@@ -533,7 +533,8 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state);
extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
+extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
@@ -275,6 +275,19 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, ctrl);
+ udelay(10);
+ ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, ctrl);
+}
+
/**
* e1000_init_phy_params_pchlan - Initialize PHY function pointers
* @hw: pointer to the HW structure
@@ -284,7 +297,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 ctrl, fwsm;
+ u32 fwsm;
s32 ret_val = 0;
phy->addr = 1;
@@ -308,13 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
*/
fwsm = er32(FWSM);
if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
- ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, ctrl);
- udelay(10);
- ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, ctrl);
+ e1000_toggle_lanphypc_value_ich8lan(hw);
msleep(50);
/*
@@ -3586,17 +3593,16 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
}
/**
- * e1000e_disable_gig_wol_ich8lan - disable gig during WoL
+ * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
* @hw: pointer to the HW structure
*
* During S0 to Sx transition, it is possible the link remains at gig
* instead of negotiating to a lower speed. Before going to Sx, set
* 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
- * to a lower speed.
- *
- * Should only be called for applicable parts.
+ * to a lower speed. For PCH and newer parts, the OEM bits PHY register
+ * (LED, GbE disable and LPLU configurations) also needs to be written.
**/
-void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
{
u32 phy_ctrl;
s32 ret_val;
@@ -3616,6 +3622,60 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
}
/**
+ * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
+ * @hw: pointer to the HW structure
+ *
+ * During Sx to S0 transitions on non-managed devices or managed devices
+ * on which PHY resets are not blocked, if the PHY registers cannot be
+ * accessed properly by the s/w toggle the LANPHYPC value to power cycle
+ * the PHY.
+ **/
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ if (hw->mac.type != e1000_pch2lan)
+ return;
+
+ fwsm = er32(FWSM);
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) {
+ u16 phy_id1, phy_id2;
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to acquire PHY semaphore in resume\n");
+ return;
+ }
+
+ /* Test access to the PHY registers by reading the ID regs */
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
+ if (ret_val)
+ goto release;
+
+ if (hw->phy.id == ((u32)(phy_id1 << 16) |
+ (u32)(phy_id2 & PHY_REVISION_MASK)))
+ goto release;
+
+ e1000_toggle_lanphypc_value_ich8lan(hw);
+
+ hw->phy.ops.release(hw);
+ msleep(50);
+ e1000_phy_hw_reset(hw);
+ msleep(50);
+ return;
+ }
+
+release:
+ hw->phy.ops.release(hw);
+
+ return;
+}
+
+/**
* e1000_cleanup_led_ich8lan - Restore the default LED operation
* @hw: pointer to the HW structure
*
@@ -5278,7 +5278,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
if (adapter->flags & FLAG_IS_ICH)
- e1000e_disable_gig_wol_ich8lan(&adapter->hw);
+ e1000_suspend_workarounds_ich8lan(&adapter->hw);
/* Allow time for pending master requests to run */
e1000e_disable_pcie_master(&adapter->hw);
@@ -5429,6 +5429,9 @@ static int __e1000_resume(struct pci_dev *pdev)
return err;
}
+ if (hw->mac.type == e1000_pch2lan)
+ e1000_resume_workarounds_pchlan(&adapter->hw);
+
e1000e_power_up_phy(adapter);
/* report the system wakeup cause from S3/S4 */