[6/9] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu

Message ID 20181026111638.10759-7-thierry.reding@gmail.com
State Superseded
Headers show
  • serial: Add Tegra Combined UART driver
Related show

Commit Message

Thierry Reding Oct. 26, 2018, 11:16 a.m.
From: Mikko Perttunen <mperttunen@nvidia.com>

Add bindings for the Tegra Combined UART device used to talk to the
UART console on Tegra194 systems.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 .../bindings/serial/nvidia,tegra194-tcu.txt   | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt


diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
new file mode 100644
index 000000000000..a8becf6efd2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
@@ -0,0 +1,35 @@ 
+NVIDIA Tegra Combined UART (TCU)
+The TCU is a system for sharing a hardware UART instance among multiple
+systems within the Tegra SoC. It is implemented through a mailbox-
+based protocol where each "virtual UART" has a pair of mailboxes, one
+for transmitting and one for receiving, that is used to communicate
+with the hardware implementing the TCU.
+Required properties:
+- name : Should be tcu
+- compatible
+    Array of strings
+    One of:
+    - "nvidia,tegra194-tcu"
+- mbox-names:
+    "rx" - Mailbox for receiving data from hardware UART
+    "tx" - Mailbox for transmitting data to hardware UART
+- mboxes: Mailboxes corresponding to the mbox-names. 
+This node is a mailbox consumer. See the following files for details of
+the mailbox subsystem, and the specifiers implemented by the relevant
+- .../mailbox/mailbox.txt
+- .../mailbox/nvidia,tegra186-hsp.txt
+Example bindings:
+tcu: tcu {
+	compatible = "nvidia,tegra194-tcu";
+	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+	         <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+	mbox-names = "rx", "tx";