diff mbox series

[U-Boot] configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig

Message ID 1538983204-32488-1-git-send-email-eugen.hristev@microchip.com
State Accepted
Commit 76892d0115d9a81c65ae09226a0dd61fb0059caf
Delegated to: Tom Rini
Headers show
Series [U-Boot] configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig | expand

Commit Message

Eugen Hristev Oct. 8, 2018, 7:20 a.m. UTC 
Enable onewire support and commands, fdt overlay for the emmc defconfig.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Enable them for emmc defconfig as it's already enabled for mmc defconfig
sama5d2_xplained_mmc_defconfig

Also resynced with savedefconfig.

Thanks!

 configs/sama5d2_xplained_emmc_defconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Tom Rini Oct. 22, 2018, 5:25 p.m. UTC | #1 
On Mon, Oct 08, 2018 at 10:20:04AM +0300, Eugen Hristev wrote:

> Enable onewire support and commands, fdt overlay for the emmc defconfig.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index ad58f21..4e61692 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -15,7 +15,6 @@  CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -40,6 +39,7 @@  CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
@@ -85,3 +85,8 @@  CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_DM_VIDEO=y
 CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y