mbox series

[U-Boot] Pull request: u-boot-sunxi/master

Message ID 20181113191945.23286-1-jagan@amarulasolutions.com
State Accepted
Delegated to: Tom Rini
Headers show
Series [U-Boot] Pull request: u-boot-sunxi/master | expand

Pull-request

git://git.denx.de/u-boot-sunxi.git master

Message

Jagan Teki Nov. 13, 2018, 7:19 p.m. UTC 
Hi Tom,

Please pull this PR.

thanks,
Jagan.

The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:

  Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)

are available in the Git repository at:

  git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:

  sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)

----------------------------------------------------------------
Andre Przywara (4):
      sunxi: A64: Update .dts/.dtsi files
      sunxi: A64: Re-add syscon to DT node
      sunxi: H3/H5: Update .dts files
      sunxi: A64: Add Pine64-LTS board

Icenowy Zheng (1):
      sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD

Jagan Teki (2):
      arm64: allwinner: h6: Add common orangepi nodes into dtsi
      board: allwinner: sun50i-h6: Add Orangepi Lite2 support

Jun Nie (1):
      sunxi: add support for Banana Pi M2 Zero board

Marek Vasut (1):
      sunxi: Imply fitImage support

Vasily Khoruzhick (4):
      mmc: sunxi: add support for automatic delay calibration
      dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing
      sun50i: A64: add support for R_I2C controller
      sunxi: DT: add support for Pinebook

 arch/arm/Kconfig                                |   1 +
 arch/arm/dts/Makefile                           |   3 +
 arch/arm/dts/sun50i-a64-amarula-relic.dts       | 168 ++++++++++++-
 arch/arm/dts/sun50i-a64-bananapi-m64.dts        |  34 ++-
 arch/arm/dts/sun50i-a64-nanopi-a64.dts          |  89 ++++++-
 arch/arm/dts/sun50i-a64-olinuxino.dts           | 103 +++++++-
 arch/arm/dts/sun50i-a64-orangepi-win.dts        | 179 +++++++++++++-
 arch/arm/dts/sun50i-a64-pine64-lts.dts          |  13 +
 arch/arm/dts/sun50i-a64-pine64.dts              |  32 ++-
 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi    |  15 ++
 arch/arm/dts/sun50i-a64-pinebook.dts            | 294 ++++++++++++++++++++++
 arch/arm/dts/sun50i-a64-sopine-baseboard.dts    |  32 ++-
 arch/arm/dts/sun50i-a64-sopine.dtsi             |  15 ++
 arch/arm/dts/sun50i-a64.dtsi                    | 312 ++++++++++++++++++++++--
 arch/arm/dts/sun50i-h5-orangepi-pc2.dts         |  12 +
 arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   |   2 -
 arch/arm/dts/sun50i-h6-orangepi-lite2.dts       |  11 +
 arch/arm/dts/sun50i-h6-orangepi-one-plus.dts    | 140 +----------
 arch/arm/dts/sun50i-h6-orangepi.dtsi            | 150 ++++++++++++
 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
 arch/arm/dts/sun8i-h3.dtsi                      |  31 +++
 arch/arm/dts/sunxi-h3-h5.dtsi                   |   2 -
 arch/arm/include/asm/arch-sunxi/gpio.h          |   1 +
 arch/arm/include/asm/arch-sunxi/mmc.h           |   6 +-
 arch/arm/mach-sunxi/Kconfig                     |   1 +
 arch/arm/mach-sunxi/clock_sun6i.c               |   4 +
 board/sunxi/MAINTAINERS                         |  10 +
 board/sunxi/board.c                             |   6 +
 configs/bananapi_m2_zero_defconfig              |  13 +
 configs/orangepi_lite2_defconfig                |  12 +
 configs/pine64-lts_defconfig                    |  19 ++
 configs/pinebook_defconfig                      |  22 ++
 drivers/mmc/sunxi_mmc.c                         |  21 +-
 drivers/video/bridge/video-bridge-uclass.c      |  16 +-
 drivers/video/sunxi/lcdc.c                      |  22 +-
 35 files changed, 1710 insertions(+), 202 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
 create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
 create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
 create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
 create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
 create mode 100644 configs/bananapi_m2_zero_defconfig
 create mode 100644 configs/orangepi_lite2_defconfig
 create mode 100644 configs/pine64-lts_defconfig
 create mode 100644 configs/pinebook_defconfig

Comments

Tom Rini Nov. 13, 2018, 7:42 p.m. UTC | #1 
On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:

> Hi Tom,
> 
> Please pull this PR.
> 
> thanks,
> Jagan.
> 
> The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
> 
>   Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
> 
> are available in the Git repository at:
> 
>   git://git.denx.de/u-boot-sunxi.git master
> 
> for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
> 
>   sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
> 
> ----------------------------------------------------------------
> Andre Przywara (4):
>       sunxi: A64: Update .dts/.dtsi files
>       sunxi: A64: Re-add syscon to DT node
>       sunxi: H3/H5: Update .dts files
>       sunxi: A64: Add Pine64-LTS board
> 
> Icenowy Zheng (1):
>       sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> 
> Jagan Teki (2):
>       arm64: allwinner: h6: Add common orangepi nodes into dtsi
>       board: allwinner: sun50i-h6: Add Orangepi Lite2 support
> 
> Jun Nie (1):
>       sunxi: add support for Banana Pi M2 Zero board
> 
> Marek Vasut (1):
>       sunxi: Imply fitImage support
> 
> Vasily Khoruzhick (4):
>       mmc: sunxi: add support for automatic delay calibration
>       dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing
>       sun50i: A64: add support for R_I2C controller
>       sunxi: DT: add support for Pinebook
> 
>  arch/arm/Kconfig                                |   1 +
>  arch/arm/dts/Makefile                           |   3 +
>  arch/arm/dts/sun50i-a64-amarula-relic.dts       | 168 ++++++++++++-
>  arch/arm/dts/sun50i-a64-bananapi-m64.dts        |  34 ++-
>  arch/arm/dts/sun50i-a64-nanopi-a64.dts          |  89 ++++++-
>  arch/arm/dts/sun50i-a64-olinuxino.dts           | 103 +++++++-
>  arch/arm/dts/sun50i-a64-orangepi-win.dts        | 179 +++++++++++++-
>  arch/arm/dts/sun50i-a64-pine64-lts.dts          |  13 +
>  arch/arm/dts/sun50i-a64-pine64.dts              |  32 ++-
>  arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi    |  15 ++
>  arch/arm/dts/sun50i-a64-pinebook.dts            | 294 ++++++++++++++++++++++
>  arch/arm/dts/sun50i-a64-sopine-baseboard.dts    |  32 ++-
>  arch/arm/dts/sun50i-a64-sopine.dtsi             |  15 ++
>  arch/arm/dts/sun50i-a64.dtsi                    | 312 ++++++++++++++++++++++--
>  arch/arm/dts/sun50i-h5-orangepi-pc2.dts         |  12 +
>  arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   |   2 -
>  arch/arm/dts/sun50i-h6-orangepi-lite2.dts       |  11 +
>  arch/arm/dts/sun50i-h6-orangepi-one-plus.dts    | 140 +----------
>  arch/arm/dts/sun50i-h6-orangepi.dtsi            | 150 ++++++++++++
>  arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
>  arch/arm/dts/sun8i-h3.dtsi                      |  31 +++
>  arch/arm/dts/sunxi-h3-h5.dtsi                   |   2 -
>  arch/arm/include/asm/arch-sunxi/gpio.h          |   1 +
>  arch/arm/include/asm/arch-sunxi/mmc.h           |   6 +-
>  arch/arm/mach-sunxi/Kconfig                     |   1 +
>  arch/arm/mach-sunxi/clock_sun6i.c               |   4 +
>  board/sunxi/MAINTAINERS                         |  10 +
>  board/sunxi/board.c                             |   6 +
>  configs/bananapi_m2_zero_defconfig              |  13 +
>  configs/orangepi_lite2_defconfig                |  12 +
>  configs/pine64-lts_defconfig                    |  19 ++
>  configs/pinebook_defconfig                      |  22 ++
>  drivers/mmc/sunxi_mmc.c                         |  21 +-
>  drivers/video/bridge/video-bridge-uclass.c      |  16 +-
>  drivers/video/sunxi/lcdc.c                      |  22 +-
>  35 files changed, 1710 insertions(+), 202 deletions(-)
>  create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
>  create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
>  create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
>  create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
>  create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
>  create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>  create mode 100644 configs/bananapi_m2_zero_defconfig
>  create mode 100644 configs/orangepi_lite2_defconfig
>  create mode 100644 configs/pine64-lts_defconfig
>  create mode 100644 configs/pinebook_defconfig

This seems to be somewhat the opposite of the SPI PR in that it's not
just fixing up a few corner cases and so forth, so I assume you intend
me to pull this after the release.
Jagan Teki Nov. 13, 2018, 8:05 p.m. UTC | #2 
On Wed 14 Nov, 2018, 1:12 AM Tom Rini <trini@konsulko.com wrote:

> On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:
>
> > Hi Tom,
> >
> > Please pull this PR.
> >
> > thanks,
> > Jagan.
> >
> > The following changes since commit
> 454cf76184c65426b68033a23da086e73663f2fc:
> >
> >   Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
> >
> > are available in the Git repository at:
> >
> >   git://git.denx.de/u-boot-sunxi.git master
> >
> > for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
> >
> >   sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> (2018-11-13 22:17:06 +0530)
> >
> > ----------------------------------------------------------------
> > Andre Przywara (4):
> >       sunxi: A64: Update .dts/.dtsi files
> >       sunxi: A64: Re-add syscon to DT node
> >       sunxi: H3/H5: Update .dts files
> >       sunxi: A64: Add Pine64-LTS board
> >
> > Icenowy Zheng (1):
> >       sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> >
> > Jagan Teki (2):
> >       arm64: allwinner: h6: Add common orangepi nodes into dtsi
> >       board: allwinner: sun50i-h6: Add Orangepi Lite2 support
> >
> > Jun Nie (1):
> >       sunxi: add support for Banana Pi M2 Zero board
> >
> > Marek Vasut (1):
> >       sunxi: Imply fitImage support
> >
> > Vasily Khoruzhick (4):
> >       mmc: sunxi: add support for automatic delay calibration
> >       dm: video: bridge: don't fail to activate bridge if reset or sleep
> GPIO is missing
> >       sun50i: A64: add support for R_I2C controller
> >       sunxi: DT: add support for Pinebook
> >
> >  arch/arm/Kconfig                                |   1 +
> >  arch/arm/dts/Makefile                           |   3 +
> >  arch/arm/dts/sun50i-a64-amarula-relic.dts       | 168 ++++++++++++-
> >  arch/arm/dts/sun50i-a64-bananapi-m64.dts        |  34 ++-
> >  arch/arm/dts/sun50i-a64-nanopi-a64.dts          |  89 ++++++-
> >  arch/arm/dts/sun50i-a64-olinuxino.dts           | 103 +++++++-
> >  arch/arm/dts/sun50i-a64-orangepi-win.dts        | 179 +++++++++++++-
> >  arch/arm/dts/sun50i-a64-pine64-lts.dts          |  13 +
> >  arch/arm/dts/sun50i-a64-pine64.dts              |  32 ++-
> >  arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi    |  15 ++
> >  arch/arm/dts/sun50i-a64-pinebook.dts            | 294
> ++++++++++++++++++++++
> >  arch/arm/dts/sun50i-a64-sopine-baseboard.dts    |  32 ++-
> >  arch/arm/dts/sun50i-a64-sopine.dtsi             |  15 ++
> >  arch/arm/dts/sun50i-a64.dtsi                    | 312
> ++++++++++++++++++++++--
> >  arch/arm/dts/sun50i-h5-orangepi-pc2.dts         |  12 +
> >  arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   |   2 -
> >  arch/arm/dts/sun50i-h6-orangepi-lite2.dts       |  11 +
> >  arch/arm/dts/sun50i-h6-orangepi-one-plus.dts    | 140 +----------
> >  arch/arm/dts/sun50i-h6-orangepi.dtsi            | 150 ++++++++++++
> >  arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
> >  arch/arm/dts/sun8i-h3.dtsi                      |  31 +++
> >  arch/arm/dts/sunxi-h3-h5.dtsi                   |   2 -
> >  arch/arm/include/asm/arch-sunxi/gpio.h          |   1 +
> >  arch/arm/include/asm/arch-sunxi/mmc.h           |   6 +-
> >  arch/arm/mach-sunxi/Kconfig                     |   1 +
> >  arch/arm/mach-sunxi/clock_sun6i.c               |   4 +
> >  board/sunxi/MAINTAINERS                         |  10 +
> >  board/sunxi/board.c                             |   6 +
> >  configs/bananapi_m2_zero_defconfig              |  13 +
> >  configs/orangepi_lite2_defconfig                |  12 +
> >  configs/pine64-lts_defconfig                    |  19 ++
> >  configs/pinebook_defconfig                      |  22 ++
> >  drivers/mmc/sunxi_mmc.c                         |  21 +-
> >  drivers/video/bridge/video-bridge-uclass.c      |  16 +-
> >  drivers/video/sunxi/lcdc.c                      |  22 +-
> >  35 files changed, 1710 insertions(+), 202 deletions(-)
> >  create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
> >  create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> >  create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> >  create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> >  create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
> >  create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >  create mode 100644 configs/bananapi_m2_zero_defconfig
> >  create mode 100644 configs/orangepi_lite2_defconfig
> >  create mode 100644 configs/pine64-lts_defconfig
> >  create mode 100644 configs/pinebook_defconfig
>
> This seems to be somewhat the opposite of the SPI PR in that it's not
> just fixing up a few corner cases and so forth, so I assume you intend
> me to pull this after the release.
>

Correct.
Tom Rini Nov. 15, 2018, 9:04 p.m. UTC | #3 
On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:

> Hi Tom,
> 
> Please pull this PR.
> 
> thanks,
> Jagan.
> 
> The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
> 
>   Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
> 
> are available in the Git repository at:
> 
>   git://git.denx.de/u-boot-sunxi.git master
> 
> for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
> 
>   sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
> 

Applied to u-boot/master, thanks!