Message ID | 1347714423-13242-1-git-send-email-marek.belisko@open-nandra.com |
---|---|
State | Changes Requested |
Headers | show |
Nack. Though github provides a "download" tab, with a button to directly download the source tarball, the generated tarball url does contain the beginning of the commit sha1. So, the download url cannot be easily resolved, at least the current download infrastructure does not support it. To, use a fix url stating with "http://github.com/downloads/", the maintainers of a github project has to upload something. As ref, a thread also talking about github download urls: http://lists.busybox.net/pipermail/buildroot/2012-August/057570.html 2012/9/15 Marek Belisko <marek.belisko@open-nandra.com>: > Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> > --- > package/cpuload/cpuload.mk | 2 +- > package/input-event-daemon/input-event-daemon.mk | 2 +- > package/jsmin/jsmin.mk | 2 +- > package/libiqrf/libiqrf.mk | 2 +- > package/mtdev2tuio/mtdev2tuio.mk | 2 +- > package/omap-u-boot-utils/omap-u-boot-utils.mk | 2 +- > package/socketcand/socketcand.mk | 2 +- > package/ti-utils/ti-utils.mk | 2 +- > package/tslib/tslib.mk | 2 +- > package/yajl/yajl.mk | 2 +- > 10 files changed, 10 insertions(+), 10 deletions(-) BTW, in this list, only yajl does upload some material, but the tarball of the yajl version we use in BR in is not available for download on the download page... :( Regards,
On Sat, Sep 15, 2012 at 5:04 PM, Samuel Martin <s.martin49@gmail.com> wrote: > Nack. > > Though github provides a "download" tab, with a button to directly > download the source tarball, > the generated tarball url does contain the beginning of the commit sha1. > So, the download url cannot be easily resolved, at least the current > download infrastructure does not support it. I was too fast with this patch. I retest few packages and all was working so realized everything can be converted. I find a way how to get tar.gz from github but not sure if it will be accepted when post a patch: When define in mk file: RASPBERRYPI_FIRMWARE_VERSION = d29291e3e7d90f0137a1416845c7569cf291255e RASPBERRYPI_FIRMWARE_SOURCE = raspberrypi-firmware-$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz RASPBERRYPI_FIRMWARE_SITE = http://github.com/raspberrypi/firmware/tarball/master It start downloading correct git sha1: >>> raspberrypi-firmware d29291e3e7d90f0137a1416845c7569cf291255e Downloading --2012-09-15 21:31:37-- http://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz Resolving github.com (github.com)... 207.97.227.239 Connecting to github.com (github.com)|207.97.227.239|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz [following] --2012-09-15 21:31:37-- https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz Connecting to github.com (github.com)|207.97.227.239|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://nodeload.github.com/raspberrypi/firmware/tarball/master [following] --2012-09-15 21:31:38-- https://nodeload.github.com/raspberrypi/firmware/tarball/master Resolving nodeload.github.com (nodeload.github.com)... 207.97.227.252 Connecting to nodeload.github.com (nodeload.github.com)|207.97.227.252|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 102851634 (98M) [application/x-gzip] Saving to: `/home/open-nandra/projects/buildroot-new/dl/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz.tmp' Can I use this method? > > To, use a fix url stating with "http://github.com/downloads/", the > maintainers of a github project has to upload something. > > As ref, a thread also talking about github download urls: > http://lists.busybox.net/pipermail/buildroot/2012-August/057570.html > > > 2012/9/15 Marek Belisko <marek.belisko@open-nandra.com>: >> Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> >> --- >> package/cpuload/cpuload.mk | 2 +- >> package/input-event-daemon/input-event-daemon.mk | 2 +- >> package/jsmin/jsmin.mk | 2 +- >> package/libiqrf/libiqrf.mk | 2 +- >> package/mtdev2tuio/mtdev2tuio.mk | 2 +- >> package/omap-u-boot-utils/omap-u-boot-utils.mk | 2 +- >> package/socketcand/socketcand.mk | 2 +- >> package/ti-utils/ti-utils.mk | 2 +- >> package/tslib/tslib.mk | 2 +- >> package/yajl/yajl.mk | 2 +- >> 10 files changed, 10 insertions(+), 10 deletions(-) > > BTW, in this list, only yajl does upload some material, but the > tarball of the yajl version we use in BR in is not available for > download on the download page... :( > > Regards, > > -- > Sam Thanks, mbe
Hi Marek, all, 2012/9/15 Belisko Marek <marek.belisko@gmail.com>: > On Sat, Sep 15, 2012 at 5:04 PM, Samuel Martin <s.martin49@gmail.com> wrote: >> Nack. >> >> Though github provides a "download" tab, with a button to directly >> download the source tarball, >> the generated tarball url does contain the beginning of the commit sha1. >> So, the download url cannot be easily resolved, at least the current >> download infrastructure does not support it. > I was too fast with this patch. I retest few packages and all was working so > realized everything can be converted. > > I find a way how to get tar.gz from github but not sure if it will be accepted > when post a patch: > > When define in mk file: > RASPBERRYPI_FIRMWARE_VERSION = d29291e3e7d90f0137a1416845c7569cf291255e > RASPBERRYPI_FIRMWARE_SOURCE = > raspberrypi-firmware-$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz > RASPBERRYPI_FIRMWARE_SITE = > http://github.com/raspberrypi/firmware/tarball/master > > It start downloading correct git sha1: > >>>> raspberrypi-firmware d29291e3e7d90f0137a1416845c7569cf291255e Downloading > --2012-09-15 21:31:37-- > http://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz > Resolving github.com (github.com)... 207.97.227.239 > Connecting to github.com (github.com)|207.97.227.239|:80... connected. > HTTP request sent, awaiting response... 301 Moved Permanently > Location: https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz > [following] > --2012-09-15 21:31:37-- > https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz > Connecting to github.com (github.com)|207.97.227.239|:443... connected. > HTTP request sent, awaiting response... 302 Found > Location: https://nodeload.github.com/raspberrypi/firmware/tarball/master > [following] > --2012-09-15 21:31:38-- > https://nodeload.github.com/raspberrypi/firmware/tarball/master > Resolving nodeload.github.com (nodeload.github.com)... 207.97.227.252 > Connecting to nodeload.github.com > (nodeload.github.com)|207.97.227.252|:443... connected. > HTTP request sent, awaiting response... 200 OK > Length: 102851634 (98M) [application/x-gzip] > Saving to: `/home/open-nandra/projects/buildroot-new/dl/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz.tmp' > > Can I use this method? Of course you can! :-) BTW, quick tests show that the beginning of the sha1 is enough for github to match the revision you want to download, as well as prefixing the sha1 with 'g'. So, for example, it could be: RASPBERRYPI_FIRMWARE_VERSION = d29291e RASPBERRYPI_FIRMWARE_SOURCE = raspberrypi-firmware-g$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz or: RASPBERRYPI_FIRMWARE_VERSION = d29291e RASPBERRYPI_FIRMWARE_SOURCE = raspberrypi-firmware-$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz IMO, this is the way to go for non-tagged version. For tagged version, the following seems working fine (to be confirmed): CPULOAD_VERSION = v0.3 CPULOAD_SOURCE = kelvincheung-cpuload-$(CPULOAD_VERSION).tar.gz CPULOAD_SITE = http://github.com/kelvincheung/cpuload/$(CPULOAD_VERSION) If it is confirmed that this works, I'll definitely believe that's the way to go ;-) Care to give a try and resend a proper patch? And, don't hesitate to add some note in the doc about how to form *_SITE and *_SOURCE variables for github hosted projects. Cheers,
Hi Samuel, On Sat, Sep 15, 2012 at 10:32 PM, Samuel Martin <s.martin49@gmail.com> wrote: > Hi Marek, all, > > 2012/9/15 Belisko Marek <marek.belisko@gmail.com>: >> On Sat, Sep 15, 2012 at 5:04 PM, Samuel Martin <s.martin49@gmail.com> wrote: >>> Nack. >>> >>> Though github provides a "download" tab, with a button to directly >>> download the source tarball, >>> the generated tarball url does contain the beginning of the commit sha1. >>> So, the download url cannot be easily resolved, at least the current >>> download infrastructure does not support it. >> I was too fast with this patch. I retest few packages and all was working so >> realized everything can be converted. >> >> I find a way how to get tar.gz from github but not sure if it will be accepted >> when post a patch: >> >> When define in mk file: >> RASPBERRYPI_FIRMWARE_VERSION = d29291e3e7d90f0137a1416845c7569cf291255e >> RASPBERRYPI_FIRMWARE_SOURCE = >> raspberrypi-firmware-$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz >> RASPBERRYPI_FIRMWARE_SITE = >> http://github.com/raspberrypi/firmware/tarball/master >> >> It start downloading correct git sha1: >> >>>>> raspberrypi-firmware d29291e3e7d90f0137a1416845c7569cf291255e Downloading >> --2012-09-15 21:31:37-- >> http://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz >> Resolving github.com (github.com)... 207.97.227.239 >> Connecting to github.com (github.com)|207.97.227.239|:80... connected. >> HTTP request sent, awaiting response... 301 Moved Permanently >> Location: https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz >> [following] >> --2012-09-15 21:31:37-- >> https://github.com/raspberrypi/firmware/tarball/master/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz >> Connecting to github.com (github.com)|207.97.227.239|:443... connected. >> HTTP request sent, awaiting response... 302 Found >> Location: https://nodeload.github.com/raspberrypi/firmware/tarball/master >> [following] >> --2012-09-15 21:31:38-- >> https://nodeload.github.com/raspberrypi/firmware/tarball/master >> Resolving nodeload.github.com (nodeload.github.com)... 207.97.227.252 >> Connecting to nodeload.github.com >> (nodeload.github.com)|207.97.227.252|:443... connected. >> HTTP request sent, awaiting response... 200 OK >> Length: 102851634 (98M) [application/x-gzip] >> Saving to: `/home/open-nandra/projects/buildroot-new/dl/raspberrypi-firmware-d29291e3e7d90f0137a1416845c7569cf291255e.tar.gz.tmp' >> >> Can I use this method? > > Of course you can! :-) > > > BTW, quick tests show that the beginning of the sha1 is enough for > github to match the revision you want to download, as well as > prefixing the sha1 with 'g'. > So, for example, it could be: > RASPBERRYPI_FIRMWARE_VERSION = d29291e > RASPBERRYPI_FIRMWARE_SOURCE = > raspberrypi-firmware-g$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz > or: > RASPBERRYPI_FIRMWARE_VERSION = d29291e > RASPBERRYPI_FIRMWARE_SOURCE = > raspberrypi-firmware-$(RASPBERRYPI_FIRMWARE_VERSION).tar.gz Yes I confirmed this method also work. > > IMO, this is the way to go for non-tagged version. > > For tagged version, the following seems working fine (to be confirmed): > CPULOAD_VERSION = v0.3 > CPULOAD_SOURCE = kelvincheung-cpuload-$(CPULOAD_VERSION).tar.gz > CPULOAD_SITE = http://github.com/kelvincheung/cpuload/$(CPULOAD_VERSION) This will work but this way: CPULOAD_SITE = http://github.com/kelvincheung/cpuload/tarball/$(CPULOAD_VERSION) (same is used in package package/sqlcipher/sqlcipher.mk) > > If it is confirmed that this works, I'll definitely believe that's the > way to go ;-) > > Care to give a try and resend a proper patch? > And, don't hesitate to add some note in the doc about how to form > *_SITE and *_SOURCE variables for github hosted projects. Sure. Will do. > > > Cheers, > > -- > Sam Thanks, mbe
diff --git a/package/cpuload/cpuload.mk b/package/cpuload/cpuload.mk index d25c504..6bbe969 100644 --- a/package/cpuload/cpuload.mk +++ b/package/cpuload/cpuload.mk @@ -5,7 +5,7 @@ ############################################################# CPULOAD_VERSION = v0.3 -CPULOAD_SITE = git://github.com/kelvincheung/cpuload.git +CPULOAD_SITE = http://github.com/downloads/kelvincheung/cpuload CPULOAD_LICENSE = GPLv2 CPULOAD_LICENSE_FILES = COPYING diff --git a/package/input-event-daemon/input-event-daemon.mk b/package/input-event-daemon/input-event-daemon.mk index f99bfbe..c1be637 100644 --- a/package/input-event-daemon/input-event-daemon.mk +++ b/package/input-event-daemon/input-event-daemon.mk @@ -5,7 +5,7 @@ ############################################################# INPUT_EVENT_DAEMON_VERSION = v0.1.3 -INPUT_EVENT_DAEMON_SITE = git://github.com/gandro/input-event-daemon.git +INPUT_EVENT_DAEMON_SITE = http://github.com/downloads/gandro/input-event-daemon INPUT_EVENT_DAEMON_LICENSE = input-event-daemon license INPUT_EVENT_DAEMON_LICENSE_FILES = README diff --git a/package/jsmin/jsmin.mk b/package/jsmin/jsmin.mk index fb8c214..d7a9f76 100644 --- a/package/jsmin/jsmin.mk +++ b/package/jsmin/jsmin.mk @@ -1,5 +1,5 @@ JSMIN_VERSION = a9b47554d5684a55301a2eb7ca8480b7ee7630d4 -JSMIN_SITE = git://github.com/douglascrockford/JSMin.git +JSMIN_SITE = http://github.com/downloads/douglascrockford/JSMin define JSMIN_BUILD_CMDS $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) jsmin diff --git a/package/libiqrf/libiqrf.mk b/package/libiqrf/libiqrf.mk index 4cf1541..59dffa2 100644 --- a/package/libiqrf/libiqrf.mk +++ b/package/libiqrf/libiqrf.mk @@ -5,7 +5,7 @@ ############################################################# LIBIQRF_VERSION = v0.1.0 -LIBIQRF_SITE = git://github.com/nandra/libiqrf.git +LIBIQRF_SITE = http://github.com/downloads/nandra/libiqrf LIBIQRF_INSTALL_STAGING = YES LIBIQRF_DEPENDENCIES = libusb diff --git a/package/mtdev2tuio/mtdev2tuio.mk b/package/mtdev2tuio/mtdev2tuio.mk index a86c0bf..e93e3fc 100644 --- a/package/mtdev2tuio/mtdev2tuio.mk +++ b/package/mtdev2tuio/mtdev2tuio.mk @@ -4,7 +4,7 @@ # ############################################################# MTDEV2TUIO_VERSION = e1e7378d86 -MTDEV2TUIO_SITE = git://github.com/olivopaolo/mtdev2tuio.git +MTDEV2TUIO_SITE = http://github.com/downloads/olivopaolo/mtdev2tuio MTDEV2TUIO_DEPENDENCIES = mtdev liblo MTDEV2TUIO_LICENSE = GPLv3+ MTDEV2TUIO_LICENSE_FILES = COPYING diff --git a/package/omap-u-boot-utils/omap-u-boot-utils.mk b/package/omap-u-boot-utils/omap-u-boot-utils.mk index 8405f62..51508de 100644 --- a/package/omap-u-boot-utils/omap-u-boot-utils.mk +++ b/package/omap-u-boot-utils/omap-u-boot-utils.mk @@ -5,7 +5,7 @@ ############################################################# OMAP_U_BOOT_UTILS_VERSION = 8aff852322 -OMAP_U_BOOT_UTILS_SITE = http://github.com/nmenon/omap-u-boot-utils.git +OMAP_U_BOOT_UTILS_SITE = http://github.com/downloads/nmenon/omap-u-boot-utils OMAP_U_BOOT_UTILS_SITE_METHOD = git define HOST_OMAP_U_BOOT_UTILS_BUILD_CMDS diff --git a/package/socketcand/socketcand.mk b/package/socketcand/socketcand.mk index a1e672f..ff65d85 100644 --- a/package/socketcand/socketcand.mk +++ b/package/socketcand/socketcand.mk @@ -4,7 +4,7 @@ # ############################################################# SOCKETCAND_VERSION = 7d06986fa4b5fd2c210ec4e248dab41107be1ccd -SOCKETCAND_SITE = git://github.com/dschanoeh/socketcand.git +SOCKETCAND_SITE = http://github.com/downloads/dschanoeh/socketcand SOCKETCAND_AUTORECONF = YES SOCKETCAND_DEPENDENCIES = libconfig diff --git a/package/ti-utils/ti-utils.mk b/package/ti-utils/ti-utils.mk index ac54370..4f8b320 100644 --- a/package/ti-utils/ti-utils.mk +++ b/package/ti-utils/ti-utils.mk @@ -5,7 +5,7 @@ ############################################################# TI_UTILS_VERSION = 06dbdb2727354b5f3ad7c723897f40051fddee49 -TI_UTILS_SITE = git://github.com/gxk/ti-utils.git +TI_UTILS_SITE = http://github.com/downloads/gxk/ti-utils TI_UTILS_DEPENDENCIES = libnl define TI_UTILS_BUILD_CMDS diff --git a/package/tslib/tslib.mk b/package/tslib/tslib.mk index 8f30c25..1650bd7 100644 --- a/package/tslib/tslib.mk +++ b/package/tslib/tslib.mk @@ -4,7 +4,7 @@ # ############################################################# TSLIB_VERSION = 412d99d8b92c -TSLIB_SITE = git://github.com/kergoth/tslib.git +TSLIB_SITE = http://github.com/downloads/kergoth/tslib TSLIB_AUTORECONF = YES TSLIB_INSTALL_STAGING = YES TSLIB_INSTALL_STAGING_OPT = DESTDIR=$(STAGING_DIR) LDFLAGS=-L$(STAGING_DIR)/usr/lib install diff --git a/package/yajl/yajl.mk b/package/yajl/yajl.mk index 9cebeb7..b1d7fca 100644 --- a/package/yajl/yajl.mk +++ b/package/yajl/yajl.mk @@ -5,7 +5,7 @@ ################################################################################ YAJL_VERSION = 2.0.4 -YAJL_SITE = git://github.com/lloyd/yajl.git +YAJL_SITE = http://github.com/downloads/lloyd/yaju YAJL_INSTALL_STAGING = YES YAJL_LICENSE = ISC YAJL_LICENSE_FILES = COPYING
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> --- package/cpuload/cpuload.mk | 2 +- package/input-event-daemon/input-event-daemon.mk | 2 +- package/jsmin/jsmin.mk | 2 +- package/libiqrf/libiqrf.mk | 2 +- package/mtdev2tuio/mtdev2tuio.mk | 2 +- package/omap-u-boot-utils/omap-u-boot-utils.mk | 2 +- package/socketcand/socketcand.mk | 2 +- package/ti-utils/ti-utils.mk | 2 +- package/tslib/tslib.mk | 2 +- package/yajl/yajl.mk | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-)