diff mbox series

[v4,2/5] package/freescale-imx/firmware-imx: add choice for DDR training binaries

Message ID 1590556068-7043-3-git-send-email-stephane.viau@oss.nxp.com
State Accepted
Headers show
Series imx: add i.MX8M Nano EVK board support | expand

Commit Message

Stephane Viau (OSS) May 27, 2020, 5:07 a.m. UTC
Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4,
etc.), for which the DDR training is performed in the bootloader.
Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4
(e.g.: NXP's reference board EVK). This patch allows the selection of either
of the binaries used to train the DDR.

Note that DDR and HDMI FW copies are now separated, which makes latter
being properly copied only for the relevant SoC (i.MX8MQ).
Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
---
v4:
  - Keep the 'if IMX8M...' around the whole block (Gary)
  - Remove FIRMWARE_IMX_PREPARE_HDMI_FW empty definition (Gary)
v3:
  - Use common FIRMWARE_IMX_INSTALL_IMAGES_CMDS for all i.MX8M platforms
    and let FIRMWARE_IMX_PREPARE_{DDR,HDMI}_FW be different according to
    the type of DDR mounted (BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW choice)
    or the eventual presence of HDMI, which is SoC dependant.     (Gary)
v2:
  - use BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW to extend the DDR
    firmware selection for 8M, 8MM and 8MN (suggested by Gary)

fixup! package/freescale-imx/firmware-imx: add choice for DDR training binaries

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
---
 package/freescale-imx/firmware-imx/Config.in       | 24 ++++++++++++
 package/freescale-imx/firmware-imx/firmware-imx.mk | 43 +++++++++++++++++++++-
 2 files changed, 65 insertions(+), 2 deletions(-)

Comments

Gary Bisson May 27, 2020, 8:36 a.m. UTC | #1
Hi Stephane,

Thanks for the quick respin!

On Wed, May 27, 2020 at 07:07:45AM +0200, Stephane Viau wrote:
> Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4,
> etc.), for which the DDR training is performed in the bootloader.
> Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4
> (e.g.: NXP's reference board EVK). This patch allows the selection of either
> of the binaries used to train the DDR.
> 
> Note that DDR and HDMI FW copies are now separated, which makes latter
> being properly copied only for the relevant SoC (i.MX8MQ).
> Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
> 
> Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
> Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
> Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary
diff mbox series

Patch

diff --git a/package/freescale-imx/firmware-imx/Config.in b/package/freescale-imx/firmware-imx/Config.in
index 56d5b80..4962992 100644
--- a/package/freescale-imx/firmware-imx/Config.in
+++ b/package/freescale-imx/firmware-imx/Config.in
@@ -8,3 +8,27 @@  config BR2_PACKAGE_FIRMWARE_IMX
 
 	  This library is provided by Freescale as-is and doesn't have
 	  an upstream.
+
+if BR2_PACKAGE_FREESCALE_IMX_NEED_DDR_FW
+
+choice
+	bool "DDR training binaries"
+	default BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4
+	help
+	  Choose the DDR training binaries to be used depending on the
+	  kind of memory that is available on the target board (DDR4,
+	  LPDDR4, etc...).
+
+config BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4
+	bool "lpddr4"
+	help
+	  Use LPDDR4 binaries (i.e.: lpddr4_pmu_train_*.bin)
+
+config BR2_PACKAGE_FIRMWARE_DDRFW_DDR4
+	bool "DDR4"
+	help
+	  Use DDR4 binaries (i.e.: ddr4_*_201810.bin).
+
+endchoice # DDR training FW
+
+endif
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index cd0dafb..32f1bb1 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -19,7 +19,8 @@  define FIRMWARE_IMX_EXTRACT_CMDS
 endef
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M)$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM)$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN),y)
-FIRMWARE_IMX_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_LPDDR4),y)
 FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
 define FIRMWARE_IMX_PREPARE_LPDDR4_FW
 	$(TARGET_OBJCOPY) -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 \
@@ -33,7 +34,7 @@  define FIRMWARE_IMX_PREPARE_LPDDR4_FW
 		$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4_pmu_train_$(1)_fw.bin
 endef
 
-define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
+define FIRMWARE_IMX_PREPARE_DDR_FW
 	# Create padded versions of lpddr4_pmu_* and generate lpddr4_pmu_train_fw.bin.
 	# lpddr4_pmu_train_fw.bin is needed when generating imx8-boot-sd.bin
 	# which is done in post-image script.
@@ -42,9 +43,47 @@  define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
 	cat $(FIRMWARE_IMX_DDRFW_DIR)/lpddr4_pmu_train_1d_fw.bin \
 		$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4_pmu_train_2d_fw.bin > \
 		$(BINARIES_DIR)/lpddr4_pmu_train_fw.bin
+	ln -sf $(BINARIES_DIR)/lpddr4_pmu_train_fw.bin $(BINARIES_DIR)/ddr_fw.bin
+endef
+else ifeq ($(BR2_PACKAGE_FIRMWARE_DDRFW_DDR4),y)
+FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
+define FIRMWARE_IMX_PREPARE_DDR4_FW
+	$(TARGET_OBJCOPY) -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_imem_$(1)_201810.bin \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_imem_$(1)_201810_pad.bin
+	$(TARGET_OBJCOPY) -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_dmem_$(1)_201810.bin \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_dmem_$(1)_201810_pad.bin
+	cat $(FIRMWARE_IMX_DDRFW_DIR)/ddr4_imem_$(1)_201810_pad.bin \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_dmem_$(1)_201810_pad.bin > \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_$(1)_201810_fw.bin
+endef
+
+define FIRMWARE_IMX_PREPARE_DDR_FW
+	# Create padded versions of ddr4_* and generate ddr4_fw.bin.
+	# ddr4_fw.bin is needed when generating imx8-boot-sd.bin
+	# which is done in post-image script.
+	$(call FIRMWARE_IMX_PREPARE_DDR4_FW,1d)
+	$(call FIRMWARE_IMX_PREPARE_DDR4_FW,2d)
+	cat $(FIRMWARE_IMX_DDRFW_DIR)/ddr4_1d_201810_fw.bin \
+		$(FIRMWARE_IMX_DDRFW_DIR)/ddr4_2d_201810_fw.bin > \
+		$(BINARIES_DIR)/ddr4_201810_fw.bin
+	ln -sf $(BINARIES_DIR)/ddr4_201810_fw.bin $(BINARIES_DIR)/ddr_fw.bin
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
+define FIRMWARE_IMX_PREPARE_HDMI_FW
 	cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin \
 		$(BINARIES_DIR)/signed_hdmi_imx8m.bin
 endef
+endif
+
+FIRMWARE_IMX_INSTALL_IMAGES = YES
+define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
+	$(FIRMWARE_IMX_PREPARE_DDR_FW)
+	$(FIRMWARE_IMX_PREPARE_HDMI_FW)
+endef
 else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X),y)
 define FIRMWARE_IMX_INSTALL_TARGET_CMDS
 	$(INSTALL) -D -m 0644 $(@D)/firmware/vpu/vpu_fw_imx8_dec.bin \