Patchwork pci: Update pci_regs header

login
register
mail settings
Submitter Jan Kiszka
Date June 9, 2011, 7:18 a.m.
Message ID <4DF073C6.4000902@web.de>
Download mbox | patch
Permalink /patch/99640/
State New
Headers show

Comments

Jan Kiszka - June 9, 2011, 7:18 a.m.
From: Jan Kiszka <jan.kiszka@siemens.com>

Pulls in latest version from kernel 3.0-rc2.

Some changes around AER now require local defines as QEMU accesses the
error source identification register via sub-words.

CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---

I don't think the #define requirements of pcie_aer are upstream
compatible, therefore private constants.

This will allow to drop libpci build dependency from qemu-kvm.

 hw/pci_regs.h |   60 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
 hw/pcie_aer.c |    9 ++++++-
 2 files changed, 62 insertions(+), 7 deletions(-)
Isaku Yamahata - June 9, 2011, 10:36 a.m.
pcie_aer.c change looks good.
Thanks.

On Thu, Jun 09, 2011 at 09:18:30AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> Pulls in latest version from kernel 3.0-rc2.
> 
> Some changes around AER now require local defines as QEMU accesses the
> error source identification register via sub-words.
> 
> CC: Isaku Yamahata <yamahata@valinux.co.jp>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> 
> I don't think the #define requirements of pcie_aer are upstream
> compatible, therefore private constants.
> 
> This will allow to drop libpci build dependency from qemu-kvm.
> 
>  hw/pci_regs.h |   60 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
>  hw/pcie_aer.c |    9 ++++++-
>  2 files changed, 62 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/pci_regs.h b/hw/pci_regs.h
> index 5a5ab89..e884096 100644
> --- a/hw/pci_regs.h
> +++ b/hw/pci_regs.h
> @@ -300,12 +300,22 @@
>  #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
>  #define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
>  
> -/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
> +/* MSI-X registers */
>  #define PCI_MSIX_FLAGS		2
>  #define  PCI_MSIX_FLAGS_QSIZE	0x7FF
>  #define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
>  #define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
> -#define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
> +#define PCI_MSIX_TABLE		4
> +#define PCI_MSIX_PBA		8
> +#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
> +
> +/* MSI-X entry's format */
> +#define PCI_MSIX_ENTRY_SIZE		16
> +#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
> +#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
> +#define  PCI_MSIX_ENTRY_DATA		8
> +#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
> +#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
>  
>  /* CompactPCI Hotswap Register */
>  
> @@ -365,6 +375,11 @@
>  #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
>  #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
>  
> +/* PCI Bridge Subsystem ID registers */
> +
> +#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
> +#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
> +
>  /* PCI Express capability registers */
>  
>  #define PCI_EXP_FLAGS		2	/* Capabilities register */
> @@ -420,7 +435,7 @@
>  #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
>  #define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
>  #define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
> -#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
> +#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
>  #define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
>  #define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
>  #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
> @@ -437,7 +452,10 @@
>  #define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
>  #define PCI_EXP_LNKSTA		18	/* Link Status */
>  #define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
> +#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
> +#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
>  #define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
> +#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
>  #define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
>  #define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
>  #define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
> @@ -486,10 +504,22 @@
>  #define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
>  #define PCI_EXP_RTCAP		30	/* Root Capabilities */
>  #define PCI_EXP_RTSTA		32	/* Root Status */
> +#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
> +#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
>  #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
>  #define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
> +#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
> +#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
> +#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
> +#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
>  #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
>  #define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
> +#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
> +#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
> +#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
> +#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
> +#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
> +#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
>  #define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
>  #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
>  
> @@ -502,9 +532,12 @@
>  #define PCI_EXT_CAP_ID_VC	2
>  #define PCI_EXT_CAP_ID_DSN	3
>  #define PCI_EXT_CAP_ID_PWR	4
> +#define PCI_EXT_CAP_ID_VNDR	11
> +#define PCI_EXT_CAP_ID_ACS	13
>  #define PCI_EXT_CAP_ID_ARI	14
>  #define PCI_EXT_CAP_ID_ATS	15
>  #define PCI_EXT_CAP_ID_SRIOV	16
> +#define PCI_EXT_CAP_ID_LTR	24
>  
>  /* Advanced Error Reporting */
>  #define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
> @@ -556,8 +589,7 @@
>  #define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
>  #define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
>  #define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
> -#define PCI_ERR_ROOT_COR_SRC	52
> -#define PCI_ERR_ROOT_SRC	54
> +#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
>  
>  /* Virtual Channel */
>  #define PCI_VC_PORT_REG1	4
> @@ -662,4 +694,22 @@
>  #define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
>  #define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
>  
> +#define PCI_LTR_MAX_SNOOP_LAT	0x4
> +#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
> +#define  PCI_LTR_VALUE_MASK	0x000003ff
> +#define  PCI_LTR_SCALE_MASK	0x00001c00
> +#define  PCI_LTR_SCALE_SHIFT	10
> +
> +/* Access Control Service */
> +#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
> +#define  PCI_ACS_SV		0x01	/* Source Validation */
> +#define  PCI_ACS_TB		0x02	/* Translation Blocking */
> +#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
> +#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
> +#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
> +#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
> +#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
> +#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
> +#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
> +
>  #endif /* LINUX_PCI_REGS_H */
> diff --git a/hw/pcie_aer.c b/hw/pcie_aer.c
> index f08d3c7..be019c7 100644
> --- a/hw/pcie_aer.c
> +++ b/hw/pcie_aer.c
> @@ -38,6 +38,9 @@
>  #define PCIE_DEV_PRINTF(dev, fmt, ...)                                  \
>      PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
>  
> +#define PCI_ERR_SRC_COR_OFFS    0
> +#define PCI_ERR_SRC_UNCOR_OFFS  2
> +
>  /* From 6.2.7 Error Listing and Rules. Table 6-2, 6-3 and 6-4 */
>  static uint32_t pcie_aer_uncor_default_severity(uint32_t status)
>  {
> @@ -320,7 +323,8 @@ static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
>          if (root_status & PCI_ERR_ROOT_COR_RCV) {
>              root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
>          } else {
> -            pci_set_word(aer_cap + PCI_ERR_ROOT_COR_SRC, msg->source_id);
> +            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC + PCI_ERR_SRC_COR_OFFS,
> +                         msg->source_id);
>          }
>          root_status |= PCI_ERR_ROOT_COR_RCV;
>          break;
> @@ -341,7 +345,8 @@ static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
>          if (root_status & PCI_ERR_ROOT_UNCOR_RCV) {
>              root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
>          } else {
> -            pci_set_word(aer_cap + PCI_ERR_ROOT_SRC, msg->source_id);
> +            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC +
> +                         PCI_ERR_SRC_UNCOR_OFFS, msg->source_id);
>          }
>          root_status |= PCI_ERR_ROOT_UNCOR_RCV;
>      }
> -- 
> 1.7.1
>
Michael S. Tsirkin - June 9, 2011, 2:24 p.m.
On Thu, Jun 09, 2011 at 09:18:30AM +0200, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> Pulls in latest version from kernel 3.0-rc2.
> 
> Some changes around AER now require local defines as QEMU accesses the
> error source identification register via sub-words.
> 
> CC: Isaku Yamahata <yamahata@valinux.co.jp>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

Thanks, applied.

> ---
> 
> I don't think the #define requirements of pcie_aer are upstream
> compatible, therefore private constants.
> 
> This will allow to drop libpci build dependency from qemu-kvm.
> 
>  hw/pci_regs.h |   60 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
>  hw/pcie_aer.c |    9 ++++++-
>  2 files changed, 62 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/pci_regs.h b/hw/pci_regs.h
> index 5a5ab89..e884096 100644
> --- a/hw/pci_regs.h
> +++ b/hw/pci_regs.h
> @@ -300,12 +300,22 @@
>  #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
>  #define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
>  
> -/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
> +/* MSI-X registers */
>  #define PCI_MSIX_FLAGS		2
>  #define  PCI_MSIX_FLAGS_QSIZE	0x7FF
>  #define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
>  #define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
> -#define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
> +#define PCI_MSIX_TABLE		4
> +#define PCI_MSIX_PBA		8
> +#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
> +
> +/* MSI-X entry's format */
> +#define PCI_MSIX_ENTRY_SIZE		16
> +#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
> +#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
> +#define  PCI_MSIX_ENTRY_DATA		8
> +#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
> +#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
>  
>  /* CompactPCI Hotswap Register */
>  
> @@ -365,6 +375,11 @@
>  #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
>  #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
>  
> +/* PCI Bridge Subsystem ID registers */
> +
> +#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
> +#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
> +
>  /* PCI Express capability registers */
>  
>  #define PCI_EXP_FLAGS		2	/* Capabilities register */
> @@ -420,7 +435,7 @@
>  #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
>  #define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
>  #define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
> -#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
> +#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
>  #define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
>  #define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
>  #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
> @@ -437,7 +452,10 @@
>  #define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
>  #define PCI_EXP_LNKSTA		18	/* Link Status */
>  #define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
> +#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
> +#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
>  #define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
> +#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
>  #define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
>  #define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
>  #define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
> @@ -486,10 +504,22 @@
>  #define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
>  #define PCI_EXP_RTCAP		30	/* Root Capabilities */
>  #define PCI_EXP_RTSTA		32	/* Root Status */
> +#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
> +#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
>  #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
>  #define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
> +#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
> +#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
> +#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
> +#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
>  #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
>  #define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
> +#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
> +#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
> +#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
> +#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
> +#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
> +#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
>  #define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
>  #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
>  
> @@ -502,9 +532,12 @@
>  #define PCI_EXT_CAP_ID_VC	2
>  #define PCI_EXT_CAP_ID_DSN	3
>  #define PCI_EXT_CAP_ID_PWR	4
> +#define PCI_EXT_CAP_ID_VNDR	11
> +#define PCI_EXT_CAP_ID_ACS	13
>  #define PCI_EXT_CAP_ID_ARI	14
>  #define PCI_EXT_CAP_ID_ATS	15
>  #define PCI_EXT_CAP_ID_SRIOV	16
> +#define PCI_EXT_CAP_ID_LTR	24
>  
>  /* Advanced Error Reporting */
>  #define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
> @@ -556,8 +589,7 @@
>  #define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
>  #define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
>  #define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
> -#define PCI_ERR_ROOT_COR_SRC	52
> -#define PCI_ERR_ROOT_SRC	54
> +#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
>  
>  /* Virtual Channel */
>  #define PCI_VC_PORT_REG1	4
> @@ -662,4 +694,22 @@
>  #define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
>  #define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
>  
> +#define PCI_LTR_MAX_SNOOP_LAT	0x4
> +#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
> +#define  PCI_LTR_VALUE_MASK	0x000003ff
> +#define  PCI_LTR_SCALE_MASK	0x00001c00
> +#define  PCI_LTR_SCALE_SHIFT	10
> +
> +/* Access Control Service */
> +#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
> +#define  PCI_ACS_SV		0x01	/* Source Validation */
> +#define  PCI_ACS_TB		0x02	/* Translation Blocking */
> +#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
> +#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
> +#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
> +#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
> +#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
> +#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
> +#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
> +
>  #endif /* LINUX_PCI_REGS_H */
> diff --git a/hw/pcie_aer.c b/hw/pcie_aer.c
> index f08d3c7..be019c7 100644
> --- a/hw/pcie_aer.c
> +++ b/hw/pcie_aer.c
> @@ -38,6 +38,9 @@
>  #define PCIE_DEV_PRINTF(dev, fmt, ...)                                  \
>      PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
>  
> +#define PCI_ERR_SRC_COR_OFFS    0
> +#define PCI_ERR_SRC_UNCOR_OFFS  2
> +
>  /* From 6.2.7 Error Listing and Rules. Table 6-2, 6-3 and 6-4 */
>  static uint32_t pcie_aer_uncor_default_severity(uint32_t status)
>  {
> @@ -320,7 +323,8 @@ static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
>          if (root_status & PCI_ERR_ROOT_COR_RCV) {
>              root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
>          } else {
> -            pci_set_word(aer_cap + PCI_ERR_ROOT_COR_SRC, msg->source_id);
> +            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC + PCI_ERR_SRC_COR_OFFS,
> +                         msg->source_id);
>          }
>          root_status |= PCI_ERR_ROOT_COR_RCV;
>          break;
> @@ -341,7 +345,8 @@ static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
>          if (root_status & PCI_ERR_ROOT_UNCOR_RCV) {
>              root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
>          } else {
> -            pci_set_word(aer_cap + PCI_ERR_ROOT_SRC, msg->source_id);
> +            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC +
> +                         PCI_ERR_SRC_UNCOR_OFFS, msg->source_id);
>          }
>          root_status |= PCI_ERR_ROOT_UNCOR_RCV;
>      }
> -- 
> 1.7.1

Patch

diff --git a/hw/pci_regs.h b/hw/pci_regs.h
index 5a5ab89..e884096 100644
--- a/hw/pci_regs.h
+++ b/hw/pci_regs.h
@@ -300,12 +300,22 @@ 
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
 #define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
 
-/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
+/* MSI-X registers */
 #define PCI_MSIX_FLAGS		2
 #define  PCI_MSIX_FLAGS_QSIZE	0x7FF
 #define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
 #define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
-#define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
+#define PCI_MSIX_TABLE		4
+#define PCI_MSIX_PBA		8
+#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
+
+/* MSI-X entry's format */
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
+#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
 
 /* CompactPCI Hotswap Register */
 
@@ -365,6 +375,11 @@ 
 #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
 #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
 
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
+
 /* PCI Express capability registers */
 
 #define PCI_EXP_FLAGS		2	/* Capabilities register */
@@ -420,7 +435,7 @@ 
 #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
 #define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
 #define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
-#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
 #define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
 #define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
 #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
@@ -437,7 +452,10 @@ 
 #define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
 #define PCI_EXP_LNKSTA		18	/* Link Status */
 #define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
+#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
 #define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
+#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
 #define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
 #define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
 #define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
@@ -486,10 +504,22 @@ 
 #define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
 #define PCI_EXP_RTCAP		30	/* Root Capabilities */
 #define PCI_EXP_RTSTA		32	/* Root Status */
+#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
 #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
 #define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
+#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
+#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
 #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
 #define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
+#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
+#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
+#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
+#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
 #define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 
@@ -502,9 +532,12 @@ 
 #define PCI_EXT_CAP_ID_VC	2
 #define PCI_EXT_CAP_ID_DSN	3
 #define PCI_EXT_CAP_ID_PWR	4
+#define PCI_EXT_CAP_ID_VNDR	11
+#define PCI_EXT_CAP_ID_ACS	13
 #define PCI_EXT_CAP_ID_ARI	14
 #define PCI_EXT_CAP_ID_ATS	15
 #define PCI_EXT_CAP_ID_SRIOV	16
+#define PCI_EXT_CAP_ID_LTR	24
 
 /* Advanced Error Reporting */
 #define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
@@ -556,8 +589,7 @@ 
 #define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
 #define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
 #define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
-#define PCI_ERR_ROOT_COR_SRC	52
-#define PCI_ERR_ROOT_SRC	54
+#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
 
 /* Virtual Channel */
 #define PCI_VC_PORT_REG1	4
@@ -662,4 +694,22 @@ 
 #define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
 #define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
 
+#define PCI_LTR_MAX_SNOOP_LAT	0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
+#define  PCI_LTR_VALUE_MASK	0x000003ff
+#define  PCI_LTR_SCALE_MASK	0x00001c00
+#define  PCI_LTR_SCALE_SHIFT	10
+
+/* Access Control Service */
+#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
+#define  PCI_ACS_SV		0x01	/* Source Validation */
+#define  PCI_ACS_TB		0x02	/* Translation Blocking */
+#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
+#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
+#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
+#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
+#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
+#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
+
 #endif /* LINUX_PCI_REGS_H */
diff --git a/hw/pcie_aer.c b/hw/pcie_aer.c
index f08d3c7..be019c7 100644
--- a/hw/pcie_aer.c
+++ b/hw/pcie_aer.c
@@ -38,6 +38,9 @@ 
 #define PCIE_DEV_PRINTF(dev, fmt, ...)                                  \
     PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
 
+#define PCI_ERR_SRC_COR_OFFS    0
+#define PCI_ERR_SRC_UNCOR_OFFS  2
+
 /* From 6.2.7 Error Listing and Rules. Table 6-2, 6-3 and 6-4 */
 static uint32_t pcie_aer_uncor_default_severity(uint32_t status)
 {
@@ -320,7 +323,8 @@  static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
         if (root_status & PCI_ERR_ROOT_COR_RCV) {
             root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
         } else {
-            pci_set_word(aer_cap + PCI_ERR_ROOT_COR_SRC, msg->source_id);
+            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC + PCI_ERR_SRC_COR_OFFS,
+                         msg->source_id);
         }
         root_status |= PCI_ERR_ROOT_COR_RCV;
         break;
@@ -341,7 +345,8 @@  static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg)
         if (root_status & PCI_ERR_ROOT_UNCOR_RCV) {
             root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
         } else {
-            pci_set_word(aer_cap + PCI_ERR_ROOT_SRC, msg->source_id);
+            pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC +
+                         PCI_ERR_SRC_UNCOR_OFFS, msg->source_id);
         }
         root_status |= PCI_ERR_ROOT_UNCOR_RCV;
     }