Patchwork [U-Boot] sh: Add Renesas rsk7264 board

login
register
mail settings
Submitter Phil Edworthy
Date May 31, 2011, 3:22 p.m.
Message ID <1306855369-17420-1-git-send-email-phil.edworthy@renesas.com>
Download mbox | patch
Permalink /patch/98046/
State Changes Requested
Headers show

Comments

Phil Edworthy - May 31, 2011, 3:22 p.m.
The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
with 64MB NAND flash and 64MB SDRAM. It is very similar to the
rsk7203 board.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 arch/sh/cpu/sh2/cpu.c                 |    7 +
 arch/sh/include/asm/cpu_sh2.h         |    2 +
 arch/sh/include/asm/cpu_sh7264.h      |   41 +++++++
 board/renesas/rsk7264/Makefile        |   32 +++++
 board/renesas/rsk7264/lowlevel_init.S |  212 +++++++++++++++++++++++++++++++++
 board/renesas/rsk7264/rsk7264.c       |   72 +++++++++++
 boards.cfg                            |    1 +
 drivers/serial/serial_sh.h            |    5 +-
 include/configs/rsk7264.h             |   99 +++++++++++++++
 9 files changed, 470 insertions(+), 1 deletions(-)
 create mode 100644 arch/sh/include/asm/cpu_sh7264.h
 create mode 100644 board/renesas/rsk7264/Makefile
 create mode 100644 board/renesas/rsk7264/lowlevel_init.S
 create mode 100644 board/renesas/rsk7264/rsk7264.c
 create mode 100644 include/configs/rsk7264.h

--
1.7.0.4
Nobuhiro Iwamatsu - June 1, 2011, 4:17 a.m.
On Tue, May 31, 2011 at 04:22:49PM +0100, Phil Edworthy wrote:
> The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
> with 64MB NAND flash and 64MB SDRAM. It is very similar to the
> rsk7203 board.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
>  arch/sh/cpu/sh2/cpu.c                 |    7 +
>  arch/sh/include/asm/cpu_sh2.h         |    2 +
>  arch/sh/include/asm/cpu_sh7264.h      |   41 +++++++
>  board/renesas/rsk7264/Makefile        |   32 +++++
>  board/renesas/rsk7264/lowlevel_init.S |  212 +++++++++++++++++++++++++++++++++
>  board/renesas/rsk7264/rsk7264.c       |   72 +++++++++++
>  boards.cfg                            |    1 +
>  drivers/serial/serial_sh.h            |    5 +-
>  include/configs/rsk7264.h             |   99 +++++++++++++++
>  9 files changed, 470 insertions(+), 1 deletions(-)
>  create mode 100644 arch/sh/include/asm/cpu_sh7264.h
>  create mode 100644 board/renesas/rsk7264/Makefile
>  create mode 100644 board/renesas/rsk7264/lowlevel_init.S
>  create mode 100644 board/renesas/rsk7264/rsk7264.c
>  create mode 100644 include/configs/rsk7264.h
> 
> diff --git a/arch/sh/cpu/sh2/cpu.c b/arch/sh/cpu/sh2/cpu.c
> index 6bbedd9..70c7258 100644
> --- a/arch/sh/cpu/sh2/cpu.c
> +++ b/arch/sh/cpu/sh2/cpu.c
> @@ -33,6 +33,9 @@
>  #define scif0_enable() do {\
>  		writeb(readb(STBCR4) & ~0x80, STBCR4);\
>  	} while (0)
> +#define scif3_enable() do {\
> +		writeb(readb(STBCR4) & ~0x10, STBCR4);\
> +	} while (0)
> 
>  int checkcpu(void)
>  {
> @@ -47,7 +50,11 @@ int checkcpu(void)
>  int cpu_init(void)
>  {
>  	/* SCIF enable */
> +#if defined(RSK7264)
> +	scif3_enable();
> +#else
>  	scif0_enable();
> +#endif
>  	/* CMT clock enable */
>  	cmt_clock_enable() ;
>  	return 0;

Please don't depends target board (RSK7264).
Please use CONFIG_CONS_SCIF3.

> diff --git a/arch/sh/include/asm/cpu_sh2.h b/arch/sh/include/asm/cpu_sh2.h
> index 8bc9bc6..767e189 100644
> --- a/arch/sh/include/asm/cpu_sh2.h
> +++ b/arch/sh/include/asm/cpu_sh2.h
> @@ -33,6 +33,8 @@

And you forget to update MAINTAINERS file.
Please add you to this file.

Best regards,
  Nobuhiro

Patch

diff --git a/arch/sh/cpu/sh2/cpu.c b/arch/sh/cpu/sh2/cpu.c
index 6bbedd9..70c7258 100644
--- a/arch/sh/cpu/sh2/cpu.c
+++ b/arch/sh/cpu/sh2/cpu.c
@@ -33,6 +33,9 @@ 
 #define scif0_enable() do {\
 		writeb(readb(STBCR4) & ~0x80, STBCR4);\
 	} while (0)
+#define scif3_enable() do {\
+		writeb(readb(STBCR4) & ~0x10, STBCR4);\
+	} while (0)

 int checkcpu(void)
 {
@@ -47,7 +50,11 @@  int checkcpu(void)
 int cpu_init(void)
 {
 	/* SCIF enable */
+#if defined(RSK7264)
+	scif3_enable();
+#else
 	scif0_enable();
+#endif
 	/* CMT clock enable */
 	cmt_clock_enable() ;
 	return 0;
diff --git a/arch/sh/include/asm/cpu_sh2.h b/arch/sh/include/asm/cpu_sh2.h
index 8bc9bc6..767e189 100644
--- a/arch/sh/include/asm/cpu_sh2.h
+++ b/arch/sh/include/asm/cpu_sh2.h
@@ -33,6 +33,8 @@ 

 #if defined(CONFIG_CPU_SH7203)
 # include <asm/cpu_sh7203.h>
+#elif defined(CONFIG_CPU_SH7264)
+# include <asm/cpu_sh7264.h>
 #else
 # error "Unknown SH2 variant"
 #endif
diff --git a/arch/sh/include/asm/cpu_sh7264.h b/arch/sh/include/asm/cpu_sh7264.h
new file mode 100644
index 0000000..a4a4d51
--- /dev/null
+++ b/arch/sh/include/asm/cpu_sh7264.h
@@ -0,0 +1,41 @@ 
+#ifndef _ASM_CPU_SH7264_H_
+#define _ASM_CPU_SH7264_H_
+
+/* Cache */
+#define CCR1		0xFFFC1000
+#define CCR		CCR1
+
+/* PFC */
+#define PACR		0xA4050100
+#define PBCR		0xA4050102
+#define PCCR		0xA4050104
+#define PETCR		0xA4050106
+
+/* Port Data Registers */
+#define PADR		0xA4050120
+#define PBDR		0xA4050122
+#define PCDR		0xA4050124
+
+/* BSC */
+
+/* SDRAM controller */
+
+/* SCIF */
+#define SCSMR_3		0xFFFE9800
+#define SCIF3_BASE	SCSMR_3
+
+/* Timer(CMT) */
+#define CMSTR		0xFFFEC000
+#define CMCSR_0 	0xFFFEC002
+#define CMCNT_0 	0xFFFEC004
+#define CMCOR_0 	0xFFFEC006
+#define CMCSR_1 	0xFFFEC008
+#define CMCNT_1 	0xFFFEC00A
+#define CMCOR_1		0xFFFEC00C
+
+/* On chip oscillator circuits */
+#define FRQCR		0xA415FF80
+#define WTCNT		0xA415FF84
+#define WTCSR		0xA415FF86
+
+#endif	/* _ASM_CPU_SH7264_H_ */
diff --git a/board/renesas/rsk7264/Makefile b/board/renesas/rsk7264/Makefile
new file mode 100644
index 0000000..a0ffc87
--- /dev/null
+++ b/board/renesas/rsk7264/Makefile
@@ -0,0 +1,32 @@ 
+#
+# Copyright (C) 2011 Renesas Electronics Europe Ltd.
+#
+# This file is released under the terms of GPL v2 and any later version.
+# See the file COPYING in the root directory of the source tree for details.
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).o
+
+OBJS	:= rsk7264.o
+SOBJS	:= lowlevel_init.o
+
+LIB	:= $(addprefix $(obj),$(LIB))
+OBJS	:= $(addprefix $(obj),$(OBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/renesas/rsk7264/lowlevel_init.S b/board/renesas/rsk7264/lowlevel_init.S
new file mode 100644
index 0000000..fc759bd
--- /dev/null
+++ b/board/renesas/rsk7264/lowlevel_init.S
@@ -0,0 +1,212 @@ 
+/*
+ * Copyright (C) 2011 Renesas Electronics Europe Ltd.
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ *
+ * Based on board/renesas/rsk7203/lowlevel_init.S
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	/* Cache setting */
+	write32	CCR1_A ,CCR1_D
+
+	/* io_set_cpg */
+	write8 STBCR3_A, STBCR3_D
+	write8 STBCR4_A, STBCR4_D
+	write8 STBCR5_A, STBCR5_D
+	write8 STBCR6_A, STBCR6_D
+	write8 STBCR7_A, STBCR7_D
+	write8 STBCR8_A, STBCR8_D
+
+	/* ConfigurePortPins */
+
+	/* Leaving LED1 ON for sanity test */
+	write16 PJCR1_A, PJCR1_D1
+	write16 PJCR2_A, PJCR2_D
+	write16 PJIOR0_A, PJIOR0_D1
+	write16 PJDR0_A, PJDR0_D
+	write16 PJPR0_A, PJPR0_D
+
+	/* Configure EN_PIN & RS_PIN */
+	write16 PGCR2_A, PGCR2_D
+	write16 PGIOR0_A, PGIOR0_D
+
+	/* Configure the port pins connected to UART */
+	write16 PJCR1_A, PJCR1_D2
+	write16 PJIOR0_A, PJIOR0_D2
+
+	/* Configure Operating Frequency */
+	write16	WTCSR_A, WTCSR_D0
+	write16	WTCSR_A, WTCSR_D1
+	write16	WTCNT_A, WTCNT_D
+
+	/* Control of RESBANK */
+	write16 IBNR_A, IBNR_D
+	/* Enable SCIF3 module */
+	write16 STBCR4_A, STBCR4_D
+
+	/* Set clock mode*/
+	write16	FRQCR_A, FRQCR_D
+
+	/* Configure Bus And Memory */
+init_bsc_cs0:
+
+pfc_settings:
+	write16 PCCR2_A, PCCR2_D
+	write16 PCCR1_A, PCCR1_D
+	write16 PCCR0_A, PCCR0_D
+
+	write16 PBCR0_A, PBCR0_D
+	write16 PBCR1_A, PBCR1_D
+	write16 PBCR2_A, PBCR2_D
+	write16 PBCR3_A, PBCR3_D
+	write16 PBCR4_A, PBCR4_D
+	write16 PBCR5_A, PBCR5_D
+
+	write16 PDCR0_A, PDCR0_D
+	write16 PDCR1_A, PDCR1_D
+	write16 PDCR2_A, PDCR2_D
+	write16 PDCR3_A, PDCR3_D
+
+	write32 CS0WCR_A, CS0WCR_D
+	write32 CS0BCR_A, CS0BCR_D
+
+init_bsc_cs2:
+	write16	PJCR0_A, PJCR0_D
+	write32	CS2WCR_A, CS2WCR_D
+
+init_sdram:
+	write32	CS3BCR_A, CS3BCR_D
+	write32	CS3WCR_A, CS3WCR_D
+	write32	SDCR_A, SDCR_D
+	write32	RTCOR_A, RTCOR_D
+	write32	RTCSR_A, RTCSR_D
+
+	/* wait 200us */
+	mov.l	REPEAT_D, r3
+	mov	#0, r2
+repeat0:
+	add	#1, r2
+	cmp/hs	r3, r2
+	bf	repeat0
+	nop
+
+	mov.l	SDRAM_MODE, r1
+	mov	#0, r0
+	mov.l	r0, @r1
+
+	nop
+	rts
+
+	.align 4
+
+CCR1_A:		.long CCR1
+CCR1_D:		.long 0x0000090B
+FRQCR_A:	.long 0xFFFE0010
+FRQCR_D:	.word 0x1003
+.align 2
+STBCR3_A:	.long 0xFFFE0408
+STBCR3_D:	.long 0x00000002
+STBCR4_A:	.long 0xFFFE040C
+STBCR4_D:	.word 0x0000
+.align 2
+STBCR5_A:	.long 0xFFFE0410
+STBCR5_D:	.long 0x00000010
+STBCR6_A:	.long 0xFFFE0414
+STBCR6_D:	.long 0x00000002
+STBCR7_A:	.long 0xFFFE0418
+STBCR7_D:	.long 0x0000002A
+STBCR8_A:	.long 0xFFFE041C
+STBCR8_D:	.long 0x0000007E
+PJCR1_A:	.long 0xFFFE390C
+PJCR1_D1:	.word 0x0000
+PJCR1_D2:	.word 0x0022
+PJCR2_A:	.long 0xFFFE390A
+PJCR2_D:	.word 0x0000
+.align 2
+PJIOR0_A:	.long 0xFFFE3912
+PJIOR0_D1:	.word 0x0FC0
+PJIOR0_D2:	.word 0x0FE0
+PJDR0_A:	.long 0xFFFE3916
+PJDR0_D:	.word 0x0FBF
+.align 2
+PJPR0_A:	.long 0xFFFE391A
+PJPR0_D:	.long 0x00000FBF
+PGCR2_A:	.long 0xFFFE38CA
+PGCR2_D:	.word 0x0000
+.align 2
+PGIOR0_A:	.long 0xFFFE38D2
+PGIOR0_D:	.word 0x03F0
+.align 2
+WTCSR_A:	.long 0xFFFE0000
+WTCSR_D0:	.word 0x0000
+WTCSR_D1:	.word 0x0000
+WTCNT_A:	.long 0xFFFE0002
+WTCNT_D:	.word 0x0000
+.align 2
+PCCR0_A:	.long 0xFFFE384E
+PDCR0_A:	.long 0xFFFE386E
+PDCR1_A:	.long 0xFFFE386C
+PDCR2_A:	.long 0xFFFE386A
+PDCR3_A:	.long 0xFFFE3868
+PBCR0_A:	.long 0xFFFE382E
+PBCR1_A:	.long 0xFFFE382C
+PBCR2_A:	.long 0xFFFE382A
+PBCR3_A:	.long 0xFFFE3828
+PBCR4_A:	.long 0xFFFE3826
+PBCR5_A:	.long 0xFFFE3824
+PCCR0_D:	.word 0x1111
+PDCR0_D:	.word 0x1111
+PDCR1_D:	.word 0x1111
+PDCR2_D:	.word 0x1111
+PDCR3_D:	.word 0x1111
+PBCR0_D:	.word 0x1110
+PBCR1_D:	.word 0x1111
+PBCR2_D:	.word 0x1111
+PBCR3_D:	.word 0x1111
+PBCR4_D:	.word 0x1111
+PBCR5_D:	.word 0x0111
+.align 2
+CS0WCR_A:	.long 0xFFFC0028
+CS0WCR_D:	.long 0x00000B41
+CS0BCR_A:	.long 0xFFFC0004
+CS0BCR_D:	.long 0x10000400
+PJCR0_A:	.long 0xFFFE390E
+PJCR0_D:	.word 0x0300
+.align 2
+CS2WCR_A:	.long 0xFFFC0030
+CS2WCR_D:	.long 0x00000B01
+PCCR2_A:	.long 0xFFFE384A
+PCCR2_D:	.word 0x0001
+.align 2
+PCCR1_A:	.long 0xFFFE384C
+PCCR1_D:	.word 0x1111
+.align 2
+CS3BCR_A:	.long 0xFFFC0010
+CS3BCR_D:	.long 0x00004400
+CS3WCR_A:	.long 0xFFFC0034
+CS3WCR_D:	.long 0x0000288A
+SDCR_A:		.long 0xFFFC004C
+SDCR_D:		.long 0x00000812
+RTCOR_A:	.long 0xFFFC0058
+RTCOR_D:	.long 0xA55A0046
+RTCSR_A:	.long 0xFFFC0050
+RTCSR_D:	.long 0xA55A0010
+IBNR_A:		.long 0xFFFE080E
+IBNR_D:	.word 0x0000
+.align 2
+SDRAM_MODE:	.long 0xFFFC5040
+REPEAT_D:	.long 0x00000085
diff --git a/board/renesas/rsk7264/rsk7264.c b/board/renesas/rsk7264/rsk7264.c
new file mode 100644
index 0000000..c23815d
--- /dev/null
+++ b/board/renesas/rsk7264/rsk7264.c
@@ -0,0 +1,72 @@ 
+/*
+ * Copyright (C) 2011 Renesas Electronics Europe Ltd.
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ *
+ * Based on u-boot/board/rsk7264/rsk7203.c
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("BOARD: Renesas Technology RSK7264\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
+
+/*
+ * The RSK board has the SMSC89218 wired up 'incorrectly'.
+ * Byte-swapping is necessary, and so poor performance is inevitable.
+ * This problem cannot evade by the swap function of CHIP, this can
+ * evade by software Byte-swapping.
+ * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ * functions necessary to solve this problem.
+ */
+u32 pkt_data_pull(struct eth_device *dev, u32 addr)
+{
+	volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
+	return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
+				| swab16(*(addr_16 + 1));
+}
+
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
+{
+	addr += dev->iobase;
+	*(volatile u16 *)(addr + 2) = swab16((u16)val);
+	*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
diff --git a/boards.cfg b/boards.cfg
index 9f2b118..23c18fc 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -821,6 +821,7 @@  xilinx-ppc405-generic_flash  powerpc     ppc4xx      ppc405-generic      xilinx
 xilinx-ppc440-generic        powerpc     ppc4xx      ppc440-generic      xilinx         -           xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1
 xilinx-ppc440-generic_flash  powerpc     ppc4xx      ppc440-generic      xilinx         -           xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
 rsk7203                      sh          sh2         rsk7203             renesas        -
+rsk7264                      sh          sh2         rsk7264             renesas        -
 mpr2                         sh          sh3         mpr2                -              -
 ms7720se                     sh          sh3         ms7720se            -              -
 shmin                        sh          sh3         shmin               -              -
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index e19593c..4e16e48 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -177,7 +177,8 @@  struct uart_port {
 #elif defined(CONFIG_CPU_SH7201) || \
 	defined(CONFIG_CPU_SH7203) || \
 	defined(CONFIG_CPU_SH7206) || \
-	defined(CONFIG_CPU_SH7263)
+	defined(CONFIG_CPU_SH7263) || \
+	defined(CONFIG_CPU_SH7264)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
@@ -685,6 +686,8 @@  static inline int scbrr_calc(struct uart_port port, int bps, int clk)
 #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
+#elif defined(CONFIG_CPU_SH7264)
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps))
 #else /* Generic SH */
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
 #endif
diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
new file mode 100644
index 0000000..aef37d0
--- /dev/null
+++ b/include/configs/rsk7264.h
@@ -0,0 +1,99 @@ 
+/*
+ * Configuation settings for the Renesas Technology RSK 7264
+ *
+ * Copyright (C) 2011 Renesas Electronics Europe Ltd.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __RSK7264_H
+#define __RSK7264_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH2		1
+#define CONFIG_SH2A		1
+#define CONFIG_CPU_SH7264	1
+#define CONFIG_RSK7264	1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTARGS		"console=ttySC3,115200"
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_LOADADDR		0x0C100000 /* RSK7264_SDRAM_BASE + 1MB */
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define RSK7264_SDRAM_BASE	0x0C000000
+#define RSK7264_FLASH_BASE_1	0x20000000	/* Non cache */
+
+#define CONFIG_SYS_TEXT_BASE	0x0C1C0000
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE	256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS	16	/* max args accepted for monitor commands */
+/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BARGSIZE	512
+/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF3	1
+
+#define CONFIG_SYS_MEMTEST_START	RSK7264_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024))
+
+#define CONFIG_SYS_SDRAM_BASE		RSK7264_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE		RSK7264_FLASH_BASE_1
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH 	FLASH_CFI_16BIT
+#undef	CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_BASE		RSK7264_FLASH_BASE_1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define CMT_CLK_DIVIDER	32	/* 8 (default), 32, 128 or 512 */
+#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+
+/* Network interface */
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_SMC911X_BASE (0x28000000)
+
+#endif	/* __RSK7264_H */