Patchwork [U-Boot,5/5] scsi/ahci: add support for non-PCI controllers

login
register
mail settings
Submitter Rob Herring
Date June 1, 2011, 7:10 p.m.
Message ID <1306955427-18940-6-git-send-email-robherring2@gmail.com>
Download mbox | patch
Permalink /patch/98245/
State Changes Requested
Headers show

Comments

Rob Herring - June 1, 2011, 7:10 p.m.
From: Rob Herring <rob.herring@calxeda.com>

Add support for AHCI controllers that are not PCI based.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
 common/cmd_scsi.c    |    6 +++-
 drivers/block/ahci.c |   62 +++++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 60 insertions(+), 8 deletions(-)
Wolfgang Denk - June 1, 2011, 7:31 p.m.
Dear Rob Herring,

In message <1306955427-18940-6-git-send-email-robherring2@gmail.com> you wrote:
> From: Rob Herring <rob.herring@calxeda.com>
> 
> Add support for AHCI controllers that are not PCI based.


...
> +	memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);

This triggers a checkpatch error.

Why don;t you simply write:

	memset((void *)ataid, 0, sizeof(ataid)):

?

> +      err_out:

labels should not be indented


Best regards,

Wolfgang Denk

Patch

diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index be4fe74..25a8299 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -47,7 +47,8 @@ 
 #define SCSI_DEV_ID  0x5288
 
 #else
-#error no scsi device defined
+#define SCSI_VEND_ID 0
+#define SCSI_DEV_ID  0
 #endif
 
 
@@ -174,7 +175,7 @@  removable:
 		scsi_curr_dev = -1;
 }
 
-
+#ifdef CONFIG_PCI
 void scsi_init(void)
 {
 	int busdevfunc;
@@ -192,6 +193,7 @@  void scsi_init(void)
 	scsi_low_level_init(busdevfunc);
 	scsi_scan(1);
 }
+#endif
 
 block_dev_desc_t * scsi_get_dev(int dev)
 {
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index d431c5a..3a69fef 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -78,7 +78,9 @@  static int waiting_for_cmd_completed(volatile u8 *offset,
 
 static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 {
+#ifdef CONFIG_PCI
 	pci_dev_t pdev = probe_ent->dev;
+#endif
 	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
 	u32 tmp, cap_save;
 	u16 tmp16;
@@ -110,6 +112,7 @@  static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 	writel(cap_save, mmio + HOST_CAP);
 	writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
 
+#ifdef CONFIG_PCI
 	pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
 
 	if (vendor == PCI_VENDOR_ID_INTEL) {
@@ -118,7 +121,7 @@  static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 		tmp16 |= 0xf;
 		pci_write_config_word(pdev, 0x92, tmp16);
 	}
-
+#endif
 	probe_ent->cap = readl(mmio + HOST_CAP);
 	probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
 	probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
@@ -183,11 +186,11 @@  static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
 	tmp = readl(mmio + HOST_CTL);
 	debug("HOST_CTL 0x%x\n", tmp);
-
+#ifdef CONFIG_PCI
 	pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
 	tmp |= PCI_COMMAND_MASTER;
 	pci_write_config_word(pdev, PCI_COMMAND, tmp16);
-
+#endif
 	return 0;
 }
 
@@ -212,7 +215,7 @@  static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 		speed_s = "3";
 	else
 		speed_s = "?";
-
+#ifdef CONFIG_PCI
 	pci_read_config_word(pdev, 0x0a, &cc);
 	if (cc == 0x0101)
 		scc_s = "IDE";
@@ -222,7 +225,9 @@  static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 		scc_s = "RAID";
 	else
 		scc_s = "unknown";
-
+#else
+	scc_s = "SATA";
+#endif
 	printf("AHCI %02x%02x.%02x%02x "
 	       "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
 	       (vers >> 24) & 0xff,
@@ -249,6 +254,7 @@  static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 	       cap & (1 << 13) ? "part " : "");
 }
 
+#ifdef CONFIG_PCI
 static int ahci_init_one(pci_dev_t pdev)
 {
 	u16 vendor;
@@ -291,7 +297,7 @@  static int ahci_init_one(pci_dev_t pdev)
       err_out:
 	return rc;
 }
-
+#endif
 
 #define MAX_DATA_BYTE_COUNT  (4*1024*1024)
 
@@ -667,7 +673,9 @@  void scsi_low_level_init(int busdevfunc)
 	int i;
 	u32 linkmap;
 
+#ifdef CONFIG_PCI
 	ahci_init_one(busdevfunc);
+#endif
 
 	linkmap = probe_ent->link_port_map;
 
@@ -682,6 +690,48 @@  void scsi_low_level_init(int busdevfunc)
 	}
 }
 
+int ahci_init(u32 base)
+{
+	int i, rc = 0;
+	u32 linkmap;
+
+	memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
+
+	probe_ent = malloc(sizeof(struct ahci_probe_ent));
+	memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
+
+	probe_ent->host_flags = ATA_FLAG_SATA
+				| ATA_FLAG_NO_LEGACY
+				| ATA_FLAG_MMIO
+				| ATA_FLAG_PIO_DMA
+				| ATA_FLAG_NO_ATAPI;
+	probe_ent->pio_mask = 0x1f;
+	probe_ent->udma_mask = 0x7f;	/*Fixme,assume to support UDMA6 */
+
+	probe_ent->mmio_base = base;
+
+	/* initialize adapter */
+	rc = ahci_host_init(probe_ent);
+	if (rc)
+		goto err_out;
+
+	ahci_print_info(probe_ent);
+
+	linkmap = probe_ent->link_port_map;
+
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+		if (((linkmap >> i) & 0x01)) {
+			if (ahci_port_start((u8) i)) {
+				printf("Can not start port %d\n", i);
+				continue;
+			}
+			ahci_set_feature((u8) i);
+		}
+	}
+      err_out:
+	return rc;
+}
+
 
 void scsi_bus_reset(void)
 {