Message ID | 1390908698-7256-1-git-send-email-praveen.v@phytec.in |
---|---|
State | Changes Requested |
Headers | show |
>>>>> "Praveen" == Praveen kumar Vattipalli <praveen.v@phytec.in> writes: > Signed-off-by: Praveen Kumar Vattipalli <praveen.v@phytec.in> Thanks for your patch. See below for a few comments: > --- > board/cosmic-am335x/readme.txt | 54 ++++++++++++++++++++++++++++++ > configs/phytec_cosmic_am335x_defconfig | 57 ++++++++++++++++++++++++++++++++ > 2 files changed, 111 insertions(+) > create mode 100644 board/cosmic-am335x/readme.txt > create mode 100644 configs/phytec_cosmic_am335x_defconfig > diff --git a/board/cosmic-am335x/readme.txt b/board/cosmic-am335x/readme.txt > new file mode 100644 > index 0000000..62fd238 > --- /dev/null > +++ b/board/cosmic-am335x/readme.txt > @@ -0,0 +1,54 @@ > +Phytec Cosmic-AM335x Board. > + > +How to build it > +=============== > + > +Configure Buildroot > +------------------- > + > +The pcm051lb_defconfig configuration is a default configuration for Phytec Cosmic-AM335x Board. > + > + $ make phytec_cosmic_am335x_defconfig Ehh, pcm051lb or phytec_cosmit_am335x? > + > +Build the rootfs > +---------------- > +You may now build your rootfs with: > + > + $ make > + > +This may take a long time. In this process it download some pakages,you need internet Connections. Typos/odd sentence. What about: This may take a long time. During this process, additional source code is downloaded from the Internet. > + > +Result of the build > +------------------- > + > +After building, you should obtain this tree: > + > + output/images/ > + +-- rootfs.tar > + +-- barebox.bin > + +-- uImage > + > +To boot the board you need MLO (primary bootloader) so download from below link > +ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/images/MLO Hmm, can't we build MLO ourselves? > + > +Prepare you SDCard > +================== > + > +For more information, download manual > + > + ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/doc/Cosmic-AM335x%20System%20Development%20User%20Manual.pdf > + > +Install the binaries to the SDCard > +---------------------------------- > + > + cp MLO /media/boot > + output/images/ > + cp barebox.bin uImage /media/boot > + tar -xvf rootfs.tar -C /media/rootfs > + Hmm, it looks like there's a mount command, a 'cd' in front of output/images and sudo before the tar missing. > +Finish > +====== > + > +Unmount all the partitions And eject your SDcard from your computer. > + > +Insert the SDcard into your cosmic, and power it up. Your new system should come up, now. > diff --git a/configs/phytec_cosmic_am335x_defconfig b/configs/phytec_cosmic_am335x_defconfig > new file mode 100644 > index 0000000..94ba4ba > --- /dev/null > +++ b/configs/phytec_cosmic_am335x_defconfig > @@ -0,0 +1,57 @@ > +BR2_arm=y > +BR2_cortex_a8=y > +BR2_ARM_SOFT_FLOAT=y > +BR2_JLEVEL=4 Please don't hardcode JLEVEL in a defconfig. > +BR2_DEPRECATED=y Why? > +BR2_TOOLCHAIN_EXTERNAL=y > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y > +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y > +BR2_TOOLCHAIN_EXTERNAL_URL="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/tools/toolchain/arm-cortexa8-linux-gnueabi.tar.bz2" Defconfigs should use the internal uClibc toolchain. > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-cortexa8-linux-gnueabi" > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y > +BR2_TOOLCHAIN_EXTERNAL_CXX=y > +BR2_TARGET_GENERIC_HOSTNAME="Cosmic-AM335x" > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" > +BR2_TARGET_GENERIC_GETTY_TERM="" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/linux/linux-3.2.tar.bz2" No mainline support? > +BR2_LINUX_KERNEL_DEFCONFIG="pcm051lb" > +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y > +BR2_PACKAGE_TAR=y > +BR2_PACKAGE_FBGRAB=y > +BR2_PACKAGE_FBSET=y > +BR2_PACKAGE_FB_TEST_APP=y > +BR2_PACKAGE_FBV=y > +BR2_PACKAGE_EVTEST=y > +BR2_PACKAGE_I2C_TOOLS=y > +BR2_PACKAGE_LZO=y > +BR2_PACKAGE_LIBGPGME=y > +BR2_PACKAGE_TSLIB=y > +BR2_PACKAGE_LIBXML2=y > +BR2_PACKAGE_NCURSES_TARGET_PANEL=y > +BR2_PACKAGE_NCURSES_TARGET_FORM=y > +BR2_PACKAGE_NCURSES_TARGET_MENU=y > +BR2_PACKAGE_CAN_UTILS=y > +BR2_PACKAGE_DHCP=y > +BR2_PACKAGE_DHCP_SERVER=y > +BR2_PACKAGE_DHCP_SERVER_DELAYED_ACK=y > +BR2_PACKAGE_DHCP_CLIENT=y > +BR2_PACKAGE_ETHTOOL=y > +BR2_PACKAGE_IPERF=y > +BR2_PACKAGE_IPROUTE2=y > +BR2_PACKAGE_OPENSSH=y > +BR2_PACKAGE_WGET=y > +BR2_PACKAGE_IPKG=y > +BR2_PACKAGE_OPKG=y > +BR2_PACKAGE_RPM=y > +BR2_PACKAGE_BASH=y > +BR2_PACKAGE_DASH=y > +BR2_PACKAGE_FILE=y > +BR2_PACKAGE_TIME=y > +BR2_PACKAGE_WHICH=y These packages are for a specific use case and shouldn't be in a minimal defconfig. > +BR2_TARGET_BAREBOX=y > +BR2_TARGET_BAREBOX_CUSTOM_TARBALL=y > +BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/bootloaders/barebox/barebox-2013.07.0.tar.bz2" No mainline support? > +BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="pcm051lb"
On 28/01/14 23:10, Peter Korsgaard wrote: >>>>>> "Praveen" == Praveen kumar Vattipalli <praveen.v@phytec.in> writes: [snip] > > + > > +Result of the build > > +------------------- > > + > > +After building, you should obtain this tree: > > + > > + output/images/ > > + +-- rootfs.tar > > + +-- barebox.bin > > + +-- uImage > > + > > +To boot the board you need MLO (primary bootloader) so download from below link > > +ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/images/MLO > > Hmm, can't we build MLO ourselves? The patch that makes that possible in barebox was just rejected in patchwork... [snip] > > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-cortexa8-linux-gnueabi" > > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y > > +BR2_TOOLCHAIN_EXTERNAL_CXX=y > > +BR2_TARGET_GENERIC_HOSTNAME="Cosmic-AM335x" > > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y > > +BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" > > +BR2_TARGET_GENERIC_GETTY_TERM="" > > +BR2_LINUX_KERNEL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/linux/linux-3.2.tar.bz2" > > No mainline support? 3.2 so still using board files... [snip] Regards, Arnout
>>>>> "Arnout" == Arnout Vandecappelle <arnout@mind.be> writes: Hi, >> > +To boot the board you need MLO (primary bootloader) so download from below link >> > +ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/images/MLO >> >> Hmm, can't we build MLO ourselves? > The patch that makes that possible in barebox was just rejected in > patchwork... Ahh, ok. I don't personally use barebox, but if people need this then presumably the patch can be resurrected. >> > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y >> > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/linux/linux-3.2.tar.bz2" >> >> No mainline support? > 3.2 so still using board files... Yeah. I don't think there's much need to stay at 3.2 for am335x nowadays though.
Dear Praveen kumar Vattipalli, On Tue, 28 Jan 2014 17:01:38 +0530, Praveen kumar Vattipalli wrote: > Signed-off-by: Praveen Kumar Vattipalli <praveen.v@phytec.in> > --- > board/cosmic-am335x/readme.txt | 54 ++++++++++++++++++++++++++++++ > configs/phytec_cosmic_am335x_defconfig | 57 ++++++++++++++++++++++++++++++++ > 2 files changed, 111 insertions(+) > create mode 100644 board/cosmic-am335x/readme.txt > create mode 100644 configs/phytec_cosmic_am335x_defconfig Thanks for your patch, but despite the feedback provided by Peter Korsgaard and Arnout Vandecappelle just a few days after you posted your patch, you never came back to us with an updated version of the patch. Since it's been 6 months now, I'll mark your patch as "Changes Requested" in our patch tracking system. Since we are definitely interested in seeing some defconfigs added for Phytec boards, do not hesitate to update your patch, take into account the comments made by Peter and Arnout, and resubmit it. Thanks a lot for your contribution! Thomas
diff --git a/board/cosmic-am335x/readme.txt b/board/cosmic-am335x/readme.txt new file mode 100644 index 0000000..62fd238 --- /dev/null +++ b/board/cosmic-am335x/readme.txt @@ -0,0 +1,54 @@ +Phytec Cosmic-AM335x Board. + +How to build it +=============== + +Configure Buildroot +------------------- + +The pcm051lb_defconfig configuration is a default configuration for Phytec Cosmic-AM335x Board. + + $ make phytec_cosmic_am335x_defconfig + +Build the rootfs +---------------- +You may now build your rootfs with: + + $ make + +This may take a long time. In this process it download some pakages,you need internet Connections. + +Result of the build +------------------- + +After building, you should obtain this tree: + + output/images/ + +-- rootfs.tar + +-- barebox.bin + +-- uImage + +To boot the board you need MLO (primary bootloader) so download from below link +ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/images/MLO + +Prepare you SDCard +================== + +For more information, download manual + + ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/doc/Cosmic-AM335x%20System%20Development%20User%20Manual.pdf + +Install the binaries to the SDCard +---------------------------------- + + cp MLO /media/boot + output/images/ + cp barebox.bin uImage /media/boot + tar -xvf rootfs.tar -C /media/rootfs + +Finish +====== + +Unmount all the partitions And eject your SDcard from your computer. + +Insert the SDcard into your cosmic, and power it up. Your new system should come up, now. diff --git a/configs/phytec_cosmic_am335x_defconfig b/configs/phytec_cosmic_am335x_defconfig new file mode 100644 index 0000000..94ba4ba --- /dev/null +++ b/configs/phytec_cosmic_am335x_defconfig @@ -0,0 +1,57 @@ +BR2_arm=y +BR2_cortex_a8=y +BR2_ARM_SOFT_FLOAT=y +BR2_JLEVEL=4 +BR2_DEPRECATED=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y +BR2_TOOLCHAIN_EXTERNAL_URL="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/tools/toolchain/arm-cortexa8-linux-gnueabi.tar.bz2" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-cortexa8-linux-gnueabi" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y +BR2_TOOLCHAIN_EXTERNAL_CXX=y +BR2_TARGET_GENERIC_HOSTNAME="Cosmic-AM335x" +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" +BR2_TARGET_GENERIC_GETTY_TERM="" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/linux/linux-3.2.tar.bz2" +BR2_LINUX_KERNEL_DEFCONFIG="pcm051lb" +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_TAR=y +BR2_PACKAGE_FBGRAB=y +BR2_PACKAGE_FBSET=y +BR2_PACKAGE_FB_TEST_APP=y +BR2_PACKAGE_FBV=y +BR2_PACKAGE_EVTEST=y +BR2_PACKAGE_I2C_TOOLS=y +BR2_PACKAGE_LZO=y +BR2_PACKAGE_LIBGPGME=y +BR2_PACKAGE_TSLIB=y +BR2_PACKAGE_LIBXML2=y +BR2_PACKAGE_NCURSES_TARGET_PANEL=y +BR2_PACKAGE_NCURSES_TARGET_FORM=y +BR2_PACKAGE_NCURSES_TARGET_MENU=y +BR2_PACKAGE_CAN_UTILS=y +BR2_PACKAGE_DHCP=y +BR2_PACKAGE_DHCP_SERVER=y +BR2_PACKAGE_DHCP_SERVER_DELAYED_ACK=y +BR2_PACKAGE_DHCP_CLIENT=y +BR2_PACKAGE_ETHTOOL=y +BR2_PACKAGE_IPERF=y +BR2_PACKAGE_IPROUTE2=y +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_IPKG=y +BR2_PACKAGE_OPKG=y +BR2_PACKAGE_RPM=y +BR2_PACKAGE_BASH=y +BR2_PACKAGE_DASH=y +BR2_PACKAGE_FILE=y +BR2_PACKAGE_TIME=y +BR2_PACKAGE_WHICH=y +BR2_TARGET_BAREBOX=y +BR2_TARGET_BAREBOX_CUSTOM_TARBALL=y +BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/bootloaders/barebox/barebox-2013.07.0.tar.bz2" +BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="pcm051lb"
Signed-off-by: Praveen Kumar Vattipalli <praveen.v@phytec.in> --- board/cosmic-am335x/readme.txt | 54 ++++++++++++++++++++++++++++++ configs/phytec_cosmic_am335x_defconfig | 57 ++++++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 board/cosmic-am335x/readme.txt create mode 100644 configs/phytec_cosmic_am335x_defconfig