| Message ID | 20181006100718.3482-4-contact@paulk.fr |
|---|---|
| State | Changes Requested |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | [U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high | expand |
Hi, On Sat, Oct 06, 2018 at 12:07:18PM +0200, Paul Kocialkowski wrote: > This introduces a new defconfig for the BananaPi, which includes support > for the BL035 LCD module distributed by Lemaker for use with this board. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > configs/Bananapi_LCD_BL035_defconfig | 29 ++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 configs/Bananapi_LCD_BL035_defconfig > > diff --git a/configs/Bananapi_LCD_BL035_defconfig b/configs/Bananapi_LCD_BL035_defconfig > new file mode 100644 > index 0000000000..b0a8fb9099 > --- /dev/null > +++ b/configs/Bananapi_LCD_BL035_defconfig > @@ -0,0 +1,29 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN7I=y > +CONFIG_DRAM_CLK=432 > +CONFIG_MACPWR="PH23" > +CONFIG_VIDEO_COMPOSITE=y > +CONFIG_VIDEO_LCD_MODE="x:320,y:240,depth:24,pclk_khz:7000,le:38,ri:20,up:15,lo:4,hs:30,vs:3,sync:0,vmode:0" > +CONFIG_VIDEO_LCD_DE_LOW=y > +CONFIG_VIDEO_LCD_POWER="PH12" > +CONFIG_VIDEO_LCD_BL_EN="PH8" > +CONFIG_VIDEO_LCD_BL_PWM="PB2" > +# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set > +CONFIG_GMAC_TX_DELAY=3 > +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" > +CONFIG_AHCI=y > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL_I2C_SUPPORT=y > +# CONFIG_CMD_FLASH is not set > +# CONFIG_SPL_DOS_PARTITION is not set > +# CONFIG_SPL_EFI_PARTITION is not set > +CONFIG_NETCONSOLE=y This is something of a user configuration, this should be selected by each user if relevant. Maxime
diff --git a/configs/Bananapi_LCD_BL035_defconfig b/configs/Bananapi_LCD_BL035_defconfig new file mode 100644 index 0000000000..b0a8fb9099 --- /dev/null +++ b/configs/Bananapi_LCD_BL035_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 +CONFIG_MACPWR="PH23" +CONFIG_VIDEO_COMPOSITE=y +CONFIG_VIDEO_LCD_MODE="x:320,y:240,depth:24,pclk_khz:7000,le:38,ri:20,up:15,lo:4,hs:30,vs:3,sync:0,vmode:0" +CONFIG_VIDEO_LCD_DE_LOW=y +CONFIG_VIDEO_LCD_POWER="PH12" +CONFIG_VIDEO_LCD_BL_EN="PH8" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set +CONFIG_GMAC_TX_DELAY=3 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_NETCONSOLE=y +CONFIG_SCSI_AHCI=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
This introduces a new defconfig for the BananaPi, which includes support for the BL035 LCD module distributed by Lemaker for use with this board. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- configs/Bananapi_LCD_BL035_defconfig | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 configs/Bananapi_LCD_BL035_defconfig