Message ID | 1594097887-25563-1-git-send-email-sunil@amarulasolutions.com |
---|---|
State | Changes Requested |
Headers | show |
Series | configs/rock_pi_n8: new defconfig | expand |
On Tue, Jul 7, 2020 at 10:28 AM Suniel Mahesh <sunil@amarulasolutions.com> wrote: > > Add initial support for RK3288 SOM based radxa rockpi-n8 > target with below features: > > - Custom U-Boot 2020.07-rc4 > https://github.com/amarula/u-boot-amarula.git > branch rock-pi > - Custom Linux 5.7.0-rc1 > https://github.com/amarula/linux-amarula.git > branch rockpi > - GPT partition layout is being used > - Default packages from buildroot > > Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> > --- > NOTE: > - patches for this target are submitted to Linux and u-boot > mainline, once accepted and merged, we use mainline Linux > and u-boot. > --- > .gitlab-ci.yml | 1 + > DEVELOPERS | 2 ++ > board/radxa/rockpi-n8/extlinux.conf | 4 +++ > board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ > board/radxa/rockpi-n8/post-build.sh | 5 +++ > board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ > configs/rock_pi_n8_defconfig | 49 +++++++++++++++++++++++++++++ > 7 files changed, 161 insertions(+) > create mode 100644 board/radxa/rockpi-n8/extlinux.conf > create mode 100644 board/radxa/rockpi-n8/genimage.cfg > create mode 100755 board/radxa/rockpi-n8/post-build.sh > create mode 100644 board/radxa/rockpi-n8/readme.txt > create mode 100644 configs/rock_pi_n8_defconfig > > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml > index ac4288b..119f98e 100644 > --- a/.gitlab-ci.yml > +++ b/.gitlab-ci.yml > @@ -324,6 +324,7 @@ roc_pc_rk3399_defconfig: { extends: .defconfig } > rock64_defconfig: { extends: .defconfig } > rockpro64_defconfig: { extends: .defconfig } > rock_pi_4_defconfig: { extends: .defconfig } > +rock_pi_n8_defconfig: { extends: .defconfig } > rock_pi_n10_defconfig: { extends: .defconfig } > roseapplepi_defconfig: { extends: .defconfig } > s6lx9_microboard_defconfig: { extends: .defconfig } > diff --git a/DEVELOPERS b/DEVELOPERS > index 9f93d3a..7738847 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2405,6 +2405,7 @@ F: board/friendlyarm/nanopc-t4 > F: board/friendlyarm/nanopi-m4 > F: board/orangepi/orangepi-rk3399 > F: board/radxa/rockpi-4 > +F: board/radxa/rockpi-n8 > F: board/radxa/rockpi-n10 > F: board/pine64/rockpro64 > F: configs/nanopc_t4_defconfig > @@ -2412,6 +2413,7 @@ F: configs/nanopi_m4_defconfig > F: configs/orangepi_rk3399_defconfig > F: configs/roc_pc_rk3399_defconfig > F: configs/rock_pi_4_defconfig > +F: configs/rock_pi_n8_defconfig > F: configs/rock_pi_n10_defconfig > F: configs/rockpro64_defconfig > F: package/arm-gnu-a-toolchain/ > diff --git a/board/radxa/rockpi-n8/extlinux.conf b/board/radxa/rockpi-n8/extlinux.conf > new file mode 100644 > index 0000000..3b05d78 > --- /dev/null > +++ b/board/radxa/rockpi-n8/extlinux.conf > @@ -0,0 +1,4 @@ > +label RK3399_ROCKPI_N8 linux > + kernel /uImage > + devicetree /rk3288-rock-pi-n8.dtb > + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwait Better replace this root device into PARTUUID you can add GPT part ID for rootfs. > diff --git a/board/radxa/rockpi-n8/genimage.cfg b/board/radxa/rockpi-n8/genimage.cfg > new file mode 100644 > index 0000000..36d7906 > --- /dev/null > +++ b/board/radxa/rockpi-n8/genimage.cfg > @@ -0,0 +1,39 @@ > +image boot.vfat { > + vfat { > + files = { > + "uImage", > + "rk3288-rock-pi-n8.dtb", > + "extlinux" > + } > + } > + size = 112M > +} > + > +image sdcard.img { > + > + hdimage { > + gpt = true > + } > + > + partition loader1 { > + image = "idbloader.img" > + offset = 32K > + } > + > + partition loader2 { > + image = "u-boot-dtb.img" > + offset = 8M > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + offset = 16M > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" partid here.
Hello, On Tue, 7 Jul 2020 10:28:07 +0530 Suniel Mahesh <sunil@amarulasolutions.com> wrote: > diff --git a/configs/rock_pi_n8_defconfig b/configs/rock_pi_n8_defconfig > new file mode 100644 > index 0000000..291fa18 > --- /dev/null > +++ b/configs/rock_pi_n8_defconfig > @@ -0,0 +1,49 @@ > +# Architecture > +BR2_arm=y > +BR2_cortex_a17=y > +BR2_ARM_FPU_NEON_VFPV4=y > + > +# Linux headers same as kernel, a 5.4 series 5.7 series > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_GIT=y > +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" > +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rock-pi" This is a branch, we need a tag, or commit. Or better, an upstream version. > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_GIT=y > +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git" > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rockpi" Ditto: this is a branch, we need a tag or commit. Or better, an upstream version. > +BR2_LINUX_KERNEL_USE_DEFCONFIG=y > +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" > +BR2_LINUX_KERNEL_UIMAGE=y > +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" Why a uImage, with a modern U-Boot ? This doesn't make sense. > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y This is useless since the kernel image is in a separate FAT filesystem. > + > +# Filesystem > +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" > +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8..!!" Drop the "..!!" at the end of this. Thanks! Thomas
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index ac4288b..119f98e 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -324,6 +324,7 @@ roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rockpro64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 9f93d3a..7738847 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2405,6 +2405,7 @@ F: board/friendlyarm/nanopc-t4 F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: board/pine64/rockpro64 F: configs/nanopc_t4_defconfig @@ -2412,6 +2413,7 @@ F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/ diff --git a/board/radxa/rockpi-n8/extlinux.conf b/board/radxa/rockpi-n8/extlinux.conf new file mode 100644 index 0000000..3b05d78 --- /dev/null +++ b/board/radxa/rockpi-n8/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_ROCKPI_N8 linux + kernel /uImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwait diff --git a/board/radxa/rockpi-n8/genimage.cfg b/board/radxa/rockpi-n8/genimage.cfg new file mode 100644 index 0000000..36d7906 --- /dev/null +++ b/board/radxa/rockpi-n8/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/radxa/rockpi-n8/post-build.sh b/board/radxa/rockpi-n8/post-build.sh new file mode 100755 index 0000000..ba29375 --- /dev/null +++ b/board/radxa/rockpi-n8/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/radxa/rockpi-n8/readme.txt b/board/radxa/rockpi-n8/readme.txt new file mode 100644 index 0000000..dd81474 --- /dev/null +++ b/board/radxa/rockpi-n8/readme.txt @@ -0,0 +1,61 @@ +RADXA ROCKPI-N8 +================ +https://wiki.radxa.com/RockpiN8 + +Build: +====== + $ make rock_pi_n8_defconfig + $ make + +Files created in output directory +================================= + +output/images +. +├── boot.vfat +├── extlinux +├── idbloader.img +├── rk3288-rock-pi-n8.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +├── u-boot-dtb.bin +├── u-boot-dtb.img +└── uImage + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== + +Serial console: +--------------- +RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Baudrate for this board is 115200. + +The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image, the board +always boots from emmc. To boot from SD, erase emmc as per the guide: + +https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +wiki link: +---------- +https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.html diff --git a/configs/rock_pi_n8_defconfig b/configs/rock_pi_n8_defconfig new file mode 100644 index 0000000..291fa18 --- /dev/null +++ b/configs/rock_pi_n8_defconfig @@ -0,0 +1,49 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rock-pi" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-n8-rk3288" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rockpi" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8" +BR2_LINUX_KERNEL_INSTALL_TARGET=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8..!!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-n8/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-n8/post-build.sh"
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features: - Custom U-Boot 2020.07-rc4 https://github.com/amarula/u-boot-amarula.git branch rock-pi - Custom Linux 5.7.0-rc1 https://github.com/amarula/linux-amarula.git branch rockpi - GPT partition layout is being used - Default packages from buildroot Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> --- NOTE: - patches for this target are submitted to Linux and u-boot mainline, once accepted and merged, we use mainline Linux and u-boot. --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 49 +++++++++++++++++++++++++++++ 7 files changed, 161 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig