| Message ID | 20181107174844.5381-4-manivannan.sadhasivam@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add initial pinctrl support for MT6797 SoC | expand |
On Wed, Nov 7, 2018 at 6:49 PM Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote: > Add pinmux support for UART1 on MediatekX20 Development board based > on Mediatek MT6797 SoC. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On 07/11/2018 18:48, Manivannan Sadhasivam wrote: > Add pinmux support for UART1 on MediatekX20 Development board based > on Mediatek MT6797 SoC. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 2 ++ > arch/arm64/boot/dts/mediatek/mt6797.dtsi | 7 +++++++ > 2 files changed, 9 insertions(+) > pushed to v4.20-next/dts64 Thanks! > diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts > index 742938a1a548..13939d55b85b 100644 > --- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts > +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts > @@ -30,4 +30,6 @@ > > &uart1 { > status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins_a>; > }; > diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi > index 231230d32d09..a64bb84bdec3 100644 > --- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi > @@ -141,6 +141,13 @@ > "iocfgr", "iocfgt"; > gpio-controller; > #gpio-cells = <2>; > + > + uart1_pins_a: uart1 { > + pins1 { > + pinmux = <MT6797_GPIO232__FUNC_URXD1>, > + <MT6797_GPIO233__FUNC_UTXD1>; > + }; > + }; > }; > > scpsys: scpsys@10006000 { >
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts index 742938a1a548..13939d55b85b 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts @@ -30,4 +30,6 @@ &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi index 231230d32d09..a64bb84bdec3 100644 --- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi @@ -141,6 +141,13 @@ "iocfgr", "iocfgt"; gpio-controller; #gpio-cells = <2>; + + uart1_pins_a: uart1 { + pins1 { + pinmux = <MT6797_GPIO232__FUNC_URXD1>, + <MT6797_GPIO233__FUNC_UTXD1>; + }; + }; }; scpsys: scpsys@10006000 {
Add pinmux support for UART1 on MediatekX20 Development board based on Mediatek MT6797 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 2 ++ arch/arm64/boot/dts/mediatek/mt6797.dtsi | 7 +++++++ 2 files changed, 9 insertions(+)