From patchwork Wed Nov 7 18:20:08 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Brandt X-Patchwork-Id: 994413 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=renesas.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 42qvq41kF1z9sDT for ; Thu, 8 Nov 2018 05:20:32 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728459AbeKHDwF (ORCPT ); Wed, 7 Nov 2018 22:52:05 -0500 Received: from relmlor3.renesas.com ([210.160.252.173]:61757 "EHLO relmlie2.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727851AbeKHDwF (ORCPT ); Wed, 7 Nov 2018 22:52:05 -0500 Received: from unknown (HELO relmlir3.idc.renesas.com) ([10.200.68.153]) by relmlie2.idc.renesas.com with ESMTP; 08 Nov 2018 03:20:27 +0900 Received: from relmlii1.idc.renesas.com (relmlii1.idc.renesas.com [10.200.68.65]) by relmlir3.idc.renesas.com (Postfix) with ESMTP id DF96D50566; Thu, 8 Nov 2018 03:20:27 +0900 (JST) X-IronPort-AV: E=Sophos;i="5.54,476,1534777200"; d="scan'208";a="295395176" Received: from unknown (HELO rtamta01.rta.renesas.com) ([143.103.48.75]) by relmlii1.idc.renesas.com with ESMTP; 08 Nov 2018 03:20:26 +0900 Received: from ubuntu.localdomain (unknown [143.103.58.108]) by rtamta01.rta.renesas.com (Postfix) with ESMTP id 88F3213C; Wed, 7 Nov 2018 18:20:22 +0000 (UTC) From: Chris Brandt To: Linus Walleij , Rob Herring , Mark Rutland , Geert Uytterhoeven Cc: jacopo mondi , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Brandt Subject: [PATCH v3 1/2] pinctrl: Add RZ/A2 pin and gpio controller Date: Wed, 7 Nov 2018 13:20:08 -0500 Message-Id: <20181107182009.61718-2-chris.brandt@renesas.com> X-Mailer: git-send-email 2.16.1 In-Reply-To: <20181107182009.61718-1-chris.brandt@renesas.com> References: <20181107182009.61718-1-chris.brandt@renesas.com> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Adds support for the pin and gpio controller found in R7S9210 (RZ/A2) SoCs. Signed-off-by: Chris Brandt --- v3: - Changed names from Px to PORTx because "PC" is already defined v2: - fixed SOC part number in comments - sorted #includes - removed spaces in pfc_pin_port_name enum - put RZA2_NPORTS at the end of pfc_pin_port_name enum - added RZA2_ to the beginning of all #define macros - put ( ) around all passed arguments in #define macros - made helper macros to get register address easier - use defines for pin direction bit settings --- drivers/pinctrl/Kconfig | 11 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-rza2.c | 530 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 542 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-rza2.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 4d8c00eac742..3e4d890d4bd9 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -195,6 +195,17 @@ config PINCTRL_RZA1 help This selects pinctrl driver for Renesas RZ/A1 platforms. +config PINCTRL_RZA2 + bool "Renesas RZ/A2 gpio and pinctrl driver" + depends on OF + depends on ARCH_R7S9210 || COMPILE_TEST + select GPIOLIB + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + help + This selects pinctrl driver for Renesas RZ/A2 platforms. + config PINCTRL_RZN1 bool "Renesas RZ/N1 pinctrl driver" depends on OF diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 18a13c1e2c21..712184b74a5c 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o +obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/pinctrl-rza2.c new file mode 100644 index 000000000000..3781c3f693e8 --- /dev/null +++ b/drivers/pinctrl/pinctrl-rza2.c @@ -0,0 +1,530 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Combined GPIO and pin controller support for Renesas RZ/A2 (R7S9210) SoC + * + * Copyright (C) 2018 Chris Brandt + */ + +/* + * This pin controller/gpio combined driver supports Renesas devices of RZ/A2 + * family. + */ + +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinmux.h" + +#define DRIVER_NAME "pinctrl-rza2" + +#define RZA2_PINS_PER_PORT 8 +#define RZA2_NPINS (RZA2_PINS_PER_PORT * RZA2_NPORTS) +#define RZA2_PIN_ID_TO_PORT(id) ((id) / RZA2_PINS_PER_PORT) +#define RZA2_PIN_ID_TO_PIN(id) ((id) % RZA2_PINS_PER_PORT) + +/* + * Use 16 lower bits [15:0] for pin identifier + * Use 16 higher bits [31:16] for pin mux function + */ +#define MUX_PIN_ID_MASK GENMASK(15, 0) +#define MUX_FUNC_MASK GENMASK(31, 16) +#define MUX_FUNC_OFFS 16 +#define MUX_FUNC(pinconf) ((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS) + +enum pfc_pin_port_name {PORT0, PORT1, PORT2, PORT3, PORT4, PORT5, PORT6, PORT7, + PORT8, PORT9, PORTA, PORTB, PORTC, PORTD, PORTE, PORTF, + PORTG, PORTH, PORTJ, PORTK, PORTL, PORTM, RZA2_NPORTS}; +static const char port_names[] = "0123456789ABCDEFGHJKLM"; + +struct rza2_pinctrl_priv { + struct device *dev; + void __iomem *base; + + struct pinctrl_pin_desc *pins; + struct pinctrl_desc desc; + struct pinctrl_dev *pctl; +}; + +#define RZA2_PDR_BASE(_b) ((_b) + 0x0000) /* 16-bit, 2 bytes apart */ +#define RZA2_PODR_BASE(_b) ((_b) + 0x0040) /* 8-bit, 1 byte apart */ +#define RZA2_PIDR_BASE(_b) ((_b) + 0x0060) /* 8-bit, 1 byte apart */ +#define RZA2_PMR_BASE(_b) ((_b) + 0x0080) /* 8-bit, 1 byte apart */ +#define RZA2_DSCR_BASE(_b) ((_b) + 0x0140) /* 16-bit, 2 bytes apart */ +#define RZA2_PFS_BASE(_b) ((_b) + 0x0200) /* 8-bit, 8 bytes apart */ +#define RZA2_PWPR(_b) ((_b) + 0x02FF) /* 8-bit */ +#define RZA2_PFENET(_b) ((_b) + 0x0820) /* 8-bit */ +#define RZA2_PPOC(_b) ((_b) + 0x0900) /* 32-bit */ +#define RZA2_PHMOMO(_b) ((_b) + 0x0980) /* 32-bit */ +#define RZA2_PCKIO(_b) ((_b) + 0x09D0) /* 8-bit */ + +#define RZA2_PDR(_b, _port) (RZA2_PDR_BASE(_b) + ((_port) * 2)) +#define RZA2_PODR(_b, _port) (RZA2_PODR_BASE(_b) + (_port)) +#define RZA2_PIDR(_b, _port) (RZA2_PIDR_BASE(_b) + (_port)) +#define RZA2_PMR(_b, _port) (RZA2_PMR_BASE(_b) + (_port)) +#define RZA2_DSCR(_b, _port) (RZA2_DSCR_BASE(_b) + ((_port) * 2)) +#define RZA2_PFS(_b, _port, _pin) (RZA2_PFS_BASE(_b) + ((_port) * 8) \ + + (_pin)) +#define RZA2_PDR_HIGHZ 0x00 +#define RZA2_PDR_INPUT 0x02 +#define RZA2_PDR_OUTPUT 0x03 +#define RZA2_PDR_MASK 0x03 + +static void rza2_set_pin_function(void __iomem *pfc_base, u8 port, u8 pin, + u8 func) +{ + u8 reg8; + u16 reg16; + u16 mask16; + + /* Set pin to 'Non-use (Hi-z input protection)' */ + reg16 = readw(RZA2_PDR(pfc_base, port)); + mask16 = 0x03 << (pin * 2); + reg16 &= ~mask16; + writew(reg16, RZA2_PDR(pfc_base, port)); + + /* Temporarily switch to GPIO */ + reg8 = readb(RZA2_PMR(pfc_base, port)); + reg8 &= ~BIT(pin); + writeb(reg8, RZA2_PMR(pfc_base, port)); + + /* PFS Register Write Protect : OFF */ + writeb(0x00, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=0 */ + writeb(0x40, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=1 */ + + /* Set Pin function (interrupt disabled, ISEL=0) */ + writeb(func, RZA2_PFS(pfc_base, port, pin)); + + /* PFS Register Write Protect : ON */ + writeb(0x00, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=0 */ + writeb(0x80, RZA2_PWPR(pfc_base)); /* B0WI=1, PFSWE=0 */ + + /* Port Mode : Peripheral module pin functions */ + reg8 = readb(RZA2_PMR(pfc_base, port)); + reg8 |= BIT(pin); + writeb(reg8, RZA2_PMR(pfc_base, port)); +} + +static void rza2_pin_to_gpio(void __iomem *pfc_base, u8 port, u8 pin, u8 dir) +{ + u16 reg16; + u16 mask16; + + reg16 = readw(RZA2_PDR(pfc_base, port)); + mask16 = RZA2_PDR_MASK << (pin * 2); + reg16 &= ~mask16; + + if (dir == GPIOF_DIR_IN) + reg16 |= RZA2_PDR_INPUT << (pin * 2); /* pin as input */ + else + reg16 |= RZA2_PDR_OUTPUT << (pin * 2); /* pin as output */ + + writew(reg16, RZA2_PDR(pfc_base, port)); +} + +static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); + u8 port = offset / 8; + u8 pin = offset % 8; + u16 reg16; + + reg16 = readw(RZA2_PDR(priv->base, port)); + reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK; + + if (reg16 == RZA2_PDR_OUTPUT) + return GPIOF_DIR_OUT; + + if (reg16 == RZA2_PDR_INPUT) + return GPIOF_DIR_IN; + + /* + * This GPIO controller has a default Hi-Z state that is not input or + * output, so force the pin to input now. + */ + rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_IN); + + return GPIOF_DIR_IN; +} + +static int rza2_chip_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); + u8 port = offset / 8; + u8 pin = offset % 8; + + rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_IN); + + return 0; +} + +static int rza2_chip_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); + u8 port = offset / 8; + u8 pin = offset % 8; + + rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_OUT); + + return 0; +} + +static int rza2_chip_get(struct gpio_chip *chip, unsigned int offset) +{ + struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); + u8 port = offset / 8; + u8 pin = offset % 8; + + return (readb(RZA2_PIDR(priv->base, port)) >> pin) & 1; +} + +static void rza2_chip_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); + u8 port = offset / 8; + u8 pin = offset % 8; + u8 new_value = readb(RZA2_PODR(priv->base, port)); + + if (value) + new_value |= (1 << pin); + else + new_value &= ~(1 << pin); + + writeb(new_value, RZA2_PODR(priv->base, port)); +} + +static const char * const rza2_gpio_names[] = { + "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7", + "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7", + "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7", + "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7", + "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7", + "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7", + "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7", + "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7", + "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7", + "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7", + "PA_0", "PA_1", "PA_2", "PA_3", "PA_4", "PA_5", "PA_6", "PA_7", + "PB_0", "PB_1", "PB_2", "PB_3", "PB_4", "PB_5", "PB_6", "PB_7", + "PC_0", "PC_1", "PC_2", "PC_3", "PC_4", "PC_5", "PC_6", "PC_7", + "PD_0", "PD_1", "PD_2", "PD_3", "PD_4", "PD_5", "PD_6", "PD_7", + "PE_0", "PE_1", "PE_2", "PE_3", "PE_4", "PE_5", "PE_6", "PE_7", + "PF_0", "PF_1", "PF_2", "PF_3", "P0_4", "PF_5", "PF_6", "PF_7", + "PG_0", "PG_1", "PG_2", "P0_3", "PG_4", "PG_5", "PG_6", "PG_7", + "PH_0", "PH_1", "PH_2", "PH_3", "PH_4", "PH_5", "PH_6", "PH_7", + /* port I does not exist */ + "PJ_0", "PJ_1", "PJ_2", "PJ_3", "PJ_4", "PJ_5", "PJ_6", "PJ_7", + "PK_0", "PK_1", "PK_2", "PK_3", "PK_4", "PK_5", "PK_6", "PK_7", + "PL_0", "PL_1", "PL_2", "PL_3", "PL_4", "PL_5", "PL_6", "PL_7", + "PM_0", "PM_1", "PM_2", "PM_3", "PM_4", "PM_5", "PM_6", "PM_7", +}; + +static struct gpio_chip chip = { + .names = rza2_gpio_names, + .base = -1, + .ngpio = RZA2_NPINS, + .get_direction = rza2_chip_get_direction, + .direction_input = rza2_chip_direction_input, + .direction_output = rza2_chip_direction_output, + .get = rza2_chip_get, + .set = rza2_chip_set, +}; + +struct pinctrl_gpio_range gpio_range; + +static int rza2_gpio_register(struct rza2_pinctrl_priv *priv) +{ + struct device_node *np = priv->dev->of_node; + struct of_phandle_args of_args; + int ret; + + if (!of_property_read_bool(np, "gpio-controller")) { + dev_info(priv->dev, "No gpio controller registered\n"); + return 0; + } + + chip.label = devm_kasprintf(priv->dev, GFP_KERNEL, "%pOFn", np); + chip.of_node = np; + chip.parent = priv->dev; + + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, + &of_args); + if (ret) { + dev_err(priv->dev, "Unable to parse gpio-ranges\n"); + return ret; + } + + gpio_range.id = of_args.args[0]; + gpio_range.name = chip.label; + gpio_range.pin_base = gpio_range.base = of_args.args[1]; + gpio_range.npins = of_args.args[2]; + gpio_range.gc = &chip; + + /* Register our gpio chip with gpiolib */ + ret = devm_gpiochip_add_data(priv->dev, &chip, priv); + if (ret) + return ret; + + /* Register pin range with pinctrl core */ + pinctrl_add_gpio_range(priv->pctl, &gpio_range); + + dev_dbg(priv->dev, "Registered gpio controller\n"); + + return 0; +} + +static int rza2_pinctrl_register(struct rza2_pinctrl_priv *priv) +{ + struct pinctrl_pin_desc *pins; + unsigned int i; + int ret; + + pins = devm_kcalloc(priv->dev, RZA2_NPINS, sizeof(*pins), GFP_KERNEL); + if (!pins) + return -ENOMEM; + + priv->pins = pins; + priv->desc.pins = pins; + priv->desc.npins = RZA2_NPINS; + + for (i = 0; i < RZA2_NPINS; i++) { + unsigned int pin = RZA2_PIN_ID_TO_PIN(i); + unsigned int port = RZA2_PIN_ID_TO_PORT(i); + + pins[i].number = i; + pins[i].name = devm_kasprintf(priv->dev, GFP_KERNEL, "P%c_%u", + port_names[port], pin); + } + + ret = devm_pinctrl_register_and_init(priv->dev, &priv->desc, priv, + &priv->pctl); + if (ret) { + dev_err(priv->dev, "pinctrl registration failed\n"); + return ret; + } + + ret = pinctrl_enable(priv->pctl); + if (ret) { + dev_err(priv->dev, "pinctrl enable failed\n"); + return ret; + } + + ret = rza2_gpio_register(priv); + if (ret) { + dev_err(priv->dev, "GPIO registration failed\n"); + return ret; + } + + return 0; +} + +/* + * For each DT node, create a single pin mapping. That pin mapping will only + * contain a single group of pins, and that group of pins will only have a + * single function that can be selected. + */ +static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev); + struct property *of_pins; + int i; + unsigned int *pins; + unsigned int *psel_val; + const char **pin_fn; + int ret, npins; + int gsel, fsel; + + /* Find out how many pins to map */ + of_pins = of_find_property(np, "pinmux", NULL); + if (!of_pins) { + dev_info(priv->dev, "Missing pinmux property\n"); + return -ENOENT; + } + npins = of_pins->length / sizeof(u32); + + pins = devm_kcalloc(priv->dev, npins, sizeof(*pins), GFP_KERNEL); + psel_val = devm_kcalloc(priv->dev, npins, sizeof(*psel_val), + GFP_KERNEL); + pin_fn = devm_kzalloc(priv->dev, sizeof(*pin_fn), GFP_KERNEL); + if (!pins || !psel_val || !pin_fn) + return -ENOMEM; + + /* Collect pin locations and mux settings from DT properties */ + for (i = 0; i < npins; ++i) { + u32 value; + + ret = of_property_read_u32_index(np, "pinmux", i, &value); + if (ret) + return ret; + pins[i] = value & MUX_PIN_ID_MASK; + psel_val[i] = MUX_FUNC(value); + } + + /* Register a single pin group listing all the pins we read from DT */ + gsel = pinctrl_generic_add_group(pctldev, np->name, pins, npins, NULL); + if (gsel < 0) + return gsel; + + /* + * Register a single group function where the 'data' is an array PSEL + * register values read from DT. + */ + pin_fn[0] = np->name; + fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1, + psel_val); + if (fsel < 0) { + ret = fsel; + goto remove_group; + } + + dev_dbg(priv->dev, "Parsed %s with %d pins\n", np->name, npins); + + /* Create map where to retrieve function and mux settings from */ + *num_maps = 0; + *map = kzalloc(sizeof(**map), GFP_KERNEL); + if (!*map) { + ret = -ENOMEM; + goto remove_function; + } + + (*map)->type = PIN_MAP_TYPE_MUX_GROUP; + (*map)->data.mux.group = np->name; + (*map)->data.mux.function = np->name; + *num_maps = 1; + + return 0; + +remove_function: + pinmux_generic_remove_function(pctldev, fsel); + +remove_group: + pinctrl_generic_remove_group(pctldev, gsel); + + dev_info(priv->dev, "Unable to parse DT node %s\n", np->name); + + return ret; +} + +static void rza2_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned int num_maps) +{ + kfree(map); +} + +static const struct pinctrl_ops rza2_pinctrl_ops = { + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, + .dt_node_to_map = rza2_dt_node_to_map, + .dt_free_map = rza2_dt_free_map, +}; + +static int rza2_set_mux(struct pinctrl_dev *pctldev, unsigned int selector, + unsigned int group) +{ + struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev); + struct function_desc *func; + struct group_desc *grp; + int i; + unsigned int *psel_val; + + grp = pinctrl_generic_get_group(pctldev, group); + if (!grp) + return -EINVAL; + + func = pinmux_generic_get_function(pctldev, selector); + if (!func) + return -EINVAL; + + psel_val = func->data; + + for (i = 0; i < grp->num_pins; ++i) { + dev_dbg(priv->dev, "Setting P%c_%d to PSEL=%d\n", + port_names[RZA2_PIN_ID_TO_PORT(grp->pins[i])], + RZA2_PIN_ID_TO_PIN(grp->pins[i]), + psel_val[i]); + rza2_set_pin_function( + priv->base, + RZA2_PIN_ID_TO_PORT(grp->pins[i]), + RZA2_PIN_ID_TO_PIN(grp->pins[i]), + psel_val[i]); + } + + return 0; +} + +static const struct pinmux_ops rza2_pinmux_ops = { + .get_functions_count = pinmux_generic_get_function_count, + .get_function_name = pinmux_generic_get_function_name, + .get_function_groups = pinmux_generic_get_function_groups, + .set_mux = rza2_set_mux, + .strict = true, +}; + +static int rza2_pinctrl_probe(struct platform_device *pdev) +{ + struct rza2_pinctrl_priv *priv; + struct resource *res; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + platform_set_drvdata(pdev, priv); + + priv->desc.name = DRIVER_NAME; + priv->desc.pctlops = &rza2_pinctrl_ops; + priv->desc.pmxops = &rza2_pinmux_ops; + priv->desc.owner = THIS_MODULE; + + ret = rza2_pinctrl_register(priv); + if (ret) + return ret; + + pr_info("RZ/A2 pin controller registered\n"); + + return 0; +} + +static const struct of_device_id rza2_pinctrl_of_match[] = { + { + .compatible = "renesas,r7s9210-pinctrl", + }, + { /* sentinel */ } +}; + +static struct platform_driver rza2_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = rza2_pinctrl_of_match, + }, + .probe = rza2_pinctrl_probe, +}; + +static int __init rza2_pinctrl_init(void) +{ + return platform_driver_register(&rza2_pinctrl_driver); +} +core_initcall(rza2_pinctrl_init); + + +MODULE_AUTHOR("Chris Brandt "); +MODULE_DESCRIPTION("Pin and gpio controller driver for RZ/A2 SoC"); +MODULE_LICENSE("GPL v2");