diff mbox series

[U-Boot] configs: am3517_evm: Use default OMAP3 memory settings

Message ID 20181021153449.2385-1-aford173@gmail.com
State Accepted
Commit 9a2cff744b803b186a1336ac8067bb372af9e688
Delegated to: Tom Rini
Headers show
Series [U-Boot] configs: am3517_evm: Use default OMAP3 memory settings | expand

Commit Message

Adam Ford Oct. 21, 2018, 3:34 p.m. UTC 
The AM3517 is mostly am omap3, so this partch removes the custom
memory configurations and just uses the default common entries
for omap3 and armv7.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Tom Rini Nov. 17, 2018, 1:32 p.m. UTC | #1 
On Sun, Oct 21, 2018 at 10:34:49AM -0500, Adam Ford wrote:

> The AM3517 is mostly am omap3, so this partch removes the custom
> memory configurations and just uses the default common entries
> for omap3 and armv7.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
> index 0463e42048..4e7e5209d4 100644

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0463e42048..4e7e5209d4 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -12,16 +12,6 @@ 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-
 #include <configs/ti_omap3_common.h>
 
 #undef CONFIG_DM_I2C_COMPAT
@@ -176,8 +166,6 @@ 
 
 /* Physical Memory Map */
 #define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
 
 /* FLASH and environment organization */
 
@@ -203,10 +191,6 @@ 
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE		0x40200000
 
-#undef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"