[3/3] ARM: dts: stm32: Add hwlock for pinctrl
diff mbox series

Message ID 20181113095142.32015-4-benjamin.gaignard@st.com
State New
Headers show
Series
  • make pin-controller use hwspinlock
Related show

Commit Message

Benjamin Gaignard Nov. 13, 2018, 9:51 a.m. UTC
Define a hwspinlock to be used by pin-controller

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 1 +
 1 file changed, 1 insertion(+)

Comments

Alexandre Torgue Nov. 13, 2018, 9:58 a.m. UTC | #1
Hi Benjamin

On 11/13/18 10:51 AM, Benjamin Gaignard wrote:
> Define a hwspinlock to be used by pin-controller
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 

In commit title please add for which SoC it is targeted. If you don't 
have to send new version for driver or dt-bindings, I will do it when 
I'll apply.

regards
Alex

> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> index c4851271e810..2886e5a6ac27 100644
> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> @@ -14,6 +14,7 @@
>   			ranges = <0 0x50002000 0xa400>;
>   			interrupt-parent = <&exti>;
>   			st,syscfg = <&exti 0x60 0xff>;
> +			hwlocks = <&hsem 0>;
>   			pins-are-numbered;
>   
>   			gpioa: gpio@50002000 {
>

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index c4851271e810..2886e5a6ac27 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -14,6 +14,7 @@ 
 			ranges = <0 0x50002000 0xa400>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
+			hwlocks = <&hsem 0>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {