diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/pkg-toolchain-external.mk
similarity index 62%
copy from toolchain/toolchain-external/toolchain-external.mk
copy to toolchain/toolchain-external/pkg-toolchain-external.mk
index 180a63d..583b0d6 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/pkg-toolchain-external.mk
@@ -1,16 +1,12 @@
 ################################################################################
+# External toolchain package infrastructure
 #
-# toolchain-external
-#
-################################################################################
-
-#
-# This package implements the support for external toolchains, i.e
-# toolchains that are available pre-built, ready to use. Such toolchain
-# may either be readily available on the Web (Linaro, Sourcery
-# CodeBench, from processor vendors) or may be built with tools like
-# Crosstool-NG or Buildroot itself. So far, we have tested this
-# with:
+# This package infrastructure implements the support for external
+# toolchains, i.e toolchains that are available pre-built, ready to
+# use. Such toolchain may either be readily available on the Web
+# (Linaro, Sourcery CodeBench, from processor vendors) or may be built
+# with tools like Crosstool-NG or Buildroot itself. So far, we have
+# tested this with:
 #
 #  * Toolchains generated by Crosstool-NG
 #  * Toolchains generated by Buildroot
@@ -62,6 +58,7 @@
 #  This toolchain wrapper and symlinks are installed into
 #  $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
 #  of Buildroot is handled identical for the 2 toolchain types.
+################################################################################
 
 #
 # Definitions of where the toolchain can be found
@@ -571,272 +568,3 @@ define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
 		ln -sf ld64-uClibc.so.1 $(TARGET_DIR)/lib/ld64-uClibc.so.0 ; \
 	fi
 endef
-
-TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
-TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
-
-# In fact, we don't need to download the toolchain, since it is already
-# available on the system, so force the site and source to be empty so
-# that nothing will be downloaded/extracted.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y)
-TOOLCHAIN_EXTERNAL_SITE =
-TOOLCHAIN_EXTERNAL_SOURCE =
-endif
-
-# The Codescape toolchain uses a sysroot layout that places them
-# side-by-side instead of nested like multilibs. A symlink is needed
-# much like for the nested sysroots which are handled in
-# copy_toolchain_sysroot but there is not enough information in there
-# to determine whether the sysroot layout was nested or side-by-side.
-# Add the symlink here for now.
-define TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK
-	$(Q)ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))"; \
-	ARCH_SUBDIR=`basename $${ARCH_SYSROOT_DIR}`; \
-	ln -snf . $(STAGING_DIR)/$${ARCH_SUBDIR}
-endef
-
-# Special fixup for Codescape MIPS toolchains, that have bin-<abi> and
-# sbin-<abi> directories. We create symlinks bin -> bin-<abi> and sbin
-# -> sbin-<abi> so that the rest of Buildroot can find the toolchain
-# tools in the appropriate location.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS)$(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS),y)
-ifeq ($(BR2_MIPS_OABI32),y)
-TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = o32
-else ifeq ($(BR2_MIPS_NABI32),y)
-TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = n32
-else ifeq ($(BR2_MIPS_NABI64),y)
-TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX = n64
-endif
-
-define TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS
-	rmdir $(STAGING_DIR)/usr/bin $(STAGING_DIR)/usr/sbin
-	ln -sf bin-$(TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX) $(STAGING_DIR)/usr/bin
-	ln -sf sbin-$(TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_BIN_DIR_SUFFIX) $(STAGING_DIR)/usr/sbin
-endef
-endif
-
-# Special handling for Blackfin toolchain, because of the split in two
-# tarballs, and the organization of tarball contents. The tarballs
-# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
-# which themselves contain the toolchain. This is why we strip more
-# components than usual.
-define TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
-	$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \
-		$(TAR) --strip-components=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) -
-endef
-
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM),y)
-TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
-TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A),y)
-TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
-TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2
-TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
-define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
-	mv $(@D)/arago-2011.09/armv7a/* $(@D)/
-	rm -rf $(@D)/arago-2011.09/
-endef
-TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE),y)
-TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
-TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2
-TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
-define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
-	mv $(@D)/arago-2011.09/armv5te/* $(@D)/
-	rm -rf $(@D)/arago-2011.09/
-endef
-TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
-TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/arm-linux-gnueabihf
-ifeq ($(HOSTARCH),x86)
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_arm-linux-gnueabihf.tar.xz
-else
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabihf.tar.xz
-endif
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
-TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/armeb-linux-gnueabihf
-ifeq ($(HOSTARCH),x86)
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_armeb-linux-gnueabihf.tar.xz
-else
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_armeb-linux-gnueabihf.tar.xz
-endif
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS),y)
-TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = mips-2016.05-8-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII),y)
-TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2016.05-10-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH),y)
-TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86),y)
-TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64),y)
-TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/x86_64-amd-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = amd-2015.11-139-x86_64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS),y)
-TOOLCHAIN_EXTERNAL_SITE = http://codescape-mips-sdk.imgtec.com/components/toolchain/2016.05-03
-TOOLCHAIN_EXTERNAL_SOURCE = Codescape.GNU.Tools.Package.2016.05-03.for.MIPS.IMG.Linux.CentOS-5.x86.tar.gz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS
-TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS),y)
-TOOLCHAIN_EXTERNAL_SITE = http://codescape-mips-sdk.imgtec.com/components/toolchain/2016.05-03
-TOOLCHAIN_EXTERNAL_SOURCE = Codescape.GNU.Tools.Package.2016.05-03.for.MIPS.MTI.Linux.CentOS-5.x86.tar.gz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_SYMLINK
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESCAPE_MIPS_STAGING_FIXUPS
-TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX),y)
-TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386
-TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 3
-TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
-TOOLCHAIN_EXTERNAL_SITE = https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/aarch64-linux-gnu
-ifeq ($(HOSTARCH),x86)
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-i686_aarch64-linux-gnu.tar.xz
-else
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.3.1-2016.05-x86_64_aarch64-linux-gnu.tar.xz
-endif
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y)
-TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-amd-linux-gnu
-TOOLCHAIN_EXTERNAL_SOURCE = aarch64-amd-2014.11-95-aarch64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2
-define TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_STAGING_FIXUP
-	ln -sf ld-2.20.so $(STAGING_DIR)/lib/ld-linux-aarch64.so.1
-endef
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_STAGING_FIXUP
-define TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_TARGET_FIXUP
-	ln -sf ld-2.20.so $(TARGET_DIR)/lib/ld-linux-aarch64.so.1
-endef
-TOOLCHAIN_EXTERNAL_POST_INSTALL_TARGET_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64_TARGET_FIXUP
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
-TOOLCHAIN_EXTERNAL_VERSION = 1.1.12
-TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)
-ifeq ($(BR2_arm)$(BR2_ARM_EABI),yy)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_arm)$(BR2_ARM_EABIHF),yy)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabihf-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_armeb),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_i386),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_mips),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_powerpc),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_sh4),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-sh4-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_sh4eb),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-sh4eb-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-else ifeq ($(BR2_x86_64),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
-endif
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC),y)
-TOOLCHAIN_EXTERNAL_SITE = https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2014.12
-ifeq ($(BR2_arc750d)$(BR2_arc770d),y)
-TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = arc700
-else
-TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = archs
-endif
-ifeq ($(BR2_arcle),y)
-TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = le
-else
-TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = be
-endif
-TOOLCHAIN_EXTERNAL_SOURCE = arc_gnu_2014.12_prebuilt_uclibc_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS)_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE)_linux_install.tar.gz
-else
-# Custom toolchain
-TOOLCHAIN_EXTERNAL_SITE = $(patsubst %/,%,$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))))
-TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
-# We can't check hashes for custom downloaded toolchains
-BR_NO_CHECK_HASH_FOR += $(TOOLCHAIN_EXTERNAL_SOURCE)
-endif
-
-# Some toolchain vendors have a regular file naming pattern.
-# For them, mass-define _ACTUAL_SOURCE_TARBALL based _SITE.
-ifneq ($(findstring sourcery.mentor.com/public/gnu_toolchain,$(TOOLCHAIN_EXTERNAL_SITE)),)
-TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \
-	$(subst -i686-pc-linux-gnu.tar.bz2,.src.tar.bz2,$(subst -i686-pc-linux-gnu-i386-linux.tar.bz2,-i686-pc-linux-gnu.src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE)))
-endif
-
-# Normal handling of downloaded toolchain tarball extraction.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
-TOOLCHAIN_EXTERNAL_EXCLUDES = usr/lib/locale/*
-
-# As a regular package, the toolchain gets extracted in $(@D), but
-# since it's actually a fairly special package, we need it to be moved
-# into TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR.
-define TOOLCHAIN_EXTERNAL_MOVE
-	rm -rf $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR)
-	mkdir -p $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR)
-	mv $(@D)/* $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR)/
-endef
-TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += \
-	TOOLCHAIN_EXTERNAL_MOVE
-endif
-
-# Checks for an already installed toolchain: check the toolchain
-# location, check that it is usable, and then verify that it
-# matches the configuration provided in Buildroot: ABI, C++ support,
-# kernel headers version, type of C library and all C library features.
-define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
-	$(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC))
-	$(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC))
-	$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
-	$(call check_kernel_headers_version,\
-		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
-		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
-	$(call check_gcc_version,$(TOOLCHAIN_EXTERNAL_CC),\
-		$(call qstrip,$(BR2_TOOLCHAIN_GCC_AT_LEAST))); \
-	if test "$(BR2_arm)" = "y" ; then \
-		$(call check_arm_abi,\
-			"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
-			$(TOOLCHAIN_EXTERNAL_READELF)) ; \
-	fi ; \
-	if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \
-		$(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \
-	fi ; \
-	if test "$(BR2_TOOLCHAIN_HAS_FORTRAN)" = "y" ; then \
-		$(call check_fortran,$(TOOLCHAIN_EXTERNAL_FC)) ; \
-	fi ; \
-	if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \
-		$(call check_uclibc,$${SYSROOT_DIR}) ; \
-	elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \
-		$(call check_musl,$${SYSROOT_DIR}) ; \
-	else \
-		$(call check_glibc,$${SYSROOT_DIR}) ; \
-	fi
-	$(Q)$(call check_toolchain_ssp,$(TOOLCHAIN_EXTERNAL_CC))
-endef
-
-TOOLCHAIN_EXTERNAL_BUILD_CMDS = $(TOOLCHAIN_WRAPPER_BUILD)
-
-define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
-	$(TOOLCHAIN_WRAPPER_INSTALL)
-	$(TOOLCHAIN_EXTERNAL_CREATE_STAGING_LIB_SYMLINK)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS_BFIN_FDPIC)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT)
-endef
-
-# Even though we're installing things in both the staging, the host
-# and the target directory, we do everything within the
-# install-staging step, arbitrarily.
-define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS
-	$(TOOLCHAIN_EXTERNAL_CREATE_TARGET_LIB_SYMLINK)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC)
-	$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT)
-	$(TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO)
-endef
-
-$(eval $(generic-package))
-
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 180a63d..be1b5e4 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -4,573 +4,9 @@
 #
 ################################################################################
 
-#
-# This package implements the support for external toolchains, i.e
-# toolchains that are available pre-built, ready to use. Such toolchain
-# may either be readily available on the Web (Linaro, Sourcery
-# CodeBench, from processor vendors) or may be built with tools like
-# Crosstool-NG or Buildroot itself. So far, we have tested this
-# with:
-#
-#  * Toolchains generated by Crosstool-NG
-#  * Toolchains generated by Buildroot
-#  * Toolchains provided by Linaro for the ARM and AArch64
-#    architectures
-#  * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM,
-#    MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS
-#    toolchain, the -muclibc variant isn't supported yet, only the
-#    default glibc-based variant is.
-#  * Analog Devices toolchains for the Blackfin architecture
-#  * Xilinx toolchains for the Microblaze architecture
-#  * Synopsys DesignWare toolchains for ARC cores
-#
-# The basic principle is the following
-#
-#  1. If the toolchain is not pre-installed, download and extract it
-#  in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise,
-#  $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has
-#  already been installed by the user.
-#
-#  2. For all external toolchains, perform some checks on the
-#  conformity between the toolchain configuration described in the
-#  Buildroot menuconfig system, and the real configuration of the
-#  external toolchain. This is for example important to make sure that
-#  the Buildroot configuration system knows whether the toolchain
-#  supports RPC, IPv6, locales, large files, etc. Unfortunately, these
-#  things cannot be detected automatically, since the value of these
-#  options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at
-#  configuration time because these options are used as dependencies
-#  for other options. And at configuration time, we are not able to
-#  retrieve the external toolchain configuration.
-#
-#  3. Copy the libraries needed at runtime to the target directory,
-#  $(TARGET_DIR). Obviously, things such as the C library, the dynamic
-#  loader and a few other utility libraries are needed if dynamic
-#  applications are to be executed on the target system.
-#
-#  4. Copy the libraries and headers to the staging directory. This
-#  will allow all further calls to gcc to be made using --sysroot
-#  $(STAGING_DIR), which greatly simplifies the compilation of the
-#  packages when using external toolchains. So in the end, only the
-#  cross-compiler binaries remains external, all libraries and headers
-#  are imported into the Buildroot tree.
-#
-#  5. Build a toolchain wrapper which executes the external toolchain
-#  with a number of arguments (sysroot/march/mtune/..) hardcoded,
-#  so we're sure the correct configuration is always used and the
-#  toolchain behaves similar to an internal toolchain.
-#  This toolchain wrapper and symlinks are installed into
-#  $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
-#  of Buildroot is handled identical for the 2 toolchain types.
-
-#
-# Definitions of where the toolchain can be found
-#
-
-TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
-TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain
-
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
-TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR)
-else
-TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
-endif
-
-ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),)
-ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),)
-# if no path set, figure it out from path
-TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc))
-endif
-else
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX),y)
-TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
-else
-TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin
-endif
-endif
-
-# If this is a buildroot toolchain, it already has a wrapper which we want to
-# bypass. Since this is only evaluated after it has been extracted, we can use
-# $(wildcard ...) here.
-TOOLCHAIN_EXTERNAL_SUFFIX = \
-	$(if $(wildcard $(TOOLCHAIN_EXTERNAL_BIN)/*.br_real),.br_real)
-
-TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)-
-TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc$(TOOLCHAIN_EXTERNAL_SUFFIX)
-TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++$(TOOLCHAIN_EXTERNAL_SUFFIX)
-TOOLCHAIN_EXTERNAL_FC = $(TOOLCHAIN_EXTERNAL_CROSS)gfortran$(TOOLCHAIN_EXTERNAL_SUFFIX)
-TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX)
-
-
-#
-# Definitions of the list of libraries that should be copied to the target.
-#
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y)
-TOOLCHAIN_EXTERNAL_LIBS += libatomic.so.* libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.*
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy)
-TOOLCHAIN_EXTERNAL_LIBS += ld-linux-armhf.so.*
-else
-TOOLCHAIN_EXTERNAL_LIBS += ld*.so.*
-endif
-ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
-TOOLCHAIN_EXTERNAL_LIBS += libpthread.so.*
-ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),)
-TOOLCHAIN_EXTERNAL_LIBS += libthread_db.so.*
-endif # gdbserver
-endif # ! no threads
-endif
-
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
-TOOLCHAIN_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.* libmvec.so.*
-endif
-
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
-TOOLCHAIN_EXTERNAL_LIBS += libc.so libgcc_s.so.*
-endif
-
-ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
-TOOLCHAIN_EXTERNAL_LIBS += libstdc++.so.*
-endif
-
-ifeq ($(BR2_TOOLCHAIN_HAS_FORTRAN),y)
-TOOLCHAIN_EXTERNAL_LIBS += libgfortran.so.*
-# fortran needs quadmath on x86 and x86_64
-ifeq ($(BR2_TOOLCHAIN_HAS_LIBQUADMATH),y)
-TOOLCHAIN_EXTERNAL_LIBS += libquadmath.so*
-endif
-endif
-
-TOOLCHAIN_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
-
-
-#
-# Definition of the CFLAGS to use with the external toolchain, as well as the
-# common toolchain wrapper build arguments
-#
-ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),)
-CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU))
-else
-CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION))
-endif
-CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
-CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI))
-CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU))
-CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
-CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE))
-
-# march/mtune/floating point mode needs to be passed to the external toolchain
-# to select the right multilib variant
-ifeq ($(BR2_x86_64),y)
-TOOLCHAIN_EXTERNAL_CFLAGS += -m64
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_64
-endif
-ifneq ($(CC_TARGET_ARCH_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
-endif
-ifneq ($(CC_TARGET_CPU_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
-endif
-ifneq ($(CC_TARGET_ABI_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
-endif
-ifneq ($(CC_TARGET_FPU_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
-endif
-ifneq ($(CC_TARGET_FLOAT_ABI_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
-endif
-ifneq ($(CC_TARGET_MODE_),)
-TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
-endif
-ifeq ($(BR2_BINFMT_FLAT),y)
-TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_BINFMT_FLAT
-endif
-ifeq ($(BR2_mipsel)$(BR2_mips64el),y)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
-TOOLCHAIN_EXTERNAL_CFLAGS += -EL
-endif
-ifeq ($(BR2_mips)$(BR2_mips64),y)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
-TOOLCHAIN_EXTERNAL_CFLAGS += -EB
-endif
-ifeq ($(BR2_arceb),y)
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN
-TOOLCHAIN_EXTERNAL_CFLAGS += -EB
-endif
-
-TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION))
-
-ifeq ($(BR2_SOFT_FLOAT),y)
-TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
-endif
-
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
-	-DBR_CROSS_PATH_SUFFIX='"$(TOOLCHAIN_EXTERNAL_SUFFIX)"'
-
-ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),)
-# TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
-	-DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"'
-else
-# TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path
-TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
-	-DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"'
-endif
-
-
-#
-# The following functions creates the symbolic links needed to get the
-# cross-compilation tools visible in $(HOST_DIR)/usr/bin. Some of
-# links are done directly to the corresponding tool in the external
-# toolchain installation directory, while some other links are done to
-# the toolchain wrapper (preprocessor, C, C++ and Fortran compiler)
-#
-# We skip gdb symlink when we are building our own gdb to prevent two
-# gdb's in $(HOST_DIR)/usr/bin.
-#
-# The LTO support in gcc creates wrappers for ar, ranlib and nm which load
-# the lto plugin. These wrappers are called *-gcc-ar, *-gcc-ranlib, and
-# *-gcc-nm and should be used instead of the real programs when -flto is
-# used. However, we should not add the toolchain wrapper for them, and they
-# match the *cc-* pattern. Therefore, an additional case is added for *-ar,
-# *-ranlib and *-nm.
-define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
-	$(Q)cd $(HOST_DIR)/usr/bin; \
-	for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
-		base=$${i##*/}; \
-		case "$$base" in \
-		*-ar|*-ranlib|*-nm) \
-			ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
-			;; \
-		*cc|*cc-*|*++|*++-*|*cpp|*-gfortran) \
-			ln -sf toolchain-wrapper $$base; \
-			;; \
-		*gdb|*gdbtui) \
-			if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \
-				ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
-			fi \
-			;; \
-		*) \
-			ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
-			;; \
-		esac; \
-	done
-endef
-
-
-# Various utility functions used by the external toolchain package
-# infrastructure. Those functions are mainly responsible for:
-#
-#   - installation the toolchain libraries to $(TARGET_DIR)
-#   - copying the toolchain sysroot to $(STAGING_DIR)
-#   - installing a gdbinit file
-#
-# Details about sysroot directory selection.
-#
-# To find the sysroot directory, we use the trick of looking for the
-# 'libc.a' file with the -print-file-name gcc option, and then
-# mangling the path to find the base directory of the sysroot.
-#
-# Note that we do not use the -print-sysroot option, because it is
-# only available since gcc 4.4.x, and we only recently dropped support
-# for 4.2.x and 4.3.x.
-#
-# When doing this, we don't pass any option to gcc that could select a
-# multilib variant (such as -march) as we want the "main" sysroot,
-# which contains all variants of the C library in the case of multilib
-# toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the
-# path of the cross-compiler, without the --sysroot=$(STAGING_DIR),
-# since what we want to find is the location of the original toolchain
-# sysroot. This "main" sysroot directory is stored in SYSROOT_DIR.
-#
-# Then, multilib toolchains are a little bit more complicated, since
-# they in fact have multiple sysroots, one for each variant supported
-# by the toolchain. So we need to find the particular sysroot we're
-# interested in.
-#
-# To do so, we ask the compiler where its sysroot is by passing all
-# flags (including -march and al.), except the --sysroot flag since we
-# want to the compiler to tell us where its original sysroot
-# is. ARCH_SUBDIR will contain the subdirectory, in the main
-# SYSROOT_DIR, that corresponds to the selected architecture
-# variant. ARCH_SYSROOT_DIR will contain the full path to this
-# location.
-#
-# One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The
-# fact is that in multilib toolchains, the header files are often only
-# present in the main sysroot, and only the libraries are available in
-# each variant-specific sysroot directory.
-
-
-# toolchain_find_sysroot returns the sysroot location for the given
-# compiler + flags. We need to handle cases where libc.a is in:
-#
-#  - lib/
-#  - usr/lib/
-#  - lib32/
-#  - lib64/
-#  - lib32-fp/ (Cavium toolchain)
-#  - lib64-fp/ (Cavium toolchain)
-#  - usr/lib/<tuple>/ (Linaro toolchain)
-#
-# And variations on these.
-define toolchain_find_sysroot
-$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?([^/]*)?/([^/]*/)?libc\.a::')
-endef
-
-# Returns the lib subdirectory for the given compiler + flags (i.e
-# typically lib32 or lib64 for some toolchains)
-define toolchain_find_libdir
-$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?([^/]*)?)/([^/]*/)?libc.a:\2:')
-endef
-
-# Returns the location of the libc.a file for the given compiler + flags
-define toolchain_find_libc_a
-$$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a))
-endef
-
-# Integration of the toolchain into Buildroot: find the main sysroot
-# and the variant-specific sysroot, then copy the needed libraries to
-# the $(TARGET_DIR) and copy the whole sysroot (libraries and headers)
-# to $(STAGING_DIR).
-#
-# Variables are defined as follows:
-#
-#  LIBC_A_LOCATION:     location of the libc.a file in the default
-#                       multilib variant (allows to find the main
-#                       sysroot directory)
-#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a
-#
-#  SYSROOT_DIR:         the main sysroot directory, deduced from
-#                       LIBC_A_LOCATION by removing the
-#                       usr/lib[32|64]/libc.a part of the path.
-#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/
-#
-# ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected
-#                       multilib variant (taking into account the
-#                       CFLAGS). Allows to find the sysroot of the
-#                       selected multilib variant.
-#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a
-#
-# ARCH_SYSROOT_DIR:     the sysroot of the selected multilib variant,
-#                       deduced from ARCH_LIBC_A_LOCATION by removing
-#                       usr/lib[32|64]/libc.a at the end of the path.
-#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/
-#
-# ARCH_LIB_DIR:         'lib', 'lib32' or 'lib64' depending on where libraries
-#                       are stored. Deduced from ARCH_LIBC_A_LOCATION by
-#                       looking at usr/lib??/libc.a.
-#                       Ex: lib
-#
-# ARCH_SUBDIR:          the relative location of the sysroot of the selected
-#                       multilib variant compared to the main sysroot.
-#			Ex: mips16/soft-float/el
-#
-# SUPPORT_LIB_DIR:      some toolchains, such as recent Linaro toolchains,
-#                       store GCC support libraries (libstdc++,
-#                       libgcc_s, etc.) outside of the sysroot. In
-#                       this case, SUPPORT_LIB_DIR is set to a
-#                       non-empty value, and points to the directory
-#                       where these support libraries are
-#                       available. Those libraries will be copied to
-#                       our sysroot, and the directory will also be
-#                       considered when searching libraries for copy
-#                       to the target filesystem.
-#
-# Please be very careful to check the major toolchain sources:
-# Buildroot, Crosstool-NG, CodeSourcery and Linaro
-# before doing any modification on the below logic.
-
-ifeq ($(BR2_STATIC_LIBS),)
-define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS
-	$(Q)$(call MESSAGE,"Copying external toolchain libraries to target...")
-	$(Q)for libs in $(TOOLCHAIN_EXTERNAL_LIBS); do \
-		$(call copy_toolchain_lib_root,$$libs); \
-	done
-endef
-endif
-
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),y)
-define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER
-	$(Q)$(call MESSAGE,"Copying gdbserver")
-	$(Q)ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	gdbserver_found=0 ; \
-	for d in $${ARCH_SYSROOT_DIR}/usr \
-		 $${ARCH_SYSROOT_DIR}/../debug-root/usr \
-		 $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} \
-		 $(TOOLCHAIN_EXTERNAL_INSTALL_DIR); do \
-		if test -f $${d}/bin/gdbserver ; then \
-			install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \
-			gdbserver_found=1 ; \
-			break ; \
-		fi ; \
-	done ; \
-	if [ $${gdbserver_found} -eq 0 ] ; then \
-		echo "Could not find gdbserver in external toolchain" ; \
-		exit 1 ; \
-	fi
-endef
-endif
-
-define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS
-	$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
-	ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	SUPPORT_LIB_DIR="" ; \
-	if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
-		LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
-		if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
-			SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
-		fi ; \
-	fi ; \
-	if [ "$${SYSROOT_DIR}" == "$${ARCH_SYSROOT_DIR}" ] ; then \
-		ARCH_SUBDIR="" ; \
-	elif [ "`dirname $${ARCH_SYSROOT_DIR}`" = "`dirname $${SYSROOT_DIR}`" ] ; then \
-		SYSROOT_DIR_DIRNAME=`dirname $${SYSROOT_DIR}`/ ; \
-		ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR_DIRNAME}(.*)/$$:\1:"` ; \
-	else \
-		ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
-	fi ; \
-	$(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \
-	$(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR})
-endef
-
-# Create a symlink from (usr/)$(ARCH_LIB_DIR) to lib.
-# Note: the skeleton package additionally creates lib32->lib or lib64->lib
-# (as appropriate)
-#
-# $1: destination directory (TARGET_DIR / STAGING_DIR)
-create_lib_symlinks = \
-       $(Q)DESTDIR="$(strip $1)" ; \
-       ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-       if [ ! -e "$${DESTDIR}/$${ARCH_LIB_DIR}" -a ! -e "$${DESTDIR}/usr/$${ARCH_LIB_DIR}" ]; then \
-               ln -snf lib "$${DESTDIR}/$${ARCH_LIB_DIR}" ; \
-               ln -snf lib "$${DESTDIR}/usr/$${ARCH_LIB_DIR}" ; \
-       fi
-
-define TOOLCHAIN_EXTERNAL_CREATE_STAGING_LIB_SYMLINK
-       $(call create_lib_symlinks,$(STAGING_DIR))
-endef
-
-define TOOLCHAIN_EXTERNAL_CREATE_TARGET_LIB_SYMLINK
-       $(call create_lib_symlinks,$(TARGET_DIR))
-endef
-
-#
-# Generate gdbinit file for use with Buildroot
-#
-define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT
-	$(Q)if test -f $(TARGET_CROSS)gdb ; then \
-		$(call MESSAGE,"Installing gdbinit"); \
-		$(gen_gdbinit_file); \
-	fi
-endef
-
-# Various utility functions used by the external toolchain based on musl.
-
-# musl does not provide an implementation for sys/queue.h or sys/cdefs.h.
-# So, add the musl-compat-headers package that will install those files,
-# into the staging directory:
-#   sys/queue.h:  header from NetBSD
-#   sys/cdefs.h:  minimalist header bundled in Buildroot
-ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
-TOOLCHAIN_EXTERNAL_DEPENDENCIES += musl-compat-headers
-endif
-
-# With the musl C library, the libc.so library directly plays the role
-# of the dynamic library loader. We just need to create a symbolic
-# link to libc.so with the appropriate name.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
-ifeq ($(BR2_i386),y)
-MUSL_ARCH = i386
-else ifeq ($(BR2_ARM_EABIHF),y)
-MUSL_ARCH = armhf
-else ifeq ($(BR2_mipsel):$(BR2_SOFT_FLOAT),y:y)
-MUSL_ARCH = mipsel-sf
-else ifeq ($(BR2_sh),y)
-MUSL_ARCH = sh
-else
-MUSL_ARCH = $(ARCH)
-endif
-define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
-	ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1
-endef
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
-endif
-
-#
-# Various functions used by the external toolchain package
-# infrastructure to handle the Blackfin specific
-# BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
-# options.
-#
-
-# Special installation target used on the Blackfin architecture when
-# FDPIC is not the primary binary format being used, but the user has
-# nonetheless requested the installation of the FDPIC libraries to the
-# target filesystem.
-ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y)
-define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS_BFIN_FDPIC
-	$(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to staging...")
-	$(Q)FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \
-	FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
-	FDPIC_SUPPORT_LIB_DIR="" ; \
-	if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
-	        FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
-	        if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \
-	                FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
-	        fi ; \
-	fi ; \
-	$(call copy_toolchain_sysroot,$${FDPIC_SYSROOT_DIR},$${FDPIC_SYSROOT_DIR},,$${FDPIC_LIB_DIR},$${FDPIC_SUPPORT_LIB_DIR})
-endef
-define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
-	$(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...")
-	$(Q)for libs in $(TOOLCHAIN_EXTERNAL_LIBS); do \
-		$(call copy_toolchain_lib_root,$$libs); \
-	done
-endef
-endif
-
-# Special installation target used on the Blackfin architecture when
-# shared FLAT is not the primary format being used, but the user has
-# nonetheless requested the installation of the shared FLAT libraries
-# to the target filesystem. The flat libraries are found and linked
-# according to the index in name "libN.so". Index 1 is reserved for
-# the standard C library. Customer libraries can use 4 and above.
-ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y)
-define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
-	$(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...")
-	$(Q)FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \
-	FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \
-	if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \
-	        $(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \
-	fi
-endef
-endif
-
-# uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not
-# patched specifically for uClibc-ng, so it continues to generate
-# binaries that expect the dynamic loader to be named ld-uClibc.so.0,
-# like with the original uClibc. Therefore, we create an additional
-# symbolic link to make uClibc-ng systems work properly.
-define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
-	$(Q)if test -e $(TARGET_DIR)/lib/ld-uClibc.so.1; then \
-		ln -sf ld-uClibc.so.1 $(TARGET_DIR)/lib/ld-uClibc.so.0 ; \
-	fi
-	$(Q)if test -e $(TARGET_DIR)/lib/ld64-uClibc.so.1; then \
-		ln -sf ld64-uClibc.so.1 $(TARGET_DIR)/lib/ld64-uClibc.so.0 ; \
-	fi
-endef
+# All the definition that are common between the toolchain-external
+# generic package and the toolchain-external-package infrastructure
+# can be found in pkg-toolchain-external.mk
 
 TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
 TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
