Message ID | 6c7264d5a9368635b00099f4e295b69a86e96ffa.1307467823.git.u-boot@lakedaemon.net |
---|---|
State | Superseded |
Headers | show |
> -----Original Message----- > From: u-boot@lakedaemon.net [mailto:u-boot@lakedaemon.net] > Sent: Tuesday, June 07, 2011 11:07 PM > To: u-boot@lists.denx.de > Cc: Prafulla Wadaskar; Siddarth Gore; Jason Cooper > Subject: [PATCH 1/1] dreamplug: Initial support. > > From: Jason Cooper <u-boot@lakedaemon.net> > > Copied files from boards/Marvell/guruplug/ and did > s/GURUPLUG/DREAMPLUG/g > s/guruplug/dreamplug/g > > Switched from NAND flash to SPI flash. > MPP._SPI_ configuration copied from > boards/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c > > Also, MACH_TYPE_DREAMPLUG (board id 3550) has been registered at > http://www.arm.linux.co.uk/developer/machines/, once support has > been added to mainline Linux, we'll update the board id here. > For now, we use MACH_TYPE_GURUPLUG, just as the factory U-Boot does. > > Signed-off-by: Jason Cooper <u-boot@lakedaemon.net> > --- > MAINTAINERS | 1 + > MAKEALL | 1 + > board/Marvell/dreamplug/Makefile | 51 +++++++++++ > board/Marvell/dreamplug/dreamplug.c | 154 > ++++++++++++++++++++++++++++++++ > board/Marvell/dreamplug/dreamplug.h | 39 ++++++++ > board/Marvell/dreamplug/kwbimage.cfg | 160 > ++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/dreamplug.h | 111 +++++++++++++++++++++++ > 8 files changed, 518 insertions(+), 0 deletions(-) > create mode 100644 board/Marvell/dreamplug/Makefile > create mode 100644 board/Marvell/dreamplug/dreamplug.c > create mode 100644 board/Marvell/dreamplug/dreamplug.h > create mode 100644 board/Marvell/dreamplug/kwbimage.cfg > create mode 100644 include/configs/dreamplug.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index c462ae2..c3711a8 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -202,6 +202,7 @@ Niklaus Giger <niklaus.giger@netstal.com> > Siddarth Gore <gores@marvell.com> > > guruplug ARM926EJS (Kirkwood SoC) > + dreamplug ARM926EJS (Kirkwood SoC) Dreamplug entry should be under your name. maintain alphabetical order too. > > Paul Gortmaker <paul.gortmaker@windriver.com> > > diff --git a/MAKEALL b/MAKEALL > index d592374..35fc5b7 100755 > --- a/MAKEALL > +++ b/MAKEALL > @@ -345,6 +345,7 @@ LIST_ARM9=" \ > edb9315a \ > edminiv2 \ > guruplug \ > + dreamplug \ Not in order. > imx27lite \ > jadecpu \ > lpd7a400 \ > diff --git a/board/Marvell/dreamplug/Makefile > b/board/Marvell/dreamplug/Makefile > new file mode 100644 > index 0000000..b7e5270 > --- /dev/null > +++ b/board/Marvell/dreamplug/Makefile > @@ -0,0 +1,51 @@ > +# > +# (C) Copyright 2009 2011 ?? and everywhere > +# Marvell Semiconductor <www.marvell.com> > +# Written-by: Siddarth Gore <gores@marvell.com> You can say, based on or referenced from.. You as an author should reflect for the new files being added. > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > +# MA 02110-1301 USA > +# > + > +include $(TOPDIR)/config.mk > + > +LIB = $(obj)lib$(BOARD).o > + > +COBJS := dreamplug.o > + > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > +OBJS := $(addprefix $(obj),$(COBJS)) > +SOBJS := $(addprefix $(obj),$(SOBJS)) > + > +$(LIB): $(obj).depend $(OBJS) $(SOBJS) > + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > + > +clean: > + rm -f $(SOBJS) $(OBJS) > + > +distclean: clean > + rm -f $(LIB) core *.bak .depend > + > +####################################################################### > ## > + > +# defines $(obj).depend target > +include $(SRCTREE)/rules.mk > + > +sinclude $(obj).depend > + > +####################################################################### > ## > diff --git a/board/Marvell/dreamplug/dreamplug.c > b/board/Marvell/dreamplug/dreamplug.c > new file mode 100644 > index 0000000..3797af1 > --- /dev/null > +++ b/board/Marvell/dreamplug/dreamplug.c > @@ -0,0 +1,154 @@ > +/* > + * (C) Copyright 2009 > + * Marvell Semiconductor <www.marvell.com> > + * Written-by: Siddarth Gore <gores@marvell.com> Same here.. > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > + * MA 02110-1301 USA > + */ > + > +#include <common.h> > +#include <miiphy.h> > +#include <asm/arch/kirkwood.h> > +#include <asm/arch/mpp.h> > +#include "dreamplug.h" > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int board_early_init_f(void) > +{ > + /* > + * default gpio configuration > + * There are maximum 64 gpios controlled through 2 sets of registers > + * the below configuration configures mainly initial LED status > + */ > + kw_config_gpio(DREAMPLUG_OE_VAL_LOW, > + DREAMPLUG_OE_VAL_HIGH, > + DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH); > + > + /* Multi-Purpose Pins Functionality configuration */ > + u32 kwmpp_config[] = { > + MPP0_SPI_SCn, > + MPP1_SPI_MOSI, > + MPP2_SPI_SCK, > + MPP3_SPI_MISO, > + MPP4_GPIO, > + MPP5_GPO, > + MPP6_SYSRST_OUTn, > + MPP7_SPI_SCn, > + MPP8_TW_SDA, > + MPP9_TW_SCK, > + MPP10_UART0_TXD, > + MPP11_UART0_RXD, > + MPP12_SD_CLK, > + MPP13_SD_CMD, > + MPP14_SD_D0, > + MPP15_SD_D1, > + MPP16_SD_D2, > + MPP17_SD_D3, > + MPP18_GPO, > + MPP19_GPO, > + MPP20_GE1_0, > + MPP21_GE1_1, > + MPP22_GE1_2, > + MPP23_GE1_3, > + MPP24_GE1_4, > + MPP25_GE1_5, > + MPP26_GE1_6, > + MPP27_GE1_7, > + MPP28_GE1_8, > + MPP29_GE1_9, > + MPP30_GE1_10, > + MPP31_GE1_11, > + MPP32_GE1_12, > + MPP33_GE1_13, > + MPP34_GE1_14, > + MPP35_GE1_15, > + MPP36_GPIO, > + MPP37_GPIO, > + MPP38_GPIO, > + MPP39_GPIO, > + MPP40_TDM_SPI_SCK, > + MPP41_TDM_SPI_MISO, > + MPP42_TDM_SPI_MOSI, > + MPP43_GPIO, > + MPP44_GPIO, > + MPP45_GPIO, > + MPP46_GPIO, /* M_RLED */ > + MPP47_GPIO, /* M_GLED */ > + MPP48_GPIO, /* B_RLED */ > + MPP49_GPIO, /* B_GLED */ Similar comments for all above configurations will be helpful > + 0 > + }; > + kirkwood_mpp_conf(kwmpp_config); > + return 0; > +} > + > +int board_init(void) > +{ > + /* > + * arch number of board > + * XXX: change to MACH_TYPE_DREAMPLUG once in Linux mainline. > + */ > + gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG; This need to be changed, you have to wait and post patch once machine ID/arch no for this board reflects in mach-types.h > + > + /* adress of boot parameters */ > + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; > + > + return 0; > +} > + > +#ifdef CONFIG_RESET_PHY_R > +void mv_phy_88e1121_init(char *name) > +{ > + u16 reg; > + u16 devadr; > + > + if (miiphy_set_current_dev(name)) > + return; > + > + /* command to read PHY dev address */ > + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { > + printf("Err..%s could not read PHY dev address\n", > + __FUNCTION__); > + return; > + } > + > + /* > + * Enable RGMII delay on Tx and Rx for CPU port > + * Ref: sec 4.7.2 of chip datasheet > + */ > + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 2); > + miiphy_read(name, devadr, MV88E1121_MAC_CTRL2_REG, ®); > + reg |= (MV88E1121_RGMII_RXTM_CTRL | MV88E1121_RGMII_TXTM_CTRL); > + miiphy_write(name, devadr, MV88E1121_MAC_CTRL2_REG, reg); > + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 0); > + > + /* reset the phy */ > + miiphy_reset(name, devadr); > + > + printf("88E1121 Initialized on %s\n", name); > +} > + > +void reset_phy(void) > +{ > + /* configure and initialize both PHY's */ > + mv_phy_88e1121_init("egiga0"); > + mv_phy_88e1121_init("egiga1"); > +} > +#endif /* CONFIG_RESET_PHY_R */ > diff --git a/board/Marvell/dreamplug/dreamplug.h > b/board/Marvell/dreamplug/dreamplug.h > new file mode 100644 > index 0000000..b597859 > --- /dev/null > +++ b/board/Marvell/dreamplug/dreamplug.h > @@ -0,0 +1,39 @@ > +/* > + * (C) Copyright 2009 > + * Marvell Semiconductor <www.marvell.com> > + * Written-by: Siddarth Gore <gores@marvell.com> > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > + * MA 02110-1301 USA > + */ > + > +#ifndef __DREAMPLUG_H > +#define __DREAMPLUG_H > + > +#define DREAMPLUG_OE_LOW (~(0)) > +#define DREAMPLUG_OE_HIGH (~(0)) > +#define DREAMPLUG_OE_VAL_LOW 0 > +#define DREAMPLUG_OE_VAL_HIGH (0xf << 16) /* 4 LED Pins high */ > + > +/* PHY related */ > +#define MV88E1121_MAC_CTRL2_REG 21 > +#define MV88E1121_PGADR_REG 22 > +#define MV88E1121_RGMII_TXTM_CTRL (1 << 4) > +#define MV88E1121_RGMII_RXTM_CTRL (1 << 5) > + > +#endif /* __DREAMPLUG_H */ > diff --git a/board/Marvell/dreamplug/kwbimage.cfg Is this file pure copy paste from any reference from mainlined code? If yes, then you can avoid this file and reuse the referred one. Pls clarify > b/board/Marvell/dreamplug/kwbimage.cfg > new file mode 100644 > index 0000000..ae76b32 > --- /dev/null ...snip... > diff --git a/boards.cfg b/boards.cfg > index d2cacc8..a69ada6 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -110,6 +110,7 @@ suen3 arm arm926ejs > km_arm keymile > suen8 arm arm926ejs km_arm > keymile kirkwood > mgcoge3un arm arm926ejs km_arm > keymile kirkwood > guruplug arm arm926ejs - > Marvell kirkwood > +dreamplug arm arm926ejs - > Marvell Kirkwood Please maintain order Regards.. Prafulla.. .
On Wed, Jun 08, 2011 at 12:51:01AM -0700, Prafulla Wadaskar wrote: > > > > -----Original Message----- > > From: u-boot@lakedaemon.net [mailto:u-boot@lakedaemon.net] > > Sent: Tuesday, June 07, 2011 11:07 PM > > To: u-boot@lists.denx.de > > Cc: Prafulla Wadaskar; Siddarth Gore; Jason Cooper > > Subject: [PATCH 1/1] dreamplug: Initial support. > > > > From: Jason Cooper <u-boot@lakedaemon.net> > > > > Copied files from boards/Marvell/guruplug/ and did > > s/GURUPLUG/DREAMPLUG/g > > s/guruplug/dreamplug/g > > > > Switched from NAND flash to SPI flash. > > MPP._SPI_ configuration copied from > > boards/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c > > Prafulla, Please note: I literally copied the files from boards/Marvell/guruplug, and then copied the SPI config from the mv88f6281gtw_ge... There isn't a single original thought of mine in there. ;-) > > Also, MACH_TYPE_DREAMPLUG (board id 3550) has been registered at > > http://www.arm.linux.co.uk/developer/machines/, once support has > > been added to mainline Linux, we'll update the board id here. > > For now, we use MACH_TYPE_GURUPLUG, just as the factory U-Boot does. > > > > Signed-off-by: Jason Cooper <u-boot@lakedaemon.net> > > --- > > MAINTAINERS | 1 + > > MAKEALL | 1 + > > board/Marvell/dreamplug/Makefile | 51 +++++++++++ > > board/Marvell/dreamplug/dreamplug.c | 154 > > ++++++++++++++++++++++++++++++++ > > board/Marvell/dreamplug/dreamplug.h | 39 ++++++++ > > board/Marvell/dreamplug/kwbimage.cfg | 160 > > ++++++++++++++++++++++++++++++++++ > > boards.cfg | 1 + > > include/configs/dreamplug.h | 111 +++++++++++++++++++++++ > > 8 files changed, 518 insertions(+), 0 deletions(-) > > create mode 100644 board/Marvell/dreamplug/Makefile > > create mode 100644 board/Marvell/dreamplug/dreamplug.c > > create mode 100644 board/Marvell/dreamplug/dreamplug.h > > create mode 100644 board/Marvell/dreamplug/kwbimage.cfg > > create mode 100644 include/configs/dreamplug.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index c462ae2..c3711a8 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -202,6 +202,7 @@ Niklaus Giger <niklaus.giger@netstal.com> > > Siddarth Gore <gores@marvell.com> > > > > guruplug ARM926EJS (Kirkwood SoC) > > + dreamplug ARM926EJS (Kirkwood SoC) > > Dreamplug entry should be under your name. maintain alphabetical order too. > Ok, I assumed I didn't have enough experience yet. No problem. > > > > Paul Gortmaker <paul.gortmaker@windriver.com> > > > > diff --git a/MAKEALL b/MAKEALL > > index d592374..35fc5b7 100755 > > --- a/MAKEALL > > +++ b/MAKEALL > > @@ -345,6 +345,7 @@ LIST_ARM9=" \ > > edb9315a \ > > edminiv2 \ > > guruplug \ > > + dreamplug \ > > Not in order. > Ok. > > imx27lite \ > > jadecpu \ > > lpd7a400 \ > > diff --git a/board/Marvell/dreamplug/Makefile > > b/board/Marvell/dreamplug/Makefile > > new file mode 100644 > > index 0000000..b7e5270 > > --- /dev/null > > +++ b/board/Marvell/dreamplug/Makefile > > @@ -0,0 +1,51 @@ > > +# > > +# (C) Copyright 2009 > > 2011 ?? and everywhere > This probably needs to be fixed throughout the boards/Marvell/* codebase. Can I do that since I'm not Marvell? If so, I'll do a separate patch. > > +# Marvell Semiconductor <www.marvell.com> > > +# Written-by: Siddarth Gore <gores@marvell.com> > > You can say, based on or referenced from.. > You as an author should reflect for the new files being added. > Will do, but see my above comment about no original thoughts. ;-) > > +# > > +# See file CREDITS for list of people who contributed to this > > +# project. > > +# > > +# This program is free software; you can redistribute it and/or > > +# modify it under the terms of the GNU General Public License as > > +# published by the Free Software Foundation; either version 2 of > > +# the License, or (at your option) any later version. > > +# > > +# This program is distributed in the hope that it will be useful, > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +# GNU General Public License for more details. > > +# > > +# You should have received a copy of the GNU General Public License > > +# along with this program; if not, write to the Free Software > > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > > +# MA 02110-1301 USA > > +# > > + > > +include $(TOPDIR)/config.mk > > + > > +LIB = $(obj)lib$(BOARD).o > > + > > +COBJS := dreamplug.o > > + > > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > > +OBJS := $(addprefix $(obj),$(COBJS)) > > +SOBJS := $(addprefix $(obj),$(SOBJS)) > > + > > +$(LIB): $(obj).depend $(OBJS) $(SOBJS) > > + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > > + > > +clean: > > + rm -f $(SOBJS) $(OBJS) > > + > > +distclean: clean > > + rm -f $(LIB) core *.bak .depend > > + > > +####################################################################### > > ## > > + > > +# defines $(obj).depend target > > +include $(SRCTREE)/rules.mk > > + > > +sinclude $(obj).depend > > + > > +####################################################################### > > ## > > diff --git a/board/Marvell/dreamplug/dreamplug.c > > b/board/Marvell/dreamplug/dreamplug.c > > new file mode 100644 > > index 0000000..3797af1 > > --- /dev/null > > +++ b/board/Marvell/dreamplug/dreamplug.c > > @@ -0,0 +1,154 @@ > > +/* > > + * (C) Copyright 2009 > > + * Marvell Semiconductor <www.marvell.com> > > + * Written-by: Siddarth Gore <gores@marvell.com> > > Same here.. > Ok. > > + * > > + * See file CREDITS for list of people who contributed to this > > + * project. > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of > > + * the License, or (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > > + * MA 02110-1301 USA > > + */ > > + > > +#include <common.h> > > +#include <miiphy.h> > > +#include <asm/arch/kirkwood.h> > > +#include <asm/arch/mpp.h> > > +#include "dreamplug.h" > > + > > +DECLARE_GLOBAL_DATA_PTR; > > + > > +int board_early_init_f(void) > > +{ > > + /* > > + * default gpio configuration > > + * There are maximum 64 gpios controlled through 2 sets of registers > > + * the below configuration configures mainly initial LED status > > + */ > > + kw_config_gpio(DREAMPLUG_OE_VAL_LOW, > > + DREAMPLUG_OE_VAL_HIGH, > > + DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH); > > + > > + /* Multi-Purpose Pins Functionality configuration */ > > + u32 kwmpp_config[] = { > > + MPP0_SPI_SCn, > > + MPP1_SPI_MOSI, > > + MPP2_SPI_SCK, > > + MPP3_SPI_MISO, > > + MPP4_GPIO, > > + MPP5_GPO, > > + MPP6_SYSRST_OUTn, > > + MPP7_SPI_SCn, > > + MPP8_TW_SDA, > > + MPP9_TW_SCK, > > + MPP10_UART0_TXD, > > + MPP11_UART0_RXD, > > + MPP12_SD_CLK, > > + MPP13_SD_CMD, > > + MPP14_SD_D0, > > + MPP15_SD_D1, > > + MPP16_SD_D2, > > + MPP17_SD_D3, > > + MPP18_GPO, > > + MPP19_GPO, > > + MPP20_GE1_0, > > + MPP21_GE1_1, > > + MPP22_GE1_2, > > + MPP23_GE1_3, > > + MPP24_GE1_4, > > + MPP25_GE1_5, > > + MPP26_GE1_6, > > + MPP27_GE1_7, > > + MPP28_GE1_8, > > + MPP29_GE1_9, > > + MPP30_GE1_10, > > + MPP31_GE1_11, > > + MPP32_GE1_12, > > + MPP33_GE1_13, > > + MPP34_GE1_14, > > + MPP35_GE1_15, > > + MPP36_GPIO, > > + MPP37_GPIO, > > + MPP38_GPIO, > > + MPP39_GPIO, > > + MPP40_TDM_SPI_SCK, > > + MPP41_TDM_SPI_MISO, > > + MPP42_TDM_SPI_MOSI, > > + MPP43_GPIO, > > + MPP44_GPIO, > > + MPP45_GPIO, > > + MPP46_GPIO, /* M_RLED */ > > + MPP47_GPIO, /* M_GLED */ > > + MPP48_GPIO, /* B_RLED */ > > + MPP49_GPIO, /* B_GLED */ > > Similar comments for all above configurations will be helpful > I'll have to do some research, with the exception of the SPI pins, this is verbatim what guruplug has. Perhaps a second pre-patch is in order to go with the Copyright update? > > + 0 > > + }; > > + kirkwood_mpp_conf(kwmpp_config); > > + return 0; > > +} > > + > > +int board_init(void) > > +{ > > + /* > > + * arch number of board > > + * XXX: change to MACH_TYPE_DREAMPLUG once in Linux mainline. > > + */ > > + gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG; > > This need to be changed, you have to wait and post patch once machine > ID/arch no for this board reflects in mach-types.h > Ok. I'm working on the Linux patch series now. I'll continue to label future versions of this series as RFC until mach-types is updated. > > + > > + /* adress of boot parameters */ > > + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_RESET_PHY_R > > +void mv_phy_88e1121_init(char *name) > > +{ > > + u16 reg; > > + u16 devadr; > > + > > + if (miiphy_set_current_dev(name)) > > + return; > > + > > + /* command to read PHY dev address */ > > + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { > > + printf("Err..%s could not read PHY dev address\n", > > + __FUNCTION__); > > + return; > > + } > > + > > + /* > > + * Enable RGMII delay on Tx and Rx for CPU port > > + * Ref: sec 4.7.2 of chip datasheet > > + */ > > + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 2); > > + miiphy_read(name, devadr, MV88E1121_MAC_CTRL2_REG, ®); > > + reg |= (MV88E1121_RGMII_RXTM_CTRL | MV88E1121_RGMII_TXTM_CTRL); > > + miiphy_write(name, devadr, MV88E1121_MAC_CTRL2_REG, reg); > > + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 0); > > + > > + /* reset the phy */ > > + miiphy_reset(name, devadr); > > + > > + printf("88E1121 Initialized on %s\n", name); > > +} > > + > > +void reset_phy(void) > > +{ > > + /* configure and initialize both PHY's */ > > + mv_phy_88e1121_init("egiga0"); > > + mv_phy_88e1121_init("egiga1"); > > +} > > +#endif /* CONFIG_RESET_PHY_R */ > > diff --git a/board/Marvell/dreamplug/dreamplug.h > > b/board/Marvell/dreamplug/dreamplug.h > > new file mode 100644 > > index 0000000..b597859 > > --- /dev/null > > +++ b/board/Marvell/dreamplug/dreamplug.h > > @@ -0,0 +1,39 @@ > > +/* > > + * (C) Copyright 2009 > > + * Marvell Semiconductor <www.marvell.com> > > + * Written-by: Siddarth Gore <gores@marvell.com> > > + * > > + * See file CREDITS for list of people who contributed to this > > + * project. > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of > > + * the License, or (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > > + * MA 02110-1301 USA > > + */ > > + > > +#ifndef __DREAMPLUG_H > > +#define __DREAMPLUG_H > > + > > +#define DREAMPLUG_OE_LOW (~(0)) > > +#define DREAMPLUG_OE_HIGH (~(0)) > > +#define DREAMPLUG_OE_VAL_LOW 0 > > +#define DREAMPLUG_OE_VAL_HIGH (0xf << 16) /* 4 LED Pins high */ > > + > > +/* PHY related */ > > +#define MV88E1121_MAC_CTRL2_REG 21 > > +#define MV88E1121_PGADR_REG 22 > > +#define MV88E1121_RGMII_TXTM_CTRL (1 << 4) > > +#define MV88E1121_RGMII_RXTM_CTRL (1 << 5) > > + > > +#endif /* __DREAMPLUG_H */ > > diff --git a/board/Marvell/dreamplug/kwbimage.cfg > > Is this file pure copy paste from any reference from mainlined code? > If yes, then you can avoid this file and reuse the referred one. > Pls clarify > It's copied from boards/Marvell/guruplug/kwbimage.cfg, then: /^BOOT_FROM/ s/nand/spi/ I'll look into #include (or equivalent) the original file and making the one change. > > b/board/Marvell/dreamplug/kwbimage.cfg > > new file mode 100644 > > index 0000000..ae76b32 > > --- /dev/null > ...snip... > > > diff --git a/boards.cfg b/boards.cfg > > index d2cacc8..a69ada6 100644 > > --- a/boards.cfg > > +++ b/boards.cfg > > @@ -110,6 +110,7 @@ suen3 arm arm926ejs > > km_arm keymile > > suen8 arm arm926ejs km_arm > > keymile kirkwood > > mgcoge3un arm arm926ejs km_arm > > keymile kirkwood > > guruplug arm arm926ejs - > > Marvell kirkwood > > +dreamplug arm arm926ejs - > > Marvell Kirkwood > > Please maintain order > Ok. > Regards.. > Prafulla.. . Thanks again for all the help! Jason.
> -----Original Message----- > From: Jason [mailto:u-boot@lakedaemon.net] > Sent: Wednesday, June 08, 2011 8:38 PM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Siddarth Gore; Ashish Karkare; Prabhanjan > Sarnaik > Subject: Re: [PATCH 1/1] dreamplug: Initial support. > > On Wed, Jun 08, 2011 at 12:51:01AM -0700, Prafulla Wadaskar wrote: > > > > > > > -----Original Message----- > > > From: u-boot@lakedaemon.net [mailto:u-boot@lakedaemon.net] > > > Sent: Tuesday, June 07, 2011 11:07 PM > > > To: u-boot@lists.denx.de > > > Cc: Prafulla Wadaskar; Siddarth Gore; Jason Cooper > > > Subject: [PATCH 1/1] dreamplug: Initial support. > > > > > > From: Jason Cooper <u-boot@lakedaemon.net> > > > > > > Copied files from boards/Marvell/guruplug/ and did > > > s/GURUPLUG/DREAMPLUG/g > > > s/guruplug/dreamplug/g > > > > > > Switched from NAND flash to SPI flash. > > > MPP._SPI_ configuration copied from > > > boards/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c > > > > > Prafulla, > ...snip.. > > > diff --git a/board/Marvell/dreamplug/Makefile > > > b/board/Marvell/dreamplug/Makefile > > > new file mode 100644 > > > index 0000000..b7e5270 > > > --- /dev/null > > > +++ b/board/Marvell/dreamplug/Makefile > > > @@ -0,0 +1,51 @@ > > > +# > > > +# (C) Copyright 2009 > > > > 2011 ?? and everywhere > > > > This probably needs to be fixed throughout the boards/Marvell/* > codebase. Can I do that since I'm not Marvell? If so, I'll do a > separate patch. Anyone can contribute for the u-boot project. In this case, not really, just think of file that you are adding newly, and correct the same in next patch post version. > > > > +# Marvell Semiconductor <www.marvell.com> > > > +# Written-by: Siddarth Gore <gores@marvell.com> > > > > You can say, based on or referenced from.. > > You as an author should reflect for the new files being added. > > > > Will do, but see my above comment about no original thoughts. ;-) Just take care of code that you are adding. Regards.. Prafulla . .
diff --git a/MAINTAINERS b/MAINTAINERS index c462ae2..c3711a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -202,6 +202,7 @@ Niklaus Giger <niklaus.giger@netstal.com> Siddarth Gore <gores@marvell.com> guruplug ARM926EJS (Kirkwood SoC) + dreamplug ARM926EJS (Kirkwood SoC) Paul Gortmaker <paul.gortmaker@windriver.com> diff --git a/MAKEALL b/MAKEALL index d592374..35fc5b7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -345,6 +345,7 @@ LIST_ARM9=" \ edb9315a \ edminiv2 \ guruplug \ + dreamplug \ imx27lite \ jadecpu \ lpd7a400 \ diff --git a/board/Marvell/dreamplug/Makefile b/board/Marvell/dreamplug/Makefile new file mode 100644 index 0000000..b7e5270 --- /dev/null +++ b/board/Marvell/dreamplug/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Siddarth Gore <gores@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := dreamplug.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c new file mode 100644 index 0000000..3797af1 --- /dev/null +++ b/board/Marvell/dreamplug/dreamplug.c @@ -0,0 +1,154 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include "dreamplug.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(DREAMPLUG_OE_VAL_LOW, + DREAMPLUG_OE_VAL_HIGH, + DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + u32 kwmpp_config[] = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_GPIO, + MPP5_GPO, + MPP6_SYSRST_OUTn, + MPP7_SPI_SCn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_GPO, + MPP19_GPO, + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GE1_14, + MPP35_GE1_15, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_TDM_SPI_SCK, + MPP41_TDM_SPI_MISO, + MPP42_TDM_SPI_MOSI, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 + }; + kirkwood_mpp_conf(kwmpp_config); + return 0; +} + +int board_init(void) +{ + /* + * arch number of board + * XXX: change to MACH_TYPE_DREAMPLUG once in Linux mainline. + */ + gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void mv_phy_88e1121_init(char *name) +{ + u16 reg; + u16 devadr; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __FUNCTION__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1121_MAC_CTRL2_REG, ®); + reg |= (MV88E1121_RGMII_RXTM_CTRL | MV88E1121_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1121_MAC_CTRL2_REG, reg); + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1121 Initialized on %s\n", name); +} + +void reset_phy(void) +{ + /* configure and initialize both PHY's */ + mv_phy_88e1121_init("egiga0"); + mv_phy_88e1121_init("egiga1"); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/dreamplug/dreamplug.h b/board/Marvell/dreamplug/dreamplug.h new file mode 100644 index 0000000..b597859 --- /dev/null +++ b/board/Marvell/dreamplug/dreamplug.h @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __DREAMPLUG_H +#define __DREAMPLUG_H + +#define DREAMPLUG_OE_LOW (~(0)) +#define DREAMPLUG_OE_HIGH (~(0)) +#define DREAMPLUG_OE_VAL_LOW 0 +#define DREAMPLUG_OE_VAL_HIGH (0xf << 16) /* 4 LED Pins high */ + +/* PHY related */ +#define MV88E1121_MAC_CTRL2_REG 21 +#define MV88E1121_PGADR_REG 22 +#define MV88E1121_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1121_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __DREAMPLUG_H */ diff --git a/board/Marvell/dreamplug/kwbimage.cfg b/board/Marvell/dreamplug/kwbimage.cfg new file mode 100644 index 0000000..ae76b32 --- /dev/null +++ b/board/Marvell/dreamplug/kwbimage.cfg @@ -0,0 +1,160 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Siddarth Gore <gores@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0/1 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b9b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x37543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x000000cc # DDR Address Control +# bit1-0: 01, Cs0width=x8 +# bit3-2: 10, Cs0size=1Gb +# bit5-4: 01, Cs1width=x8 +# bit7-6: 10, Cs1size=1Gb +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000C52 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x0F, Size (i.e. 256MB) + +DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E803 # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/boards.cfg b/boards.cfg index d2cacc8..a69ada6 100644 --- a/boards.cfg +++ b/boards.cfg @@ -110,6 +110,7 @@ suen3 arm arm926ejs km_arm keymile suen8 arm arm926ejs km_arm keymile kirkwood mgcoge3un arm arm926ejs km_arm keymile kirkwood guruplug arm arm926ejs - Marvell kirkwood +dreamplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE openrd_client arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_CLIENT diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h new file mode 100644 index 0000000..bf477b2 --- /dev/null +++ b/include/configs/dreamplug.h @@ -0,0 +1,111 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_DREAMPLUG_H +#define _CONFIG_DREAMPLUG_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_DREAMPLUG /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT +#define CONFIG_CMD_SF +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ + "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ + "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "bootm 0x6400000;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "x_bootcmd_ethernet=ping 192.168.2.1\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ + "x_bootargs=console=ttyS0,115200\0" \ + "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +#define CONFIG_SYS_ALT_MEMTEST + +#endif /* _CONFIG_DREAMPLUG_H */