@@ -7,4 +7,4 @@ graphical window is the framebuffer.
Startup time is slow because of the SMP CPU emulation so be patient.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-3.7.config
rename to board/qemu/microblazebe-mmu/linux-3.8.config
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-3.7.config
rename to board/qemu/microblazeel-mmu/linux-3.8.config
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/mips-malta/linux-3.7.config
rename to board/qemu/mips-malta/linux-3.8.config
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/mips64-malta/linux-3.7.config
rename to board/qemu/mips64-malta/linux-3.8.config
@@ -8,4 +8,4 @@ enabled.
This configuration is known to be flaky.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/mipsel-malta/linux-3.7.config
rename to board/qemu/mipsel-malta/linux-3.8.config
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/powerpc-g3beige/linux-3.7.config
rename to board/qemu/powerpc-g3beige/linux-3.8.config
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
The graphical window is the framebuffer.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
The graphical window is the framebuffer.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/x86/linux-3.7.config
rename to board/qemu/x86/linux-3.8.config
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the graphical window.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
similarity index 100%
rename from board/qemu/x86_64/linux-3.7.config
rename to board/qemu/x86_64/linux-3.8.config
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the graphical window.
-Tested with QEMU 1.3.0
+Tested with QEMU 1.4.0
@@ -14,12 +14,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySAC1"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
BR2_LINUX_KERNEL_ZIMAGE=y
@@ -16,7 +16,7 @@ BR2_KERNEL_HEADERS_3_7=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.9"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.7.config"
BR2_LINUX_KERNEL_ZIMAGE=y
@@ -14,12 +14,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_ZIMAGE=y
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.8.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"
@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.8.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"
@@ -10,15 +10,15 @@ BR2_PREFER_STATIC_LIB=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
@@ -6,15 +6,15 @@ BR2_mips_32r2=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
@@ -6,15 +6,15 @@ BR2_mips_32r2=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
@@ -6,15 +6,15 @@ BR2_powerpc_750=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
@@ -6,13 +6,13 @@ BR2_powerpc_8548=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
BR2_LINUX_KERNEL_VMLINUX=y
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Use soft float
BR2_SOFT_FLOAT=y
@@ -15,7 +15,7 @@ BR2_SOFT_FLOAT=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5"
BR2_LINUX_KERNEL_VMLINUX=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -20,7 +20,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.38"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.39"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
BR2_LINUX_KERNEL_ZIMAGE=y
@@ -12,6 +12,6 @@ BR2_KERNEL_HEADERS_3_7=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.9"
BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
BR2_LINUX_KERNEL_ZIMAGE=y
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.8.config"
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Lock to 3.7 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_7=y
+# Lock to 3.8 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.8.config"
Problematic configurations not bumped: arm-versatilepb - IRQ failure for symbios scsi sh4-r2d - Qemu still doesn't emulate advanced features from the UART sparc-ss10 - Illegal instruction Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> --- board/qemu/arm-nuri/readme.txt | 2 +- board/qemu/arm-versatile/readme.txt | 2 +- board/qemu/arm-vexpress/readme.txt | 2 +- .../qemu/microblazebe-mmu/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/microblazebe-mmu/readme.txt | 2 +- .../qemu/microblazeel-mmu/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/microblazeel-mmu/readme.txt | 2 +- board/qemu/mips-malta/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/mips-malta/readme.txt | 2 +- board/qemu/mips64-malta/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/mips64-malta/readme.txt | 2 +- board/qemu/mipsel-malta/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/mipsel-malta/readme.txt | 2 +- board/qemu/powerpc-g3beige/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/powerpc-g3beige/readme.txt | 2 +- board/qemu/powerpc-mpc8544ds/readme.txt | 2 +- board/qemu/powerpc-virtex-ml507/readme.txt | 2 +- board/qemu/sh4-r2d/readme.txt | 2 +- board/qemu/sparc-ss10/readme.txt | 2 +- board/qemu/x86/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/x86/readme.txt | 2 +- board/qemu/x86_64/{linux-3.7.config => linux-3.8.config} | 0 board/qemu/x86_64/readme.txt | 2 +- configs/qemu_arm_nuri_defconfig | 6 +++--- configs/qemu_arm_versatile_defconfig | 2 +- configs/qemu_arm_vexpress_defconfig | 6 +++--- configs/qemu_microblazebe_mmu_defconfig | 4 ++-- configs/qemu_microblazeel_mmu_defconfig | 4 ++-- configs/qemu_mips64_malta_defconfig | 8 ++++---- configs/qemu_mips_malta_defconfig | 8 ++++---- configs/qemu_mipsel_malta_defconfig | 8 ++++---- configs/qemu_ppc_g3beige_defconfig | 8 ++++---- configs/qemu_ppc_mpc8544ds_defconfig | 6 +++--- configs/qemu_ppc_virtex_ml507_defconfig | 6 +++--- configs/qemu_sh4_r2d_defconfig | 2 +- configs/qemu_sparc_ss10_defconfig | 2 +- configs/qemu_x86_64_defconfig | 8 ++++---- configs/qemu_x86_defconfig | 8 ++++---- 38 files changed, 58 insertions(+), 58 deletions(-) rename board/qemu/microblazebe-mmu/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/microblazeel-mmu/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/mips-malta/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/mips64-malta/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/mipsel-malta/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/powerpc-g3beige/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/x86/{linux-3.7.config => linux-3.8.config} (100%) rename board/qemu/x86_64/{linux-3.7.config => linux-3.8.config} (100%)