* __cs = static_cast(__builtin_alloca(__cs_size)); -Index: b/libstdc++-v3/include/bits/locale_facets.tcc -=================================================================== ---- a/libstdc++-v3/include/bits/locale_facets.tcc -+++ b/libstdc++-v3/include/bits/locale_facets.tcc -@@ -987,7 +987,7 @@ - char __fbuf[16]; - __num_base::_S_format_float(__io, __fbuf, __mod); - --#ifdef _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - // First try a buffer perhaps big enough (most probably sufficient - // for non-ios_base::fixed outputs) - int __cs_size = __max_digits * 3; -Index: b/libstdc++-v3/include/c_compatibility/math.h -=================================================================== ---- a/libstdc++-v3/include/c_compatibility/math.h -+++ b/libstdc++-v3/include/c_compatibility/math.h -@@ -56,7 +56,7 @@ - using std::floor; - using std::fmod; - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - using std::fpclassify; - using std::isfinite; - using std::isinf; -Index: b/libstdc++-v3/include/c_compatibility/wchar.h -=================================================================== ---- a/libstdc++-v3/include/c_compatibility/wchar.h -+++ b/libstdc++-v3/include/c_compatibility/wchar.h -@@ -103,7 +103,7 @@ - using std::wmemset; - using std::wcsftime; - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - using std::wcstold; - using std::wcstoll; - using std::wcstoull; -Index: b/libstdc++-v3/include/c_global/cstdio -=================================================================== ---- a/libstdc++-v3/include/c_global/cstdio -+++ b/libstdc++-v3/include/c_global/cstdio -@@ -146,7 +146,7 @@ - using ::vsprintf; - } // namespace - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef snprintf - #undef vfscanf -Index: b/libstdc++-v3/include/c_global/cstdlib -=================================================================== ---- a/libstdc++-v3/include/c_global/cstdlib -+++ b/libstdc++-v3/include/c_global/cstdlib -@@ -182,7 +182,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef _Exit - #undef llabs -Index: b/libstdc++-v3/include/c_global/cwchar -=================================================================== ---- a/libstdc++-v3/include/c_global/cwchar -+++ b/libstdc++-v3/include/c_global/cwchar -@@ -232,7 +232,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef wcstold - #undef wcstoll -@@ -289,7 +289,7 @@ - using std::vwscanf; - #endif - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - using std::wcstold; - using std::wcstoll; - using std::wcstoull; -Index: b/libstdc++-v3/include/c_std/cstdio -=================================================================== ---- a/libstdc++-v3/include/c_std/cstdio -+++ b/libstdc++-v3/include/c_std/cstdio -@@ -144,7 +144,7 @@ - using ::vsprintf; - } // namespace std - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef snprintf - #undef vfscanf -Index: b/libstdc++-v3/include/c_std/cstdlib -=================================================================== ---- a/libstdc++-v3/include/c_std/cstdlib -+++ b/libstdc++-v3/include/c_std/cstdlib -@@ -180,7 +180,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef _Exit - #undef llabs -Index: b/libstdc++-v3/include/c_std/cwchar -=================================================================== ---- a/libstdc++-v3/include/c_std/cwchar -+++ b/libstdc++-v3/include/c_std/cwchar -@@ -228,7 +228,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - #undef wcstold - #undef wcstoll -Index: b/libstdc++-v3/include/ext/vstring.h -=================================================================== ---- a/libstdc++-v3/include/ext/vstring.h -+++ b/libstdc++-v3/include/ext/vstring.h -@@ -2680,7 +2680,7 @@ - _GLIBCXX_END_NAMESPACE_VERSION - } // namespace - --#if ((__cplusplus >= 201103L) && defined(_GLIBCXX_USE_C99)) -+#if ((__cplusplus >= 201103L) && (defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__))) - - #include - -Index: b/libstdc++-v3/include/tr1/cstdio -=================================================================== ---- a/libstdc++-v3/include/tr1/cstdio -+++ b/libstdc++-v3/include/tr1/cstdio -@@ -33,7 +33,7 @@ - - #include - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - namespace std _GLIBCXX_VISIBILITY(default) - { -Index: b/libstdc++-v3/include/tr1/cstdlib -=================================================================== ---- a/libstdc++-v3/include/tr1/cstdlib -+++ b/libstdc++-v3/include/tr1/cstdlib -@@ -35,7 +35,7 @@ - - #if _GLIBCXX_HOSTED - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - namespace std _GLIBCXX_VISIBILITY(default) - { -Index: b/libstdc++-v3/include/tr1/cwchar -=================================================================== ---- a/libstdc++-v3/include/tr1/cwchar -+++ b/libstdc++-v3/include/tr1/cwchar -@@ -52,7 +52,7 @@ - using std::vwscanf; - #endif - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - using std::wcstold; - using std::wcstoll; - using std::wcstoull; -Index: b/libstdc++-v3/include/tr1/stdlib.h -=================================================================== ---- a/libstdc++-v3/include/tr1/stdlib.h -+++ b/libstdc++-v3/include/tr1/stdlib.h -@@ -33,7 +33,7 @@ - - #if _GLIBCXX_HOSTED - --#if _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - - using std::tr1::atoll; - using std::tr1::strtoll; -Index: b/libstdc++-v3/src/c++11/debug.cc -=================================================================== ---- a/libstdc++-v3/src/c++11/debug.cc -+++ b/libstdc++-v3/src/c++11/debug.cc -@@ -788,7 +788,7 @@ - int __n __attribute__ ((__unused__)), - const char* __fmt, _Tp __s) const throw () - { --#ifdef _GLIBCXX_USE_C99 -+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__) - std::snprintf(__buf, __n, __fmt, __s); - #else - std::sprintf(__buf, __fmt, __s); diff --git a/package/gcc/4.9.4/860-cilk-wchar.patch b/package/gcc/4.9.4/860-cilk-wchar.patch deleted file mode 100644 index 1837405..0000000 --- a/package/gcc/4.9.4/860-cilk-wchar.patch +++ /dev/null @@ -1,56 +0,0 @@ -[PATCH] cilk: fix build without wchar - -When building against uClibc with wchar support disabled, WCHAR_MIN and -WCHAR_MAX are not defined leading to compilation errors. - -Fix it by only including the wchar code if available. - -Signed-off-by: Peter Korsgaard ---- - libcilkrts/include/cilk/reducer_min_max.h | 8 ++++++++ - 1 file changed, 8 insertions(+) - -Index: host-gcc-final-4.9.2/libcilkrts/include/cilk/reducer_min_max.h -=================================================================== ---- host-gcc-final-4.9.2.orig/libcilkrts/include/cilk/reducer_min_max.h -+++ host-gcc-final-4.9.2/libcilkrts/include/cilk/reducer_min_max.h -@@ -3154,7 +3154,9 @@ - CILK_C_REDUCER_MAX_INSTANCE(char, char, CHAR_MIN) - CILK_C_REDUCER_MAX_INSTANCE(unsigned char, uchar, 0) - CILK_C_REDUCER_MAX_INSTANCE(signed char, schar, SCHAR_MIN) -+#ifdef WCHAR_MIN - CILK_C_REDUCER_MAX_INSTANCE(wchar_t, wchar_t, WCHAR_MIN) -+#endif - CILK_C_REDUCER_MAX_INSTANCE(short, short, SHRT_MIN) - CILK_C_REDUCER_MAX_INSTANCE(unsigned short, ushort, 0) - CILK_C_REDUCER_MAX_INSTANCE(int, int, INT_MIN) -@@ -3306,7 +3308,9 @@ - CILK_C_REDUCER_MAX_INDEX_INSTANCE(char, char, CHAR_MIN) - CILK_C_REDUCER_MAX_INDEX_INSTANCE(unsigned char, uchar, 0) - CILK_C_REDUCER_MAX_INDEX_INSTANCE(signed char, schar, SCHAR_MIN) -+#ifdef WCHAR_MIN - CILK_C_REDUCER_MAX_INDEX_INSTANCE(wchar_t, wchar_t, WCHAR_MIN) -+#endif - CILK_C_REDUCER_MAX_INDEX_INSTANCE(short, short, SHRT_MIN) - CILK_C_REDUCER_MAX_INDEX_INSTANCE(unsigned short, ushort, 0) - CILK_C_REDUCER_MAX_INDEX_INSTANCE(int, int, INT_MIN) -@@ -3432,7 +3436,9 @@ - CILK_C_REDUCER_MIN_INSTANCE(char, char, CHAR_MAX) - CILK_C_REDUCER_MIN_INSTANCE(unsigned char, uchar, CHAR_MAX) - CILK_C_REDUCER_MIN_INSTANCE(signed char, schar, SCHAR_MAX) -+#ifdef WCHAR_MAX - CILK_C_REDUCER_MIN_INSTANCE(wchar_t, wchar_t, WCHAR_MAX) -+#endif - CILK_C_REDUCER_MIN_INSTANCE(short, short, SHRT_MAX) - CILK_C_REDUCER_MIN_INSTANCE(unsigned short, ushort, USHRT_MAX) - CILK_C_REDUCER_MIN_INSTANCE(int, int, INT_MAX) -@@ -3584,7 +3590,9 @@ - CILK_C_REDUCER_MIN_INDEX_INSTANCE(char, char, CHAR_MAX) - CILK_C_REDUCER_MIN_INDEX_INSTANCE(unsigned char, uchar, CHAR_MAX) - CILK_C_REDUCER_MIN_INDEX_INSTANCE(signed char, schar, SCHAR_MAX) -+#ifdef WCHAR_MAX - CILK_C_REDUCER_MIN_INDEX_INSTANCE(wchar_t, wchar_t, WCHAR_MAX) -+#endif - CILK_C_REDUCER_MIN_INDEX_INSTANCE(short, short, SHRT_MAX) - CILK_C_REDUCER_MIN_INDEX_INSTANCE(unsigned short, ushort, USHRT_MAX) - CILK_C_REDUCER_MIN_INDEX_INSTANCE(int, int, INT_MAX) diff --git a/package/gcc/4.9.4/870-xtensa-add-mauto-litpools-option.patch b/package/gcc/4.9.4/870-xtensa-add-mauto-litpools-option.patch deleted file mode 100644 index 98c7b3f..0000000 --- a/package/gcc/4.9.4/870-xtensa-add-mauto-litpools-option.patch +++ /dev/null @@ -1,287 +0,0 @@ -From 6d852ffb43b111a39162135c95249e749c4e285b Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Thu, 6 Aug 2015 01:16:02 +0300 -Subject: [PATCH] xtensa: add -mauto-litpools option - -With support from assembler this option allows compiling huge functions, -where single literal pool at the beginning of a function may not be -reachable by L32R instructions at its end. - -Currently assembler --auto-litpools option cannot deal with literals -used from multiple locations separated by more than 256 KBytes of code. -Don't turn constants into literals, instead use MOVI instruction to load -them into registers and let the assembler turn them into literals as -necessary. - -2015-08-12 Max Filippov -gcc/ - * config/xtensa/constraints.md (define_constraint "Y"): New - constraint. - * config/xtensa/elf.h (ASM_SPEC): Add m(no-)auto-litpools. - * config/xtensa/linux.h (ASM_SPEC): Likewise. - * config/xtensa/predicates.md (move_operand): Match constants - and symbols in the presence of TARGET_AUTO_LITPOOLS. - * config/xtensa/xtensa.c (xtensa_valid_move): Don't allow - immediate references to TLS data. - (xtensa_emit_move_sequence): Don't force constants to memory in - the presence of TARGET_AUTO_LITPOOLS. - (print_operand): Add 'y' format, same as default, but capable of - printing SF mode constants as well. - * config/xtensa/xtensa.md (movsi_internal, movhi_internal) - (movsf_internal): Add movi pattern that loads literal. - (movsf, movdf): Don't force constants to memory in the presence - of TARGET_AUTO_LITPOOLS. - (movdf_internal): Add 'Y' constraint. - * config/xtensa/xtensa.opt (mauto-litpools): New option. - -Signed-off-by: Max Filippov ---- -Backported from: r226828 -Changes to ChangeLogs and documentation are dropped. - - gcc/config/xtensa/constraints.md | 5 +++++ - gcc/config/xtensa/elf.h | 4 +++- - gcc/config/xtensa/linux.h | 4 +++- - gcc/config/xtensa/predicates.md | 3 ++- - gcc/config/xtensa/xtensa.c | 19 ++++++++++++++++++- - gcc/config/xtensa/xtensa.md | 35 +++++++++++++++++++---------------- - gcc/config/xtensa/xtensa.opt | 4 ++++ - 7 files changed, 54 insertions(+), 20 deletions(-) - -Index: b/gcc/config/xtensa/constraints.md -=================================================================== ---- a/gcc/config/xtensa/constraints.md -+++ b/gcc/config/xtensa/constraints.md -@@ -111,6 +111,11 @@ - (and (match_code "const_int") - (match_test "xtensa_mask_immediate (ival)"))) - -+(define_constraint "Y" -+ "A constant that can be used in relaxed MOVI instructions." -+ (and (match_code "const_int,const_double,const,symbol_ref,label_ref") -+ (match_test "TARGET_AUTO_LITPOOLS"))) -+ - ;; Memory constraints. Do not use define_memory_constraint here. Doing so - ;; causes reload to force some constants into the constant pool, but since - ;; the Xtensa constant pool can only be accessed with L32R instructions, it -Index: b/gcc/config/xtensa/elf.h -=================================================================== ---- a/gcc/config/xtensa/elf.h -+++ b/gcc/config/xtensa/elf.h -@@ -48,7 +48,9 @@ - %{mtarget-align:--target-align} \ - %{mno-target-align:--no-target-align} \ - %{mlongcalls:--longcalls} \ -- %{mno-longcalls:--no-longcalls}" -+ %{mno-longcalls:--no-longcalls} \ -+ %{mauto-litpools:--auto-litpools} \ -+ %{mno-auto-litpools:--no-auto-litpools}" - - #undef LIB_SPEC - #define LIB_SPEC "-lc -lsim -lc -lhandlers-sim -lhal" -Index: b/gcc/config/xtensa/linux.h -=================================================================== ---- a/gcc/config/xtensa/linux.h -+++ b/gcc/config/xtensa/linux.h -@@ -42,7 +42,9 @@ - %{mtarget-align:--target-align} \ - %{mno-target-align:--no-target-align} \ - %{mlongcalls:--longcalls} \ -- %{mno-longcalls:--no-longcalls}" -+ %{mno-longcalls:--no-longcalls} \ -+ %{mauto-litpools:--auto-litpools} \ -+ %{mno-auto-litpools:--no-auto-litpools}" - - #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1" - -Index: b/gcc/config/xtensa/predicates.md -=================================================================== ---- a/gcc/config/xtensa/predicates.md -+++ b/gcc/config/xtensa/predicates.md -@@ -142,7 +142,8 @@ - (match_test "GET_MODE_CLASS (mode) == MODE_INT - && xtensa_simm12b (INTVAL (op))")) - (and (match_code "const_int,const_double,const,symbol_ref,label_ref") -- (match_test "TARGET_CONST16 && CONSTANT_P (op) -+ (match_test "(TARGET_CONST16 || TARGET_AUTO_LITPOOLS) -+ && CONSTANT_P (op) - && GET_MODE_SIZE (mode) % UNITS_PER_WORD == 0"))))) - - ;; Accept the floating point constant 1 in the appropriate mode. -Index: b/gcc/config/xtensa/xtensa.c -=================================================================== ---- a/gcc/config/xtensa/xtensa.c -+++ b/gcc/config/xtensa/xtensa.c -@@ -477,6 +477,9 @@ - { - int dst_regnum = xt_true_regnum (operands[0]); - -+ if (xtensa_tls_referenced_p (operands[1])) -+ return FALSE; -+ - /* The stack pointer can only be assigned with a MOVSP opcode. */ - if (dst_regnum == STACK_POINTER_REGNUM) - return (mode == SImode -@@ -1044,7 +1047,7 @@ - return 1; - } - -- if (! TARGET_CONST16) -+ if (! TARGET_AUTO_LITPOOLS && ! TARGET_CONST16) - { - src = force_const_mem (SImode, src); - operands[1] = src; -@@ -2428,6 +2431,20 @@ - } - break; - -+ case 'y': -+ if (GET_CODE (x) == CONST_DOUBLE && -+ GET_MODE (x) == SFmode) -+ { -+ REAL_VALUE_TYPE r; -+ long l; -+ REAL_VALUE_FROM_CONST_DOUBLE (r, x); -+ REAL_VALUE_TO_TARGET_SINGLE (r, l); -+ fprintf (file, "0x%08lx", l); -+ break; -+ } -+ -+ /* fall through */ -+ - default: - if (GET_CODE (x) == REG || GET_CODE (x) == SUBREG) - fprintf (file, "%s", reg_names[xt_true_regnum (x)]); -Index: b/gcc/config/xtensa/xtensa.md -=================================================================== ---- a/gcc/config/xtensa/xtensa.md -+++ b/gcc/config/xtensa/xtensa.md -@@ -799,8 +799,8 @@ - }) - - (define_insn "movsi_internal" -- [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,W,a,a,U,*a,*A") -- (match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,i,T,U,r,*A,*r"))] -+ [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,a,W,a,a,U,*a,*A") -+ (match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,Y,i,T,U,r,*A,*r"))] - "xtensa_valid_move (SImode, operands)" - "@ - movi.n\t%0, %x1 -@@ -812,15 +812,16 @@ - mov\t%0, %1 - movsp\t%0, %1 - movi\t%0, %x1 -+ movi\t%0, %1 - const16\t%0, %t1\;const16\t%0, %b1 - %v1l32r\t%0, %1 - %v1l32i\t%0, %1 - %v0s32i\t%1, %0 - rsr\t%0, ACCLO - wsr\t%1, ACCLO" -- [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,load,load,store,rsr,wsr") -+ [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,move,load,load,store,rsr,wsr") - (set_attr "mode" "SI") -- (set_attr "length" "2,2,2,2,2,2,3,3,3,6,3,3,3,3,3")]) -+ (set_attr "length" "2,2,2,2,2,2,3,3,3,3,6,3,3,3,3,3")]) - - ;; 16-bit Integer moves - -@@ -834,21 +835,22 @@ - }) - - (define_insn "movhi_internal" -- [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,U,*a,*A") -- (match_operand:HI 1 "move_operand" "M,d,r,I,U,r,*A,*r"))] -+ [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,a,U,*a,*A") -+ (match_operand:HI 1 "move_operand" "M,d,r,I,Y,U,r,*A,*r"))] - "xtensa_valid_move (HImode, operands)" - "@ - movi.n\t%0, %x1 - mov.n\t%0, %1 - mov\t%0, %1 - movi\t%0, %x1 -+ movi\t%0, %1 - %v1l16ui\t%0, %1 - %v0s16i\t%1, %0 - rsr\t%0, ACCLO - wsr\t%1, ACCLO" -- [(set_attr "type" "move,move,move,move,load,store,rsr,wsr") -+ [(set_attr "type" "move,move,move,move,move,load,store,rsr,wsr") - (set_attr "mode" "HI") -- (set_attr "length" "2,2,3,3,3,3,3,3")]) -+ (set_attr "length" "2,2,3,3,3,3,3,3,3")]) - - ;; 8-bit Integer moves - -@@ -919,7 +921,7 @@ - (match_operand:SF 1 "general_operand" ""))] - "" - { -- if (!TARGET_CONST16 && CONSTANT_P (operands[1])) -+ if (!TARGET_CONST16 && !TARGET_AUTO_LITPOOLS && CONSTANT_P (operands[1])) - operands[1] = force_const_mem (SFmode, operands[1]); - - if ((!register_operand (operands[0], SFmode) -@@ -934,8 +936,8 @@ - }) - - (define_insn "movsf_internal" -- [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,W,a,a,U") -- (match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,iF,T,U,r"))] -+ [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,a,W,a,a,U") -+ (match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,Y,iF,T,U,r"))] - "((register_operand (operands[0], SFmode) - || register_operand (operands[1], SFmode)) - && !(FP_REG_P (xt_true_regnum (operands[0])) -@@ -950,13 +952,14 @@ - mov\t%0, %1 - wfr\t%0, %1 - rfr\t%0, %1 -+ movi\t%0, %y1 - const16\t%0, %t1\;const16\t%0, %b1 - %v1l32r\t%0, %1 - %v1l32i\t%0, %1 - %v0s32i\t%1, %0" -- [(set_attr "type" "farith,fload,fstore,move,load,store,move,farith,farith,move,load,load,store") -+ [(set_attr "type" "farith,fload,fstore,move,load,store,move,farith,farith,move,move,load,load,store") - (set_attr "mode" "SF") -- (set_attr "length" "3,3,3,2,2,2,3,3,3,6,3,3,3")]) -+ (set_attr "length" "3,3,3,2,2,2,3,3,3,3,6,3,3,3")]) - - (define_insn "*lsiu" - [(set (match_operand:SF 0 "register_operand" "=f") -@@ -997,7 +1000,7 @@ - (match_operand:DF 1 "general_operand" ""))] - "" - { -- if (CONSTANT_P (operands[1]) && !TARGET_CONST16) -+ if (CONSTANT_P (operands[1]) && !TARGET_CONST16 && !TARGET_AUTO_LITPOOLS) - operands[1] = force_const_mem (DFmode, operands[1]); - - if (!register_operand (operands[0], DFmode) -@@ -1008,8 +1011,8 @@ - }) - - (define_insn_and_split "movdf_internal" -- [(set (match_operand:DF 0 "nonimmed_operand" "=a,W,a,a,U") -- (match_operand:DF 1 "move_operand" "r,iF,T,U,r"))] -+ [(set (match_operand:DF 0 "nonimmed_operand" "=a,a,W,a,a,U") -+ (match_operand:DF 1 "move_operand" "r,Y,iF,T,U,r"))] - "register_operand (operands[0], DFmode) - || register_operand (operands[1], DFmode)" - "#" -Index: b/gcc/config/xtensa/xtensa.opt -=================================================================== ---- a/gcc/config/xtensa/xtensa.opt -+++ b/gcc/config/xtensa/xtensa.opt -@@ -38,6 +38,10 @@ - Target - Intersperse literal pools with code in the text section - -+mauto-litpools -+Target Report Mask(AUTO_LITPOOLS) -+Relax literals in assembler and place them automatically in the text section -+ - mserialize-volatile - Target Report Mask(SERIALIZE_VOLATILE) - -mno-serialize-volatile Do not serialize volatile memory references with MEMW instructions diff --git a/package/gcc/4.9.4/871-xtensa-reimplement-register-spilling.patch b/package/gcc/4.9.4/871-xtensa-reimplement-register-spilling.patch deleted file mode 100644 index abc7a08..0000000 --- a/package/gcc/4.9.4/871-xtensa-reimplement-register-spilling.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 05154174b369505238b759cf80d595d8cfc8c731 Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Mon, 10 Aug 2015 21:35:20 +0300 -Subject: [PATCH 1/3] xtensa: reimplement register spilling - -Spilling windowed registers in userspace is much easier, more portable, -less error-prone and equally effective as in kernel. Now that register -spilling syscall is considered obsolete in the xtensa linux kernel -replace it with CALL12 followed by series of ENTRY in libgcc. - -2015-08-18 Max Filippov -libgcc/ - * config/xtensa/lib2funcs.S (__xtensa_libgcc_window_spill): Use - CALL12 followed by series of ENTRY to spill windowed registers. - (__xtensa_nonlocal_goto): Call __xtensa_libgcc_window_spill - instead of making linux spill syscall. - -Signed-off-by: Max Filippov ---- -Backported from: r226962 - - libgcc/config/xtensa/lib2funcs.S | 30 +++++++++++++++++++++++------- - 1 file changed, 23 insertions(+), 7 deletions(-) - -diff --git a/libgcc/config/xtensa/lib2funcs.S b/libgcc/config/xtensa/lib2funcs.S -index 3ac8c1d..2e678af 100644 ---- a/libgcc/config/xtensa/lib2funcs.S -+++ b/libgcc/config/xtensa/lib2funcs.S -@@ -33,10 +33,29 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see - .global __xtensa_libgcc_window_spill - .type __xtensa_libgcc_window_spill,@function - __xtensa_libgcc_window_spill: -- entry sp, 32 -- movi a2, 0 -- syscall -+ entry sp, 48 -+#if XCHAL_NUM_AREGS > 16 -+ call12 1f -+ retw -+ .align 4 -+1: -+ .rept (XCHAL_NUM_AREGS - 24) / 12 -+ _entry sp, 48 -+ mov a12, a0 -+ .endr -+ _entry sp, 16 -+#if XCHAL_NUM_AREGS % 12 == 0 -+ mov a4, a4 -+#elif XCHAL_NUM_AREGS % 12 == 4 -+ mov a8, a8 -+#elif XCHAL_NUM_AREGS % 12 == 8 -+ mov a12, a12 -+#endif -+ retw -+#else -+ mov a8, a8 - retw -+#endif - .size __xtensa_libgcc_window_spill, .-__xtensa_libgcc_window_spill - - -@@ -58,10 +77,7 @@ __xtensa_nonlocal_goto: - entry sp, 32 - - /* Flush registers. */ -- mov a5, a2 -- movi a2, 0 -- syscall -- mov a2, a5 -+ call8 __xtensa_libgcc_window_spill - - /* Because the save area for a0-a3 is stored one frame below - the one identified by a2, the only way to restore those --- -1.8.1.4 - diff --git a/package/gcc/4.9.4/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch b/package/gcc/4.9.4/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch deleted file mode 100644 index f23a5c0..0000000 --- a/package/gcc/4.9.4/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch +++ /dev/null @@ -1,33 +0,0 @@ -From f66206679a0ad604f13673559f230160cd3d1189 Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Fri, 14 Aug 2015 02:45:02 +0300 -Subject: [PATCH 2/3] xtensa: use unwind-dw2-fde-dip instead of unwind-dw2-fde - -This allows having exception cleanup code in binaries that don't -register their unwind tables. - -2015-08-18 Max Filippov -libgcc/ - * config/xtensa/t-xtensa (LIB2ADDEH): Replace unwind-dw2-fde - with unwind-dw2-fde-dip. - -Signed-off-by: Max Filippov ---- -Backported from: r226963 - - libgcc/config/xtensa/t-xtensa | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/libgcc/config/xtensa/t-xtensa b/libgcc/config/xtensa/t-xtensa -index 27399e6..66d0eb3 100644 ---- a/libgcc/config/xtensa/t-xtensa -+++ b/libgcc/config/xtensa/t-xtensa -@@ -13,4 +13,4 @@ LIB1ASMFUNCS = _mulsi3 _divsi3 _modsi3 _udivsi3 _umodsi3 \ - LIB2ADD = $(srcdir)/config/xtensa/lib2funcs.S - - LIB2ADDEH = $(srcdir)/config/xtensa/unwind-dw2-xtensa.c \ -- $(srcdir)/unwind-dw2-fde.c $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c -+ $(srcdir)/unwind-dw2-fde-dip.c $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c --- -1.8.1.4 - diff --git a/package/gcc/4.9.4/873-xtensa-fix-_Unwind_GetCFA.patch b/package/gcc/4.9.4/873-xtensa-fix-_Unwind_GetCFA.patch deleted file mode 100644 index dc40513..0000000 --- a/package/gcc/4.9.4/873-xtensa-fix-_Unwind_GetCFA.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 15c7c4d39b317f0d902ef28fd43eca5c3369f891 Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Sat, 15 Aug 2015 05:12:11 +0300 -Subject: [PATCH 3/3] xtensa: fix _Unwind_GetCFA - -Returning context->cfa in _Unwind_GetCFA makes CFA point one stack frame -higher than what was actually used by code at context->ra. This results -in invalid CFA value in signal frames and premature unwinding completion -in forced unwinding used by uClibc NPTL thread cancellation. -Returning context->sp from _Unwind_GetCFA makes all CFA values valid and -matching code that used them. - -2015-08-18 Max Filippov -libgcc/ - * config/xtensa/unwind-dw2-xtensa.c (_Unwind_GetCFA): Return - context->sp instead of context->cfa. - -Signed-off-by: Max Filippov ---- -Backported from: r226964 - - libgcc/config/xtensa/unwind-dw2-xtensa.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/libgcc/config/xtensa/unwind-dw2-xtensa.c b/libgcc/config/xtensa/unwind-dw2-xtensa.c -index 35f7797..ef6b900 100644 ---- a/libgcc/config/xtensa/unwind-dw2-xtensa.c -+++ b/libgcc/config/xtensa/unwind-dw2-xtensa.c -@@ -130,7 +130,7 @@ _Unwind_GetGR (struct _Unwind_Context *context, int index) - _Unwind_Word - _Unwind_GetCFA (struct _Unwind_Context *context) - { -- return (_Unwind_Ptr) context->cfa; -+ return (_Unwind_Ptr) context->sp; - } - - /* Overwrite the saved value for register INDEX in CONTEXT with VAL. */ --- -1.8.1.4 - diff --git a/package/gcc/4.9.4/874-xtensa-add-uclinux-support.patch b/package/gcc/4.9.4/874-xtensa-add-uclinux-support.patch deleted file mode 100644 index 881aec0..0000000 --- a/package/gcc/4.9.4/874-xtensa-add-uclinux-support.patch +++ /dev/null @@ -1,169 +0,0 @@ -From 70c2cb98fb129b4766b5da0f945dc41fd568c77a Mon Sep 17 00:00:00 2001 -From: Max Filippov -Date: Sat, 22 Aug 2015 08:44:26 +0300 -Subject: [PATCH] xtensa: add uclinux support - -2015-10-03 Max Filippov -gcc/ - * config.gcc (xtensa*-*-uclinux*): New configuration. - * config/xtensa/uclinux.h: New file. - * config/xtensa/uclinux.opt: New file. - -libgcc/ - * config.host (xtensa*-*-uclinux*): New configuration. - -Signed-off-by: Max Filippov ---- -Backported from: r228450 - - gcc/config.gcc | 5 ++++ - gcc/config/xtensa/uclinux.h | 69 +++++++++++++++++++++++++++++++++++++++++++ - gcc/config/xtensa/uclinux.opt | 32 ++++++++++++++++++++ - libgcc/config.host | 5 ++++ - 4 files changed, 111 insertions(+) - create mode 100644 gcc/config/xtensa/uclinux.h - create mode 100644 gcc/config/xtensa/uclinux.opt - -Index: b/gcc/config.gcc -=================================================================== ---- a/gcc/config.gcc -+++ b/gcc/config.gcc -@@ -2871,6 +2871,11 @@ - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h" - tmake_file="${tmake_file} xtensa/t-xtensa" - ;; -+xtensa*-*-uclinux*) -+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h" -+ tmake_file="${tmake_file} xtensa/t-xtensa" -+ extra_options="${extra_options} xtensa/uclinux.opt" -+ ;; - am33_2.0-*-linux*) - tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h" - gas=yes gnu_ld=yes -Index: b/gcc/config/xtensa/uclinux.h -=================================================================== ---- /dev/null -+++ b/gcc/config/xtensa/uclinux.h -@@ -0,0 +1,69 @@ -+/* Xtensa uClinux configuration. -+ Derived from the configuration for GCC for Intel i386 running Linux. -+ Copyright (C) 2001-2015 Free Software Foundation, Inc. -+ -+This file is part of GCC. -+ -+GCC is free software; you can redistribute it and/or modify it under -+the terms of the GNU General Public License as published by the Free -+Software Foundation; either version 3, or (at your option) any later -+version. -+ -+GCC is distributed in the hope that it will be useful, but WITHOUT ANY -+WARRANTY; without even the implied warranty of MERCHANTABILITY or -+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+for more details. -+ -+You should have received a copy of the GNU General Public License -+along with GCC; see the file COPYING3. If not see -+. */ -+ -+#undef TARGET_OS_CPP_BUILTINS -+#define TARGET_OS_CPP_BUILTINS() \ -+ do \ -+ { \ -+ GNU_USER_TARGET_OS_CPP_BUILTINS (); \ -+ builtin_define ("__uClinux__"); \ -+ } \ -+ while (0) -+ -+#undef SUBTARGET_CPP_SPEC -+#define SUBTARGET_CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}" -+ -+#undef SIZE_TYPE -+#define SIZE_TYPE "unsigned int" -+ -+#undef PTRDIFF_TYPE -+#define PTRDIFF_TYPE "int" -+ -+#undef WCHAR_TYPE -+#define WCHAR_TYPE "long int" -+ -+#undef WCHAR_TYPE_SIZE -+#define WCHAR_TYPE_SIZE 32 -+ -+#undef ASM_SPEC -+#define ASM_SPEC \ -+ "%{mtext-section-literals:--text-section-literals} \ -+ %{mno-text-section-literals:--no-text-section-literals} \ -+ %{mtarget-align:--target-align} \ -+ %{mno-target-align:--no-target-align} \ -+ %{mlongcalls:--longcalls} \ -+ %{mno-longcalls:--no-longcalls} \ -+ %{mauto-litpools:--auto-litpools} \ -+ %{mno-auto-litpools:--no-auto-litpools}" -+ -+#undef LINK_SPEC -+#define LINK_SPEC "%{!no-elf2flt:%{!elf2flt*:-elf2flt}}" -+ -+#undef LOCAL_LABEL_PREFIX -+#define LOCAL_LABEL_PREFIX "." -+ -+/* Always enable "-fpic" for Xtensa Linux. */ -+#define XTENSA_ALWAYS_PIC 1 -+ -+#undef TARGET_LIBC_HAS_FUNCTION -+#define TARGET_LIBC_HAS_FUNCTION no_c99_libc_has_function -+ -+#undef DBX_REGISTER_NUMBER -+ -Index: b/gcc/config/xtensa/uclinux.opt -=================================================================== ---- /dev/null -+++ b/gcc/config/xtensa/uclinux.opt -@@ -0,0 +1,32 @@ -+; Xtensa uClinux options. -+ -+; Copyright (C) 2015 Free Software Foundation, Inc. -+; -+; This file is part of GCC. -+; -+; GCC is free software; you can redistribute it and/or modify it under -+; the terms of the GNU General Public License as published by the Free -+; Software Foundation; either version 3, or (at your option) any later -+; version. -+; -+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY -+; WARRANTY; without even the implied warranty of MERCHANTABILITY or -+; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+; for more details. -+; -+; You should have received a copy of the GNU General Public License -+; along with GCC; see the file COPYING3. If not see -+; . -+ -+; See the GCC internals manual (options.texi) for a description of -+; this file's format. -+ -+; Please try to keep this file in ASCII collating order. -+ -+elf2flt -+Driver -+ -+elf2flt= -+Driver JoinedOrMissing -+ -+; This comment is to ensure we retain the blank line above. -Index: b/libgcc/config.host -=================================================================== ---- a/libgcc/config.host -+++ b/libgcc/config.host -@@ -1213,6 +1213,11 @@ - tmake_file="$tmake_file xtensa/t-xtensa xtensa/t-linux t-slibgcc-libgcc" - md_unwind_header=xtensa/linux-unwind.h - ;; -+xtensa*-*-uclinux*) -+ tmake_file="$tmake_file xtensa/t-xtensa xtensa/t-linux t-slibgcc-libgcc" -+ md_unwind_header=xtensa/linux-unwind.h -+ extra_parts="$extra_parts crtbeginS.o crtbeginT.o crtendS.o" -+ ;; - am33_2.0-*-linux*) - # Don't need crtbeginT.o from *-*-linux* default. - extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" diff --git a/package/gcc/4.9.4/880-nios2_legitimize_address.patch b/package/gcc/4.9.4/880-nios2_legitimize_address.patch deleted file mode 100644 index 4623f29..0000000 --- a/package/gcc/4.9.4/880-nios2_legitimize_address.patch +++ /dev/null @@ -1,49 +0,0 @@ -From b0ea54f3f995754881e0ea6651133aa7b58eeaa2 Mon Sep 17 00:00:00 2001 -From: cltang -Date: Tue, 22 Sep 2015 12:23:20 +0000 -Subject: [PATCH] nios2_legitimize_address 2015-09-22 Chung-Lin Tang - - - Backport from mainline - 2015-09-22 Chung-Lin Tang - - * config/nios2/nios2.c (nios2_legitimize_address): When handling - 'reg + reloc' cases, allow first operand to be non-REG, and use - force_reg() to enforce address pattern. - -git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/branches/gcc-5-branch@228013 138bc75d-0d04-0410-961f-82ee72b054a4 - -Fixes: -http://autobuild.buildroot.net/results/901/90186d1fe134b804c0101554296b1235dc0ccbb0 - -[backported to 4.9.3] -Signed-off-by: Romain Naour ---- - gcc/config/nios2/nios2.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gcc/config/nios2/nios2.c b/gcc/config/nios2/nios2.c -index 047b615..41dd6f9 100644 ---- a/gcc/config/nios2/nios2.c -+++ b/gcc/config/nios2/nios2.c -@@ -1786,15 +1786,15 @@ nios2_legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED, - - Which will be output as '%tls_le(var+48)(r23)' in assembly. */ - if (GET_CODE (x) == PLUS -- && GET_CODE (XEXP (x, 0)) == REG - && GET_CODE (XEXP (x, 1)) == CONST) - { -- rtx unspec, offset, reg = XEXP (x, 0); -+ rtx unspec, offset; - split_const (XEXP (x, 1), &unspec, &offset); - if (GET_CODE (unspec) == UNSPEC - && !nios2_large_offset_p (XINT (unspec, 1)) - && offset != const0_rtx) - { -+ rtx reg = force_reg (Pmode, XEXP (x, 0)); - unspec = copy_rtx (unspec); - XVECEXP (unspec, 0, 0) - = plus_constant (Pmode, XVECEXP (unspec, 0, 0), INTVAL (offset)); --- -2.5.0 - diff --git a/package/gcc/4.9.4/890-fix-m68k-compile.patch b/package/gcc/4.9.4/890-fix-m68k-compile.patch deleted file mode 100644 index 140977b..0000000 --- a/package/gcc/4.9.4/890-fix-m68k-compile.patch +++ /dev/null @@ -1,15 +0,0 @@ -remove unused header, which breaks the toolchain building - -Signed-off-by: Waldemar Brodkorb - -diff -Nur gcc-4.9.3.orig/libgcc/config/m68k/linux-atomic.c gcc-4.9.3/libgcc/config/m68k/linux-atomic.c ---- gcc-4.9.3.orig/libgcc/config/m68k/linux-atomic.c 2014-01-02 23:25:22.000000000 +0100 -+++ gcc-4.9.3/libgcc/config/m68k/linux-atomic.c 2016-03-18 22:24:40.000000000 +0100 -@@ -33,7 +33,6 @@ - using the kernel helper defined below. There is no support for - 64-bit operations yet. */ - --#include - #include - - #ifndef __NR_atomic_cmpxchg_32 diff --git a/package/gcc/4.9.4/891-fix-m68k-uclinux.patch b/package/gcc/4.9.4/891-fix-m68k-uclinux.patch deleted file mode 100644 index 4347642..0000000 --- a/package/gcc/4.9.4/891-fix-m68k-uclinux.patch +++ /dev/null @@ -1,18 +0,0 @@ -avoids internal compiler error while compiling linux-atomic.c -See here: -https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53833 - -Signed-off-by: Waldemar Brodkorb - -diff -Nur gcc-4.9.3.orig/libgcc/config.host gcc-4.9.3/libgcc/config.host ---- gcc-4.9.3.orig/libgcc/config.host 2014-03-27 16:40:31.000000000 +0100 -+++ gcc-4.9.3/libgcc/config.host 2016-04-05 16:20:53.422809885 +0200 -@@ -750,7 +750,7 @@ - m68k*-*-openbsd*) - ;; - m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc -- tmake_file="$tmake_file m68k/t-floatlib m68k/t-linux" -+ tmake_file="$tmake_file m68k/t-floatlib" - md_unwind_header=m68k/linux-unwind.h - ;; - m68k-*-linux*) # Motorola m68k's running GNU/Linux diff --git a/package/gcc/4.9.4/900-musl-support.patch b/package/gcc/4.9.4/900-musl-support.patch deleted file mode 100644 index a862d01..0000000 --- a/package/gcc/4.9.4/900-musl-support.patch +++ /dev/null @@ -1,640 +0,0 @@ -Add musl support to gcc - -This patch comes from the musl-cross project at -https://bitbucket.org/GregorR/musl-cross/src. Compared to the upstream version: - - * the config.sub modifications have been removed, because Buildroot - already overwrites all config.sub with a more recent config.sub - that has musl support. - - * change to ensure that a dummy dynamic linker path - MUSL_DYNAMIC_LINKER is defined for all architectures, - otherwise building gcc for architectures not supported by musl was - causing build failure. Bug reported upstream at - https://bitbucket.org/GregorR/musl-gcc-patches/issue/4/musl-gcc-patches-break-the-build-on. - - * change the USE_PT_GNU_EH_FRAME logic to keep the existing gcc logic - and only add the musl one as an addition, not as a replacement. Not - doing this breaks C++ exception handling with glibc, because - USE_PT_GNU_EH_FRAME doesn't get defined due to the configure script - not testing dl_iterate_phdr() on any system except Solaris. - -[Gustavo: remove upstream applied gcc/config/sh/sh.c chunk for 4.9.1] -Signed-off-by: Thomas Petazzoni ---- - -Index: b/fixincludes/mkfixinc.sh -=================================================================== ---- a/fixincludes/mkfixinc.sh -+++ b/fixincludes/mkfixinc.sh -@@ -19,7 +19,8 @@ - powerpc-*-eabi* | \ - powerpc-*-rtems* | \ - powerpcle-*-eabisim* | \ -- powerpcle-*-eabi* ) -+ powerpcle-*-eabi* | \ -+ *-musl* ) - # IF there is no include fixing, - # THEN create a no-op fixer and exit - (echo "#! /bin/sh" ; echo "exit 0" ) > ${target} -Index: b/gcc/config.gcc -=================================================================== ---- a/gcc/config.gcc -+++ b/gcc/config.gcc -@@ -594,7 +594,7 @@ - esac - - # Common C libraries. --tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3" -+tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4" - - # 32-bit x86 processors supported by --with-arch=. Each processor - # MUST be separated by exactly one space. -@@ -719,6 +719,9 @@ - *-*-*uclibc*) - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" - ;; -+ *-*-*musl*) -+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL" -+ ;; - *) - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" - ;; -@@ -2338,6 +2341,10 @@ - powerpc*-*-linux*paired*) - tm_file="${tm_file} rs6000/750cl.h" ;; - esac -+ case ${target} in -+ *-linux*-musl*) -+ enable_secureplt=yes ;; -+ esac - if test x${enable_secureplt} = xyes; then - tm_file="rs6000/secureplt.h ${tm_file}" - fi -Index: b/gcc/config/aarch64/aarch64-linux.h -=================================================================== ---- a/gcc/config/aarch64/aarch64-linux.h -+++ b/gcc/config/aarch64/aarch64-linux.h -@@ -22,6 +22,8 @@ - #define GCC_AARCH64_LINUX_H - - #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-aarch64%{mbig-endian:_be}.so.1" -+#undef MUSL_DYNAMIC_LINKER -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-aarch64.so.1" - - #define CPP_SPEC "%{pthread:-D_REENTRANT}" - -Index: b/gcc/config/arm/linux-eabi.h -=================================================================== ---- a/gcc/config/arm/linux-eabi.h -+++ b/gcc/config/arm/linux-eabi.h -@@ -77,6 +77,23 @@ - %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \ - %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}" - -+/* For ARM musl currently supports four dynamic linkers: -+ - ld-musl-arm.so.1 - for the EABI-derived soft-float ABI -+ - ld-musl-armhf.so.1 - for the EABI-derived hard-float ABI -+ - ld-musl-armeb.so.1 - for the EABI-derived soft-float ABI, EB -+ - ld-musl-armebhf.so.1 - for the EABI-derived hard-float ABI, EB -+ musl does not support the legacy OABI mode. -+ All the dynamic linkers live in /lib. -+ We default to soft-float, EL. */ -+#undef MUSL_DYNAMIC_LINKER -+#if TARGET_BIG_ENDIAN_DEFAULT -+#define MUSL_DYNAMIC_LINKER_E "%{mlittle-endian:;:eb}" -+#else -+#define MUSL_DYNAMIC_LINKER_E "%{mbig-endian:eb}" -+#endif -+#define MUSL_DYNAMIC_LINKER \ -+ "/lib/ld-musl-arm" MUSL_DYNAMIC_LINKER_E "%{mfloat-abi=hard:hf}.so.1" -+ - /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to - use the GNU/Linux version, not the generic BPABI version. */ - #undef LINK_SPEC -Index: b/gcc/config/i386/linux.h -=================================================================== ---- a/gcc/config/i386/linux.h -+++ b/gcc/config/i386/linux.h -@@ -21,3 +21,5 @@ - - #define GNU_USER_LINK_EMULATION "elf_i386" - #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2" -+#undef MUSL_DYNAMIC_LINKER -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-i386.so.1" -Index: b/gcc/config/i386/linux64.h -=================================================================== ---- a/gcc/config/i386/linux64.h -+++ b/gcc/config/i386/linux64.h -@@ -30,3 +30,10 @@ - #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2" - #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2" - #define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2" -+ -+#undef MUSL_DYNAMIC_LINKER32 -+#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-i386.so.1" -+#undef MUSL_DYNAMIC_LINKER64 -+#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-x86_64.so.1" -+#undef MUSL_DYNAMIC_LINKERX32 -+#define MUSL_DYNAMIC_LINKERX32 "/lib/ld-musl-x32.so.1" -Index: b/gcc/config/linux.h -=================================================================== ---- a/gcc/config/linux.h -+++ b/gcc/config/linux.h -@@ -32,10 +32,12 @@ - #define OPTION_GLIBC (DEFAULT_LIBC == LIBC_GLIBC) - #define OPTION_UCLIBC (DEFAULT_LIBC == LIBC_UCLIBC) - #define OPTION_BIONIC (DEFAULT_LIBC == LIBC_BIONIC) -+#define OPTION_MUSL (DEFAULT_LIBC == LIBC_MUSL) - #else - #define OPTION_GLIBC (linux_libc == LIBC_GLIBC) - #define OPTION_UCLIBC (linux_libc == LIBC_UCLIBC) - #define OPTION_BIONIC (linux_libc == LIBC_BIONIC) -+#define OPTION_MUSL (linux_libc == LIBC_MUSL) - #endif - - #define GNU_USER_TARGET_OS_CPP_BUILTINS() \ -@@ -53,18 +55,21 @@ - uClibc or Bionic is the default C library and whether - -muclibc or -mglibc or -mbionic has been passed to change the default. */ - --#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LD1, LD2, LD3) \ -- "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:" LD1 "}}" -+#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LIBC4, LD1, LD2, LD3, LD4) \ -+ "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}" - - #if DEFAULT_LIBC == LIBC_GLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U, B) \ -- CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", G, U, B) -+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \ -+ CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", "mmusl", G, U, B, M) - #elif DEFAULT_LIBC == LIBC_UCLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U, B) \ -- CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", U, G, B) -+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \ -+ CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", "mmusl", U, G, B, M) - #elif DEFAULT_LIBC == LIBC_BIONIC --#define CHOOSE_DYNAMIC_LINKER(G, U, B) \ -- CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", B, G, U) -+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \ -+ CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", "mmusl", B, G, U, M) -+#elif DEFAULT_LIBC == LIBC_MUSL -+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \ -+ CHOOSE_DYNAMIC_LINKER1 ("mmusl", "mglibc", "muclibc", "mbionic", M, G, U, B) - #else - #error "Unsupported DEFAULT_LIBC" - #endif /* DEFAULT_LIBC */ -@@ -82,23 +87,103 @@ - #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64" - #define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32" - -+/* Musl dynamic linker paths must be defined on a per-architecture -+ basis, for each architecture supported by Musl. However, in order -+ to let other architectures continue to build with other C -+ libraries, we provide a dummy definition of the following defines. */ -+#define MUSL_DYNAMIC_LINKER "invalid" -+#define MUSL_DYNAMIC_LINKER32 "invalid" -+#define MUSL_DYNAMIC_LINKER64 "invalid" -+#define MUSL_DYNAMIC_LINKERX32 "invalid" -+ - #define GNU_USER_DYNAMIC_LINKER \ - CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, \ -- BIONIC_DYNAMIC_LINKER) -+ BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER) - #define GNU_USER_DYNAMIC_LINKER32 \ - CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, \ -- BIONIC_DYNAMIC_LINKER32) -+ BIONIC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32) - #define GNU_USER_DYNAMIC_LINKER64 \ - CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \ -- BIONIC_DYNAMIC_LINKER64) -+ BIONIC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64) - #define GNU_USER_DYNAMIC_LINKERX32 \ - CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \ -- BIONIC_DYNAMIC_LINKERX32) -+ BIONIC_DYNAMIC_LINKERX32, MUSL_DYNAMIC_LINKER32) - - /* Whether we have Bionic libc runtime */ - #undef TARGET_HAS_BIONIC - #define TARGET_HAS_BIONIC (OPTION_BIONIC) - -+/* musl avoids problematic includes by rearranging the include directories. -+ * Unfortunately, this is mostly duplicated from cppdefault.c */ -+#if DEFAULT_LIBC == LIBC_MUSL -+#define INCLUDE_DEFAULTS_MUSL_GPP \ -+ { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \ -+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \ -+ { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \ -+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \ -+ { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \ -+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, -+ -+#ifdef LOCAL_INCLUDE_DIR -+#define INCLUDE_DEFAULTS_MUSL_LOCAL \ -+ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \ -+ { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 }, -+#else -+#define INCLUDE_DEFAULTS_MUSL_LOCAL -+#endif -+ -+#ifdef PREFIX_INCLUDE_DIR -+#define INCLUDE_DEFAULTS_MUSL_PREFIX \ -+ { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0}, -+#else -+#define INCLUDE_DEFAULTS_MUSL_PREFIX -+#endif -+ -+#ifdef CROSS_INCLUDE_DIR -+#define INCLUDE_DEFAULTS_MUSL_CROSS \ -+ { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0}, -+#else -+#define INCLUDE_DEFAULTS_MUSL_CROSS -+#endif -+ -+#ifdef TOOL_INCLUDE_DIR -+#define INCLUDE_DEFAULTS_MUSL_TOOL \ -+ { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0}, -+#else -+#define INCLUDE_DEFAULTS_MUSL_TOOL -+#endif -+ -+#ifdef NATIVE_SYSTEM_HEADER_DIR -+#define INCLUDE_DEFAULTS_MUSL_NATIVE \ -+ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \ -+ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 }, -+#else -+#define INCLUDE_DEFAULTS_MUSL_NATIVE -+#endif -+ -+#if defined (CROSS_DIRECTORY_STRUCTURE) && !defined (TARGET_SYSTEM_ROOT) -+# undef INCLUDE_DEFAULTS_MUSL_LOCAL -+# define INCLUDE_DEFAULTS_MUSL_LOCAL -+# undef INCLUDE_DEFAULTS_MUSL_NATIVE -+# define INCLUDE_DEFAULTS_MUSL_NATIVE -+#else -+# undef INCLUDE_DEFAULTS_MUSL_CROSS -+# define INCLUDE_DEFAULTS_MUSL_CROSS -+#endif -+ -+#undef INCLUDE_DEFAULTS -+#define INCLUDE_DEFAULTS \ -+ { \ -+ INCLUDE_DEFAULTS_MUSL_GPP \ -+ INCLUDE_DEFAULTS_MUSL_PREFIX \ -+ INCLUDE_DEFAULTS_MUSL_CROSS \ -+ INCLUDE_DEFAULTS_MUSL_TOOL \ -+ INCLUDE_DEFAULTS_MUSL_NATIVE \ -+ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \ -+ { 0, 0, 0, 0, 0, 0 } \ -+ } -+#endif -+ - #if (DEFAULT_LIBC == LIBC_UCLIBC) && defined (SINGLE_LIBC) /* uClinux */ - /* This is a *uclinux* target. We don't define below macros to normal linux - versions, because doing so would require *uclinux* targets to include -Index: b/gcc/config/linux.opt -=================================================================== ---- a/gcc/config/linux.opt -+++ b/gcc/config/linux.opt -@@ -30,3 +30,7 @@ - muclibc - Target Report RejectNegative Var(linux_libc,LIBC_UCLIBC) Negative(mbionic) - Use uClibc C library -+ -+mmusl -+Target Report RejectNegative Var(linux_libc,LIBC_MUSL) Negative(mglibc) -+Use musl C library -Index: b/gcc/config/microblaze/linux.h -=================================================================== ---- a/gcc/config/microblaze/linux.h -+++ b/gcc/config/microblaze/linux.h -@@ -28,7 +28,23 @@ - #undef TLS_NEEDS_GOT - #define TLS_NEEDS_GOT 1 - --#define DYNAMIC_LINKER "/lib/ld.so.1" -+#if TARGET_BIG_ENDIAN_DEFAULT == 0 /* LE */ -+#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}" -+#else -+#define MUSL_DYNAMIC_LINKER_E "%{EL:el}" -+#endif -+ -+#undef MUSL_DYNAMIC_LINKER -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-microblaze" MUSL_DYNAMIC_LINKER_E ".so.1" -+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1" -+ -+#if DEFAULT_LIBC == LIBC_MUSL -+#define DYNAMIC_LINKER MUSL_DYNAMIC_LINKER -+#else -+#define DYNAMIC_LINKER GLIBC_DYNAMIC_LINKER -+#endif -+ -+ - #undef SUBTARGET_EXTRA_SPECS - #define SUBTARGET_EXTRA_SPECS \ - { "dynamic_linker", DYNAMIC_LINKER } -Index: b/gcc/config/rs6000/linux64.h -=================================================================== ---- a/gcc/config/rs6000/linux64.h -+++ b/gcc/config/rs6000/linux64.h -@@ -371,17 +371,23 @@ - #endif - #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0" - #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0" -+#undef MUSL_DYNAMIC_LINKER32 -+#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-powerpc.so.1" -+#undef MUSL_DYNAMIC_LINKER64 -+#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-powerpc64.so.1" - #if DEFAULT_LIBC == LIBC_UCLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}" -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}" - #elif DEFAULT_LIBC == LIBC_GLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}" -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}" -+#elif DEFAULT_LIBC == LIBC_MUSL -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}" - #else - #error "Unsupported DEFAULT_LIBC" - #endif - #define GNU_USER_DYNAMIC_LINKER32 \ -- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32) -+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32) - #define GNU_USER_DYNAMIC_LINKER64 \ -- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64) -+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64) - - #undef DEFAULT_ASM_ENDIAN - #if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN) -Index: b/gcc/config/rs6000/secureplt.h -=================================================================== ---- a/gcc/config/rs6000/secureplt.h -+++ b/gcc/config/rs6000/secureplt.h -@@ -18,3 +18,4 @@ - . */ - - #define CC1_SECURE_PLT_DEFAULT_SPEC "-msecure-plt" -+#define LINK_SECURE_PLT_DEFAULT_SPEC "--secure-plt" -Index: b/gcc/config/rs6000/sysv4.h -=================================================================== ---- a/gcc/config/rs6000/sysv4.h -+++ b/gcc/config/rs6000/sysv4.h -@@ -537,6 +537,9 @@ - #ifndef CC1_SECURE_PLT_DEFAULT_SPEC - #define CC1_SECURE_PLT_DEFAULT_SPEC "" - #endif -+#ifndef LINK_SECURE_PLT_DEFAULT_SPEC -+#define LINK_SECURE_PLT_DEFAULT_SPEC "" -+#endif - - /* Pass -G xxx to the compiler. */ - #define CC1_SPEC "%{G*} %(cc1_cpu)" \ -@@ -585,7 +588,8 @@ - - /* Override the default target of the linker. */ - #define LINK_TARGET_SPEC \ -- ENDIAN_SELECT("", " --oformat elf32-powerpcle", "") -+ ENDIAN_SELECT("", " --oformat elf32-powerpcle", "") \ -+ "%{!mbss-plt: %{!msecure-plt: %(link_secure_plt_default)}}" - - /* Any specific OS flags. */ - #define LINK_OS_SPEC "\ -@@ -763,15 +767,18 @@ - - #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1" - #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0" -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-powerpc.so.1" - #if DEFAULT_LIBC == LIBC_UCLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}" -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}" -+#elif DEFAULT_LIBC == LIBC_MUSL -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}" - #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC --#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}" -+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}" - #else - #error "Unsupported DEFAULT_LIBC" - #endif - #define GNU_USER_DYNAMIC_LINKER \ -- CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER) -+ CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER) - - #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \ - %{rdynamic:-export-dynamic} \ -@@ -894,6 +901,7 @@ - { "link_os_openbsd", LINK_OS_OPENBSD_SPEC }, \ - { "link_os_default", LINK_OS_DEFAULT_SPEC }, \ - { "cc1_secure_plt_default", CC1_SECURE_PLT_DEFAULT_SPEC }, \ -+ { "link_secure_plt_default", LINK_SECURE_PLT_DEFAULT_SPEC }, \ - { "cpp_os_ads", CPP_OS_ADS_SPEC }, \ - { "cpp_os_yellowknife", CPP_OS_YELLOWKNIFE_SPEC }, \ - { "cpp_os_mvme", CPP_OS_MVME_SPEC }, \ -Index: b/gcc/config/sh/linux.h -=================================================================== ---- a/gcc/config/sh/linux.h -+++ b/gcc/config/sh/linux.h -@@ -43,7 +43,15 @@ - - #define TARGET_ASM_FILE_END file_end_indicate_exec_stack - -+#if TARGET_BIG_ENDIAN_DEFAULT /* BE */ -+#define MUSL_DYNAMIC_LINKER_E "eb" -+#else -+#define MUSL_DYNAMIC_LINKER_E -+#endif -+ - #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2" -+#undef MUSL_DYNAMIC_LINKER -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-sh" MUSL_DYNAMIC_LINKER_E ".so.1" - - #undef SUBTARGET_LINK_EMUL_SUFFIX - #define SUBTARGET_LINK_EMUL_SUFFIX "_linux" -Index: b/gcc/configure -=================================================================== ---- a/gcc/configure -+++ b/gcc/configure -@@ -27601,6 +27601,9 @@ - gcc_cv_target_dl_iterate_phdr=no - fi - ;; -+ *-linux-musl*) -+ gcc_cv_target_dl_iterate_phdr=yes -+ ;; - esac - - if test x$gcc_cv_target_dl_iterate_phdr = xyes; then -Index: b/gcc/configure.ac -=================================================================== ---- a/gcc/configure.ac -+++ b/gcc/configure.ac -@@ -5173,6 +5173,9 @@ - gcc_cv_target_dl_iterate_phdr=no - fi - ;; -+ *-linux-musl*) -+ gcc_cv_target_dl_iterate_phdr=yes -+ ;; - esac - GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR]) - if test x$gcc_cv_target_dl_iterate_phdr = xyes; then -Index: b/gcc/ginclude/stddef.h -=================================================================== ---- a/gcc/ginclude/stddef.h -+++ b/gcc/ginclude/stddef.h -@@ -181,6 +181,7 @@ - #ifndef _GCC_SIZE_T - #ifndef _SIZET_ - #ifndef __size_t -+#ifndef __DEFINED_size_t /* musl */ - #define __size_t__ /* BeOS */ - #define __SIZE_T__ /* Cray Unicos/Mk */ - #define _SIZE_T -@@ -197,6 +198,7 @@ - #define ___int_size_t_h - #define _GCC_SIZE_T - #define _SIZET_ -+#define __DEFINED_size_t /* musl */ - #if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \ - || defined(__FreeBSD_kernel__) - /* __size_t is a typedef on FreeBSD 5, must not trash it. */ -@@ -214,6 +216,7 @@ - typedef long ssize_t; - #endif /* __BEOS__ */ - #endif /* !(defined (__GNUG__) && defined (size_t)) */ -+#endif /* __DEFINED_size_t */ - #endif /* __size_t */ - #endif /* _SIZET_ */ - #endif /* _GCC_SIZE_T */ -Index: b/libgcc/unwind-dw2-fde-dip.c -=================================================================== ---- a/libgcc/unwind-dw2-fde-dip.c -+++ b/libgcc/unwind-dw2-fde-dip.c -@@ -73,6 +73,13 @@ - && defined(TARGET_DL_ITERATE_PHDR) \ - && defined(__sun__) && defined(__svr4__) - # define USE_PT_GNU_EH_FRAME -+ #endif -+ -+/* For musl libc, TARGET_DL_ITERATE_PHDR gets defined by the configure -+ script. */ -+#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \ -+ && defined(TARGET_DL_ITERATE_PHDR) -+# define USE_PT_GNU_EH_FRAME - #endif - - #if defined(USE_PT_GNU_EH_FRAME) -Index: b/libgomp/config/posix/time.c -=================================================================== ---- a/libgomp/config/posix/time.c -+++ b/libgomp/config/posix/time.c -@@ -28,6 +28,8 @@ - The following implementation uses the most simple POSIX routines. - If present, POSIX 4 clocks should be used instead. */ - -+#define _POSIX_C_SOURCE 199309L /* for clocks */ -+ - #include "libgomp.h" - #include - #if TIME_WITH_SYS_TIME -Index: b/libitm/config/arm/hwcap.cc -=================================================================== ---- a/libitm/config/arm/hwcap.cc -+++ b/libitm/config/arm/hwcap.cc -@@ -40,7 +40,11 @@ - - #ifdef __linux__ - #include -+#ifdef __GLIBC__ - #include -+#else -+#include -+#endif - #include - - static void __attribute__((constructor)) -Index: b/libitm/config/linux/x86/tls.h -=================================================================== ---- a/libitm/config/linux/x86/tls.h -+++ b/libitm/config/linux/x86/tls.h -@@ -25,16 +25,19 @@ - #ifndef LIBITM_X86_TLS_H - #define LIBITM_X86_TLS_H 1 - --#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10) -+#if defined(__GLIBC_PREREQ) -+#if __GLIBC_PREREQ(2, 10) - /* Use slots in the TCB head rather than __thread lookups. - GLIBC has reserved words 10 through 13 for TM. */ - #define HAVE_ARCH_GTM_THREAD 1 - #define HAVE_ARCH_GTM_THREAD_DISP 1 - #endif -+#endif - - #include "config/generic/tls.h" - --#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10) -+#if defined(__GLIBC_PREREQ) -+#if __GLIBC_PREREQ(2, 10) - namespace GTM HIDDEN { - - #ifdef __x86_64__ -@@ -101,5 +104,6 @@ - - } // namespace GTM - #endif /* >= GLIBC 2.10 */ -+#endif - - #endif // LIBITM_X86_TLS_H -Index: b/libstdc++-v3/configure.host -=================================================================== ---- a/libstdc++-v3/configure.host -+++ b/libstdc++-v3/configure.host -@@ -266,6 +266,13 @@ - os_include_dir="os/bsd/freebsd" - ;; - gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu) -+ # check for musl by target -+ case "${host_os}" in -+ *-musl*) -+ os_include_dir="os/generic" -+ ;; -+ *) -+ - if [ "$uclibc" = "yes" ]; then - os_include_dir="os/uclibc" - elif [ "$bionic" = "yes" ]; then -@@ -274,6 +281,9 @@ - os_include_dir="os/gnu-linux" - fi - ;; -+ -+ esac -+ ;; - hpux*) - os_include_dir="os/hpux" - ;; -Index: b/gcc/config/mips/linux64.h -=================================================================== ---- a/gcc/config/mips/linux64.h -+++ b/gcc/config/mips/linux64.h -@@ -41,4 +41,4 @@ - #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32" - #define GNU_USER_DYNAMIC_LINKERN32 \ - CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERN32, UCLIBC_DYNAMIC_LINKERN32, \ -- BIONIC_DYNAMIC_LINKERN32) -+ BIONIC_DYNAMIC_LINKERN32, MUSL_DYNAMIC_LINKER) -Index: b/gcc/config/mips/linux.h -=================================================================== ---- a/gcc/config/mips/linux.h -+++ b/gcc/config/mips/linux.h -@@ -23,3 +23,11 @@ - #undef UCLIBC_DYNAMIC_LINKER - #define UCLIBC_DYNAMIC_LINKER \ - "%{mnan=2008:/lib/ld-uClibc-mipsn8.so.0;:/lib/ld-uClibc.so.0}" -+ -+#if TARGET_ENDIAN_DEFAULT == 0 /* LE */ -+#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}" -+#else -+#define MUSL_DYNAMIC_LINKER_E "%{EL:el}" -+#endif -+#undef MUSL_DYNAMIC_LINKER -+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-mips" MUSL_DYNAMIC_LINKER_E "%{msoft-float:-sf}.so.1" diff --git a/package/gcc/4.9.4/901-microblaze-uclibc.patch b/package/gcc/4.9.4/901-microblaze-uclibc.patch deleted file mode 100644 index 82c44e1..0000000 --- a/package/gcc/4.9.4/901-microblaze-uclibc.patch +++ /dev/null @@ -1,21 +0,0 @@ -Add dynamic linker support for uClibc - -Signed-off-by: Waldemar Brodkorb - -diff -Nur gcc-4.9.3.orig/gcc/config/microblaze/linux.h gcc-4.9.3/gcc/config/microblaze/linux.h ---- gcc-4.9.3.orig/gcc/config/microblaze/linux.h 2016-06-04 21:21:09.430646655 +0200 -+++ gcc-4.9.3/gcc/config/microblaze/linux.h 2016-06-04 21:21:44.596003509 +0200 -@@ -36,10 +36,13 @@ - - #undef MUSL_DYNAMIC_LINKER - #define MUSL_DYNAMIC_LINKER "/lib/ld-musl-microblaze" MUSL_DYNAMIC_LINKER_E ".so.1" -+#define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0" - #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1" - - #if DEFAULT_LIBC == LIBC_MUSL - #define DYNAMIC_LINKER MUSL_DYNAMIC_LINKER -+#elif DEFAULT_LIBC == LIBC_UCLIBC -+#define DYNAMIC_LINKER UCLIBC_DYNAMIC_LINKER - #else - #define DYNAMIC_LINKER GLIBC_DYNAMIC_LINKER - #endif diff --git a/package/gcc/4.9.4/930-libgcc-disable-split-stack-nothreads.patch b/package/gcc/4.9.4/930-libgcc-disable-split-stack-nothreads.patch deleted file mode 100644 index 670cf8d..0000000 --- a/package/gcc/4.9.4/930-libgcc-disable-split-stack-nothreads.patch +++ /dev/null @@ -1,14 +0,0 @@ -disable split-stack for non-thread builds - -Signed-off-by: Waldemar Brodkorb - -diff -Nur gcc-4.9.3.orig/libgcc/config/t-stack gcc-4.9.3/libgcc/config/t-stack ---- gcc-4.9.3.orig/libgcc/config/t-stack 2010-10-01 21:31:49.000000000 +0200 -+++ gcc-4.9.3/libgcc/config/t-stack 2016-03-07 01:34:32.000000000 +0100 -@@ -1,4 +1,6 @@ - # Makefile fragment to provide generic support for -fsplit-stack. - # This should be used in config.host for any host which supports - # -fsplit-stack. -+ifeq ($(enable_threads),yes) - LIB2ADD_ST += $(srcdir)/generic-morestack.c $(srcdir)/generic-morestack-thread.c -+endif diff --git a/package/gcc/4.9.4/940-uclinux-enable-threads.patch b/package/gcc/4.9.4/940-uclinux-enable-threads.patch deleted file mode 100644 index 5108147..0000000 --- a/package/gcc/4.9.4/940-uclinux-enable-threads.patch +++ /dev/null @@ -1,20 +0,0 @@ -Enable POSIX threads for uClinux targets -Reported upstream: -https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71721 - -Signed-off-by: Waldemar Brodkorb - -Index: b/gcc/config.gcc -=================================================================== ---- a/gcc/config.gcc -+++ b/gcc/config.gcc -@@ -810,6 +810,9 @@ - *-*-uclinux*) - extra_options="$extra_options gnu-user.opt" - use_gcc_stdint=wrap -+ case ${enable_threads} in -+ "" | yes | posix) thread_file='posix' ;; -+ esac - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC" - ;; - *-*-rdos*) diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host index 4c1d64c..7d6aab7 100644 --- a/package/gcc/Config.in.host +++ b/package/gcc/Config.in.host @@ -20,27 +20,6 @@ config BR2_GCC_VERSION_OR1K depends on BR2_or1k select BR2_TOOLCHAIN_GCC_AT_LEAST_5 -config BR2_GCC_VERSION_4_9_X - bool "gcc 4.9.x" - # Broken or unsupported architectures - depends on !BR2_arc && !BR2_bfin && !BR2_or1k - # Broken or unsupported ARM cores - depends on !BR2_cortex_a17 && !BR2_cortex_a72 - # Unsupported MIPS cores - depends on !BR2_mips_interaptiv - # Unsupported for MIPS R5 - depends on !BR2_MIPS_CPU_MIPS32R5 && !BR2_MIPS_CPU_MIPS64R5 - # Unsupported for MIPS R6 - depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6 - # musl microblaze unsupported - depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_microblazeel || BR2_microblazebe)) - # musl ppc64 unsupported - depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64le)) - # musl mips64 unsupported - depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_mips64 || BR2_mips64el)) - # PR60102 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60102 - select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 - config BR2_GCC_VERSION_5_X bool "gcc 5.x" # Broken or unsupported architectures @@ -89,7 +68,6 @@ config BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE config BR2_GCC_VERSION string - default "4.9.4" if BR2_GCC_VERSION_4_9_X default "5.4.0" if BR2_GCC_VERSION_5_X default "6.3.0" if BR2_GCC_VERSION_6_X default "7.1.0" if BR2_GCC_VERSION_7_X diff --git a/package/gcc/gcc.hash b/package/gcc/gcc.hash index 7a37bb6..c74679c 100644 --- a/package/gcc/gcc.hash +++ b/package/gcc/gcc.hash @@ -1,5 +1,3 @@ -# From ftp://gcc.gnu.org/pub/gcc/releases/gcc-4.9.4/sha512.sum -sha512 93abb78e16277454f41a8e9810f41f66c0fdffdc539a762ff6b67d3037f78db971378683fd2ebf707d1d51c059fad2161fe42d110c330027f40214b7db0f3efe gcc-4.9.4.tar.bz2 # From ftp://gcc.gnu.org/pub/gcc/releases/gcc-5.4.0/sha512.sum sha512 2941cc950c8f2409a314df497631f9b0266211aa74746c1839c46e04f1c7c299afe2528d1ef16ea39def408a644ba48f97519ec7a7dd37d260c3e9423514265b gcc-5.4.0.tar.bz2 # From ftp://gcc.gnu.org/pub/gcc/releases/gcc-6.3.0/sha512.sum