diff mbox series

[PULL,17/28] pci-testdev: add optional memory bar

Message ID 20181023234112.188140-18-mst@redhat.com
State New
Headers show
Series [PULL,01/28] virtio-blk: fix comment for virtio_blk_rw_complete | expand

Commit Message

Michael S. Tsirkin Oct. 23, 2018, 11:41 p.m. UTC 
From: Gerd Hoffmann <kraxel@redhat.com>

Add memory bar to pci-testdev.  Size is configurable using the membar
property.  Setting the size to zero (default) turns it off.  Can be used
to check whether guests handle large pci bars correctly.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 docs/specs/pci-testdev.txt | 15 ++++++++++-----
 hw/misc/pci-testdev.c      | 19 +++++++++++++++++++
 2 files changed, 29 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/docs/specs/pci-testdev.txt b/docs/specs/pci-testdev.txt
index 128ae222ef..4280a1e73c 100644
--- a/docs/specs/pci-testdev.txt
+++ b/docs/specs/pci-testdev.txt
@@ -1,11 +1,11 @@ 
 pci-test is a device used for testing low level IO
 
-device implements up to two BARs: BAR0 and BAR1.
-Each BAR can be memory or IO. Guests must detect
-BAR type and act accordingly.
+device implements up to three BARs: BAR0, BAR1 and BAR2.
+Each of BAR 0+1 can be memory or IO. Guests must detect
+BAR types and act accordingly.
 
-Each BAR size is up to 4K bytes.
-Each BAR starts with the following header:
+BAR 0+1 size is up to 4K bytes each.
+BAR 0+1 starts with the following header:
 
 typedef struct PCITestDevHdr {
     uint8_t test;  <- write-only, starts a given test number
@@ -24,3 +24,8 @@  All registers are little endian.
 device is expected to always implement tests 0 to N on each BAR, and to add new
 tests with higher numbers.  In this way a guest can scan test numbers until it
 detects an access type that it does not support on this BAR, then stop.
+
+BAR2 is a 64bit memory bar, without backing storage.  It is disabled
+by default and can be enabled using the membar=<size> property.  This
+can be used to test whether guests handle pci bars of a specific
+(possibly quite large) size correctly.
diff --git a/hw/misc/pci-testdev.c b/hw/misc/pci-testdev.c
index 32041f535f..a811b2ce20 100644
--- a/hw/misc/pci-testdev.c
+++ b/hw/misc/pci-testdev.c
@@ -85,6 +85,9 @@  typedef struct PCITestDevState {
     MemoryRegion portio;
     IOTest *tests;
     int current;
+
+    size_t membar_size;
+    MemoryRegion membar;
 } PCITestDevState;
 
 #define TYPE_PCI_TEST_DEV "pci-testdev"
@@ -253,6 +256,16 @@  static void pci_testdev_realize(PCIDevice *pci_dev, Error **errp)
     pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &d->mmio);
     pci_register_bar(pci_dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->portio);
 
+    if (d->membar_size) {
+        memory_region_init(&d->membar, OBJECT(d), "pci-testdev-membar",
+                           d->membar_size);
+        pci_register_bar(pci_dev, 2,
+                         PCI_BASE_ADDRESS_SPACE_MEMORY |
+                         PCI_BASE_ADDRESS_MEM_PREFETCH |
+                         PCI_BASE_ADDRESS_MEM_TYPE_64,
+                         &d->membar);
+    }
+
     d->current = -1;
     d->tests = g_malloc0(IOTEST_MAX * sizeof *d->tests);
     for (i = 0; i < IOTEST_MAX; ++i) {
@@ -305,6 +318,11 @@  static void qdev_pci_testdev_reset(DeviceState *dev)
     pci_testdev_reset(d);
 }
 
+static Property pci_testdev_properties[] = {
+    DEFINE_PROP_SIZE("membar", PCITestDevState, membar_size, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void pci_testdev_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -319,6 +337,7 @@  static void pci_testdev_class_init(ObjectClass *klass, void *data)
     dc->desc = "PCI Test Device";
     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
     dc->reset = qdev_pci_testdev_reset;
+    dc->props = pci_testdev_properties;
 }
 
 static const TypeInfo pci_testdev_info = {