diff mbox

mtd: nand: remove unnecessary TODO

Message ID 1307039906-6462-1-git-send-email-computersforpeace@gmail.com
State Accepted
Commit 5507766b639e53b9230484588eba8b4e18d0563b
Headers show

Commit Message

Brian Norris June 2, 2011, 6:38 p.m. UTC 
I believe this TODO was unnecessary back when it was introduced:
	commit d1e1f4e42b5df063712ca2926e50c07b95c96b96
	mtd: nand: add support for reading ONFI parameters...

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/mtd/nand/nand_base.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

Comments

Artem Bityutskiy June 6, 2011, 8:56 a.m. UTC | #1 
On Thu, 2011-06-02 at 11:38 -0700, Brian Norris wrote:
> I believe this TODO was unnecessary back when it was introduced:
> 	commit d1e1f4e42b5df063712ca2926e50c07b95c96b96
> 	mtd: nand: add support for reading ONFI parameters...
> 
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Pushed  to l2-mtd-2.6.git, thanks.
diff mbox

Patch

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a46e9bb..7781988 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3151,7 +3151,6 @@  ident_done:
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
 		chip->cmdfunc = nand_command_lp;
 
-	/* TODO onfi flash name */
 	printk(KERN_INFO "NAND device: Manufacturer ID:"
 		" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
 		nand_manuf_ids[maf_idx].name,