[21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller

Message ID 20181106131807.29951-22-Zhiqiang.Hou@nxp.com
State New
Delegated to: Lorenzo Pieralisi
Headers show
Series
  • PCI: refactor the Mobiveil driver and add PCIe support for NXP LX SoCs
Related show

Commit Message

Z.q. Hou Nov. 6, 2018, 1:21 p.m.
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Add PCIe controller DT bindings of NXP LX series SoCs.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
 .../devicetree/bindings/pci/lx-pci.txt        | 52 +++++++++++++++++++
 MAINTAINERS                                   |  8 +++
 2 files changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/lx-pci.txt

Comments

Leo Li Nov. 8, 2018, 9:29 p.m. | #1
> -----Original Message-----
> From: Z.q. Hou
> Sent: Tuesday, November 6, 2018 7:21 AM
> To: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
> <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com
> Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller
> 
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> 
> Add PCIe controller DT bindings of NXP LX series SoCs.

I'm not sure if this is a good idea to name this controller LX PCIe controller.  Right now, it could be true that it is only used on LX series SoCs.  But I'm not sure if the LS series will not use this controller or LX series will only use this controller in the future.

Since the LX series is still using the layerscape branding, so probably we should keep using the layerscape-pci.txt and define the PCIe Gen4 variant?

Same comment for other places using the LX naming in this driver.

> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> ---
>  .../devicetree/bindings/pci/lx-pci.txt        | 52 +++++++++++++++++++
>  MAINTAINERS                                   |  8 +++
>  2 files changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/lx-pci.txt
> 
> diff --git a/Documentation/devicetree/bindings/pci/lx-pci.txt
> b/Documentation/devicetree/bindings/pci/lx-pci.txt
> new file mode 100644
> index 000000000000..dc602fef93b0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/lx-pci.txt
> @@ -0,0 +1,52 @@
> +NXP LX PCIe controller
> +
> +This PCIe controller is based on the Mobiveil PCIe IP and thus inherits
> +all the common properties defined in mobiveil-pcie.txt.
> +
> +Required properties:
> +- compatible: should contain the platform identifier such as:
> +  "fsl,lx2160a-pcie"
> +- reg: base addresses and lengths of the PCIe controller register blocks.
> +  "config_axi_slave": PCIe controller registers
> +  "csr_axi_slave": Bridge config registers
> +- interrupts: A list of interrupt outputs of the controller. Must
> +contain an
> +  entry for each entry in the interrupt-names property.
> +- interrupt-names: It could include the following entries:
> +  "intr": The interrupt that is asserted for controller interrupts
> +  "aer": Asserted for aer interrupt when chip support the aer interrupt with
> +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> aer.
> +  "pme": Asserted for pme interrupt when chip support the pme interrupt
> with
> +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> pme.
> +- dma-coherent: Indicates that the hardware IP block can ensure the
> +coherency
> +  of the data transferred from/to the IP block. This can avoid the
> +software
> +  cache flush/invalid actions, and improve the performance significantly.
> +- msi-parent : See the generic MSI binding described in
> +  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> +
> +Example:
> +
> +	pcie@3400000 {
> +		compatible = "fsl,lx2160a-pcie";
> +		reg = <0x00 0x03400000 0x0 0x00100000   /* controller
> registers */
> +		       0x80 0x00000000 0x0 0x00001000>; /* configuration
> space */
> +		reg-names = "csr_axi_slave", "config_axi_slave";
> +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> +		interrupt-names = "aer", "pme", "intr";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		device_type = "pci";
> +		apio-wins = <8>;
> +		ppio-wins = <8>;
> +		dma-coherent;
> +		bus-range = <0x0 0xff>;
> +		msi-parent = <&its>;
> +		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> 0x40000000>;
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0000 0 0 1 &gic GIC_SPI 109
> IRQ_TYPE_LEVEL_HIGH>,
> +				<0000 0 0 2 &gic GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>,
> +				<0000 0 0 3 &gic GIC_SPI 111
> IRQ_TYPE_LEVEL_HIGH>,
> +				<0000 0 0 4 &gic GIC_SPI 112
> IRQ_TYPE_LEVEL_HIGH>;
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0c57ccff3188..7da555c8e2f5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11252,6 +11252,14 @@ L:	linux-arm-kernel@lists.infradead.org
>  S:	Maintained
>  F:	drivers/pci/controller/dwc/*layerscape*
> 
> +PCI DRIVER FOR NXP LX
> +M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> +L:	linux-pci@vger.kernel.org
> +L:	linux-arm-kernel@lists.infradead.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/pci/lx-pci.txt
> +F:	drivers/pci/controller/mobibeil/pci-lx.c
> +
>  PCI DRIVER FOR GENERIC OF HOSTS
>  M:	Will Deacon <will.deacon@arm.com>
>  L:	linux-pci@vger.kernel.org
> --
> 2.17.1
Z.q. Hou Nov. 12, 2018, 1:48 a.m. | #2
Hi Leo,

Thanks a lot for your comments!

> -----Original Message-----
> From: Leo Li
> Sent: 2018年11月9日 5:29
> To: Z.q. Hou <zhiqiang.hou@nxp.com>; linux-pci@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; bhelgaas@google.com; robh+dt@kernel.org;
> mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> shawnguo@kernel.org; lorenzo.pieralisi@arm.com
> Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller
> 
> 
> 
> > -----Original Message-----
> > From: Z.q. Hou
> > Sent: Tuesday, November 6, 2018 7:21 AM
> > To: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
> > <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com
> > Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> > <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>; Z.q.
> Hou
> > <zhiqiang.hou@nxp.com>
> > Subject: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe
> > controller
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > Add PCIe controller DT bindings of NXP LX series SoCs.
> 
> I'm not sure if this is a good idea to name this controller LX PCIe controller.
> Right now, it could be true that it is only used on LX series SoCs.  But I'm not
> sure if the LS series will not use this controller or LX series will only use this
> controller in the future.
> 
> Since the LX series is still using the layerscape branding, so probably we
> should keep using the layerscape-pci.txt and define the PCIe Gen4 variant?

Yes, will add the new PCIe IP bindings to Layerscape-pci.txt.

> 
> Same comment for other places using the LX naming in this driver.

Do you have any suggestion about how to name the driver and prefix of structures in the driver?

> 
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > ---
> >  .../devicetree/bindings/pci/lx-pci.txt        | 52
> +++++++++++++++++++
> >  MAINTAINERS                                   |  8 +++
> >  2 files changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/lx-pci.txt
> >
> > diff --git a/Documentation/devicetree/bindings/pci/lx-pci.txt
> > b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > new file mode 100644
> > index 000000000000..dc602fef93b0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > @@ -0,0 +1,52 @@
> > +NXP LX PCIe controller
> > +
> > +This PCIe controller is based on the Mobiveil PCIe IP and thus
> > +inherits all the common properties defined in mobiveil-pcie.txt.
> > +
> > +Required properties:
> > +- compatible: should contain the platform identifier such as:
> > +  "fsl,lx2160a-pcie"
> > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > +  "config_axi_slave": PCIe controller registers
> > +  "csr_axi_slave": Bridge config registers
> > +- interrupts: A list of interrupt outputs of the controller. Must
> > +contain an
> > +  entry for each entry in the interrupt-names property.
> > +- interrupt-names: It could include the following entries:
> > +  "intr": The interrupt that is asserted for controller interrupts
> > +  "aer": Asserted for aer interrupt when chip support the aer interrupt
> with
> > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > aer.
> > +  "pme": Asserted for pme interrupt when chip support the pme
> > + interrupt
> > with
> > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > pme.
> > +- dma-coherent: Indicates that the hardware IP block can ensure the
> > +coherency
> > +  of the data transferred from/to the IP block. This can avoid the
> > +software
> > +  cache flush/invalid actions, and improve the performance significantly.
> > +- msi-parent : See the generic MSI binding described in
> > +  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> > +
> > +Example:
> > +
> > +	pcie@3400000 {
> > +		compatible = "fsl,lx2160a-pcie";
> > +		reg = <0x00 0x03400000 0x0 0x00100000   /* controller
> > registers */
> > +		       0x80 0x00000000 0x0 0x00001000>; /* configuration
> > space */
> > +		reg-names = "csr_axi_slave", "config_axi_slave";
> > +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> > interrupt */
> > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> > interrupt */
> > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> > controller interrupt */
> > +		interrupt-names = "aer", "pme", "intr";
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		device_type = "pci";
> > +		apio-wins = <8>;
> > +		ppio-wins = <8>;
> > +		dma-coherent;
> > +		bus-range = <0x0 0xff>;
> > +		msi-parent = <&its>;
> > +		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> > 0x40000000>;
> > +		#interrupt-cells = <1>;
> > +		interrupt-map-mask = <0 0 0 7>;
> > +		interrupt-map = <0000 0 0 1 &gic GIC_SPI 109
> > IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 2 &gic GIC_SPI 110
> > IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 3 &gic GIC_SPI 111
> > IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 4 &gic GIC_SPI 112
> > IRQ_TYPE_LEVEL_HIGH>;
> > +	};
> > diff --git a/MAINTAINERS b/MAINTAINERS index
> > 0c57ccff3188..7da555c8e2f5 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11252,6 +11252,14 @@ L:	linux-arm-kernel@lists.infradead.org
> >  S:	Maintained
> >  F:	drivers/pci/controller/dwc/*layerscape*
> >
> > +PCI DRIVER FOR NXP LX
> > +M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > +L:	linux-pci@vger.kernel.org
> > +L:	linux-arm-kernel@lists.infradead.org
> > +S:	Maintained
> > +F:	Documentation/devicetree/bindings/pci/lx-pci.txt
> > +F:	drivers/pci/controller/mobibeil/pci-lx.c
> > +
> >  PCI DRIVER FOR GENERIC OF HOSTS
> >  M:	Will Deacon <will.deacon@arm.com>
> >  L:	linux-pci@vger.kernel.org
> > --
> > 2.17.1
Thanks,
Zhiqiang
Leo Li Nov. 14, 2018, 6:51 p.m. | #3
> -----Original Message-----
> From: Z.q. Hou
> Sent: Sunday, November 11, 2018 5:48 PM
> To: Leo Li <leoyang.li@nxp.com>; linux-pci@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; bhelgaas@google.com; robh+dt@kernel.org;
> mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> shawnguo@kernel.org; lorenzo.pieralisi@arm.com
> Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller
> 
> Hi Leo,
> 
> Thanks a lot for your comments!
> 
> > -----Original Message-----
> > From: Leo Li
> > Sent: 2018年11月9日 5:29
> > To: Z.q. Hou <zhiqiang.hou@nxp.com>; linux-pci@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; bhelgaas@google.com; robh+dt@kernel.org;
> > mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> > shawnguo@kernel.org; lorenzo.pieralisi@arm.com
> > Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> > <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> > Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe
> > controller
> >
> >
> >
> > > -----Original Message-----
> > > From: Z.q. Hou
> > > Sent: Tuesday, November 6, 2018 7:21 AM
> > > To: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > > l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
> > > <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com
> > > Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> > > <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>; Z.q.
> > Hou
> > > <zhiqiang.hou@nxp.com>
> > > Subject: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe
> > > controller
> > >
> > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > >
> > > Add PCIe controller DT bindings of NXP LX series SoCs.
> >
> > I'm not sure if this is a good idea to name this controller LX PCIe controller.
> > Right now, it could be true that it is only used on LX series SoCs.
> > But I'm not sure if the LS series will not use this controller or LX
> > series will only use this controller in the future.
> >
> > Since the LX series is still using the layerscape branding, so
> > probably we should keep using the layerscape-pci.txt and define the PCIe
> Gen4 variant?
> 
> Yes, will add the new PCIe IP bindings to Layerscape-pci.txt.
> 
> >
> > Same comment for other places using the LX naming in this driver.
> 
> Do you have any suggestion about how to name the driver and prefix of
> structures in the driver?

Probably something like pcie-layerscape-gen4?

> 
> >
> > >
> > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > > ---
> > >  .../devicetree/bindings/pci/lx-pci.txt        | 52
> > +++++++++++++++++++
> > >  MAINTAINERS                                   |  8 +++
> > >  2 files changed, 60 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/pci/lx-pci.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > new file mode 100644
> > > index 000000000000..dc602fef93b0
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > @@ -0,0 +1,52 @@
> > > +NXP LX PCIe controller
> > > +
> > > +This PCIe controller is based on the Mobiveil PCIe IP and thus
> > > +inherits all the common properties defined in mobiveil-pcie.txt.
> > > +
> > > +Required properties:
> > > +- compatible: should contain the platform identifier such as:
> > > +  "fsl,lx2160a-pcie"
> > > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > > +  "config_axi_slave": PCIe controller registers
> > > +  "csr_axi_slave": Bridge config registers
> > > +- interrupts: A list of interrupt outputs of the controller. Must
> > > +contain an
> > > +  entry for each entry in the interrupt-names property.
> > > +- interrupt-names: It could include the following entries:
> > > +  "intr": The interrupt that is asserted for controller interrupts
> > > +  "aer": Asserted for aer interrupt when chip support the aer
> > > +interrupt
> > with
> > > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > > aer.
> > > +  "pme": Asserted for pme interrupt when chip support the pme
> > > + interrupt
> > > with
> > > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > > pme.
> > > +- dma-coherent: Indicates that the hardware IP block can ensure the
> > > +coherency
> > > +  of the data transferred from/to the IP block. This can avoid the
> > > +software
> > > +  cache flush/invalid actions, and improve the performance significantly.
> > > +- msi-parent : See the generic MSI binding described in
> > > +  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> > > +
> > > +Example:
> > > +
> > > +	pcie@3400000 {
> > > +		compatible = "fsl,lx2160a-pcie";
> > > +		reg = <0x00 0x03400000 0x0 0x00100000   /* controller
> > > registers */
> > > +		       0x80 0x00000000 0x0 0x00001000>; /* configuration
> > > space */
> > > +		reg-names = "csr_axi_slave", "config_axi_slave";
> > > +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> > > interrupt */
> > > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> > > interrupt */
> > > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> > > controller interrupt */
> > > +		interrupt-names = "aer", "pme", "intr";
> > > +		#address-cells = <3>;
> > > +		#size-cells = <2>;
> > > +		device_type = "pci";
> > > +		apio-wins = <8>;
> > > +		ppio-wins = <8>;
> > > +		dma-coherent;
> > > +		bus-range = <0x0 0xff>;
> > > +		msi-parent = <&its>;
> > > +		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> > > 0x40000000>;
> > > +		#interrupt-cells = <1>;
> > > +		interrupt-map-mask = <0 0 0 7>;
> > > +		interrupt-map = <0000 0 0 1 &gic GIC_SPI 109
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 2 &gic GIC_SPI 110
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 3 &gic GIC_SPI 111
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 4 &gic GIC_SPI 112
> > > IRQ_TYPE_LEVEL_HIGH>;
> > > +	};
> > > diff --git a/MAINTAINERS b/MAINTAINERS index
> > > 0c57ccff3188..7da555c8e2f5 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -11252,6 +11252,14 @@ L:	linux-arm-kernel@lists.infradead.org
> > >  S:	Maintained
> > >  F:	drivers/pci/controller/dwc/*layerscape*
> > >
> > > +PCI DRIVER FOR NXP LX
> > > +M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > > +L:	linux-pci@vger.kernel.org
> > > +L:	linux-arm-kernel@lists.infradead.org
> > > +S:	Maintained
> > > +F:	Documentation/devicetree/bindings/pci/lx-pci.txt
> > > +F:	drivers/pci/controller/mobibeil/pci-lx.c
> > > +
> > >  PCI DRIVER FOR GENERIC OF HOSTS
> > >  M:	Will Deacon <will.deacon@arm.com>
> > >  L:	linux-pci@vger.kernel.org
> > > --
> > > 2.17.1
> Thanks,
> Zhiqiang

Patch

diff --git a/Documentation/devicetree/bindings/pci/lx-pci.txt b/Documentation/devicetree/bindings/pci/lx-pci.txt
new file mode 100644
index 000000000000..dc602fef93b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/lx-pci.txt
@@ -0,0 +1,52 @@ 
+NXP LX PCIe controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+  "config_axi_slave": PCIe controller registers
+  "csr_axi_slave": Bridge config registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
+		 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
+		 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+		reg-names = "csr_axi_slave", "config_axi_slave";
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "aer", "pme", "intr";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		apio-wins = <8>;
+		ppio-wins = <8>;
+		dma-coherent;
+		bus-range = <0x0 0xff>;
+		msi-parent = <&its>;
+		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 0c57ccff3188..7da555c8e2f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11252,6 +11252,14 @@  L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
 F:	drivers/pci/controller/dwc/*layerscape*
 
+PCI DRIVER FOR NXP LX
+M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/lx-pci.txt
+F:	drivers/pci/controller/mobibeil/pci-lx.c
+
 PCI DRIVER FOR GENERIC OF HOSTS
 M:	Will Deacon <will.deacon@arm.com>
 L:	linux-pci@vger.kernel.org